Sorry for cross posting, not too sure which group should I post this
question.
Is there a way that one can laminate art prints (posters) at home ? I
have some
art prints which I want to hang at home and I like the way some shops
glue and
laminte prints onto boards with some sort of non-glossy laminate
texture finish. Is there a way I can do it at home other than paying
the shop $150 each ?
"Dilettante" <[email protected]> wrote in message
news:[email protected]...
> "Chris" <[email protected]> wrote in message news
>
> > Plaque mounts for posters are relatively cheap - or should be. Here they
> > cost around 50$ US for a 2'x3' poster.
> > If you want to go real cheap...
>
> Is this what you use for your kiddie porn pictures?
>
Why bring your obsession with kiddie porn into an art newsgroup all the
time? Are you hoping that you'll get a visit from the police so you can be
cured of our obsession by a long term inside?
--
"I can generally manage to attend to more than one thing at a time," said
Serena, rashly; "I think I must have a sort of double brain."
"Much better to economise and have one really good one," observed Lady
Caroline. - Saki The Unbearable Bassington
"Shawn "Me" Hearn" <[email protected]> wrote in message
news:[email protected]...
> In article <[email protected]>,
> [email protected] (JW) wrote:
>
> > Sorry for cross posting, not too sure which group should I post this
> > question.
> >
> > Is there a way that one can laminate art prints (posters) at home ? I
> > have some
> > art prints which I want to hang at home and I like the way some shops
> > glue and
> > laminte prints onto boards with some sort of non-glossy laminate
> > texture finish. Is there a way I can do it at home other than paying
> > the shop $150 each ?
>
> Why bother laminating the prints? You can go to a good art supply store
> such as Michaels and buy inexpensive frames for your prints.
Sure, but unless you dry mount them they'll end up with ripples in the
poster paper under the glass and you'll have an unattractive and very non
professional looking result.
And at poster size even those metal frames that come in sets of two pieces
each can run into some real money. If you want something that looks decent
you don't even want to think about those flimsy little pieces of plastic
that snap on. They start to sag and fall off within a couple months, at
least that's been my experience.
In article <[email protected]>,
[email protected] (JW) wrote:
> Sorry for cross posting, not too sure which group should I post this
> question.
>
> Is there a way that one can laminate art prints (posters) at home ? I
> have some
> art prints which I want to hang at home and I like the way some shops
> glue and
> laminte prints onto boards with some sort of non-glossy laminate
> texture finish. Is there a way I can do it at home other than paying
> the shop $150 each ?
In my experience, laminate yellows after a while.
Andy D.
"Chris" <[email protected]> wrote in message news
> Plaque mounts for posters are relatively cheap - or should be. Here they
> cost around 50$ US for a 2'x3' poster.
> If you want to go real cheap...
Is this what you use for your kiddie porn pictures?
Dilettante
hurry spits:
>> Plaque mounts for posters are relatively cheap - or should be. Here they
>> cost around 50$ US for a 2'x3' poster.
>> If you want to go real cheap...
>
>Is this what you use for your kiddie porn pictures?
Ta, assholes. This is a woodworking group you're crossposting to. We tried
helping. It's simpler to twit filter you.
Charlie Self
"Health food makes me sick." Calvin Trillin
http://hometown.aol.com/charliediy/myhomepage/business.html
I would use a 3M spray mount product called Super 77 or similar spray mount.
It would basically turn the poster into a big post-it note (albeit a little
bit stickier) which you could then stick onto a board. Not sure about what
to use for the non-gloss laminate look.
-T
"JW" <[email protected]> wrote in message
news:[email protected]...
> Sorry for cross posting, not too sure which group should I post this
> question.
>
> Is there a way that one can laminate art prints (posters) at home ? I
> have some
> art prints which I want to hang at home and I like the way some shops
> glue and
> laminte prints onto boards with some sort of non-glossy laminate
> texture finish. Is there a way I can do it at home other than paying
> the shop $150 each ?
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.592 / Virus Database: 375 - Release Date: 2/18/2004
T responds:
>I would use a 3M spray mount product called Super 77 or similar spray mount.
>It would basically turn the poster into a big post-it note (albeit a little
>bit stickier) which you could then stick onto a board. Not sure about what
>to use for the non-gloss laminate look.
>
There used to be a sheet adhesive mount, many, many moons ago, for photos.
Don't know if it still exists or not. That and a warm iron worked nicely. Then
a nice matte art spray to dull the surface.
But the last time I did that was some time back in the early or mid-70s.
The OP might google for sheet adhesives, or something similar and follow the
trail from there.
Charlie Self
"Health food makes me sick." Calvin Trillin
http://hometown.aol.com/charliediy/myhomepage/business.html
Charlie Self said:
>
>There used to be a sheet adhesive mount, many, many moons ago, for photos.
>Don't know if it still exists or not. That and a warm iron worked nicely.
>Then
>a nice matte art spray to dull the surface.
>
>But the last time I did that was some time back in the early or mid-70s.
>
>The OP might google for sheet adhesives, or something similar and follow the
>trail from there.
And I tried. Found about 3-4 useful looking pressure (very light) transfer
adhesives in 11x14 and 9x12 sheets, around 16 bucks for 10.
No heat needed, apparently.
Charlie Self
"Health food makes me sick." Calvin Trillin
http://hometown.aol.com/charliediy/myhomepage/business.html
On 19 Feb 2004 00:08:27 GMT, [email protected] (Charlie Self)
wrote:
>There used to be a sheet adhesive mount, many, many moons ago, for photos.
>Don't know if it still exists or not. That and a warm iron worked nicely. Then
>a nice matte art spray to dull the surface.
I used that stuff in a night college photo class recently. It does
still exist, I bought mine at an art / framing supply house.
I remember it being called "dry mount paper".
Barry
B a r r y wrote:
> I used that stuff in a night college photo class recently. It does
> still exist, I bought mine at an art / framing supply house.
>
> I remember it being called "dry mount paper".
Dry Mount Tissue.
I hope the OP is doing this mounting to cheap posters as dry mount, glue and
lamination will degrade the poster, physically, visually and monetarily.
If the posters have collectable value either now or in the future you'll pretty
much destroy that value by using dry mount, glue or lamination. But hey, that's
what makes the unperverted posters worth so much.
I would have mat cut and mount them in frames. As my professor who did archival
preservation said, do it right and they'll look this good in 100 years ....
--
Mark
N.E. Ohio
Never argue with a fool, a bystander can't tell you apart. (S. Clemens, A.K.A.
Mark Twain)
When in doubt hit the throttle. It may not help but it sure ends the suspense.
(Gaz, r.moto)
In article <[email protected]>,
[email protected] (JW) wrote:
> Sorry for cross posting, not too sure which group should I post this
> question.
>
> Is there a way that one can laminate art prints (posters) at home ? I
> have some
> art prints which I want to hang at home and I like the way some shops
> glue and
> laminte prints onto boards with some sort of non-glossy laminate
> texture finish. Is there a way I can do it at home other than paying
> the shop $150 each ?
Why bother laminating the prints? You can go to a good art supply store
such as Michaels and buy inexpensive frames for your prints.
Shawn notes:
>In article <[email protected]>,
> [email protected] (JW) wrote:
>
>> Sorry for cross posting, not too sure which group should I post this
>> question.
>>
>> Is there a way that one can laminate art prints (posters) at home ? I
>> have some
>> art prints which I want to hang at home and I like the way some shops
>> glue and
>> laminte prints onto boards with some sort of non-glossy laminate
>> texture finish. Is there a way I can do it at home other than paying
>> the shop $150 each ?
>
>Why bother laminating the prints? You can go to a good art supply store
>such as Michaels and buy inexpensive frames for your prints.
>
But the OP may prefer the look of lamination. I checked my Porter's
(www.porters.com) catalog earlier: lots of mounting tissue in there at
reasonable prices. Almost any photo shop should have similar stuff, art supply
stores may also and craft stores (Michael's) could carry some, though I don't
recall ever seeing it in the Michael's here--no longer in business, so I can't
check.
Charlie Self
"Health food makes me sick." Calvin Trillin
http://hometown.aol.com/charliediy/myhomepage/business.html
I put my posters in very light large frames that I bought at the local super
store. It has plastic instead of glass and once you lay your poster on
the mat and put on the plastic, you just push the frame (4 sections) on from
each side - and they are lightweight. Laminate just could make bubbles.
--
email: change the word cozy to cozyhomelife and change the word netscape to
net
JW <[email protected]> wrote in message
news:[email protected]...
> Sorry for cross posting, not too sure which group should I post this
> question.
>
> Is there a way that one can laminate art prints (posters) at home ? I
> have some
> art prints which I want to hang at home and I like the way some shops
> glue and
> laminte prints onto boards with some sort of non-glossy laminate
> texture finish. Is there a way I can do it at home other than paying
> the shop $150 each ?
Plaque mounts for posters are relatively cheap - or should be. Here they
cost around 50$ US for a 2'x3' poster.
If you want to go real cheap but relatively stable, try using acrylic medium
both as a glue (between the poster and the support) and a sealer (over the
poster). I've used this to try and preserve newsprint sketches, it works ok.
Cheers;
Chris
"T" <[email protected]> wrote in message
news:[email protected]...
> I would use a 3M spray mount product called Super 77 or similar spray
mount.
> It would basically turn the poster into a big post-it note (albeit a
little
> bit stickier) which you could then stick onto a board. Not sure about what
> to use for the non-gloss laminate look.
>
> -T
>
> "JW" <[email protected]> wrote in message
> news:[email protected]...
> > Sorry for cross posting, not too sure which group should I post this
> > question.
> >
> > Is there a way that one can laminate art prints (posters) at home ? I
> > have some
> > art prints which I want to hang at home and I like the way some shops
> > glue and
> > laminte prints onto boards with some sort of non-glossy laminate
> > texture finish. Is there a way I can do it at home other than paying
> > the shop $150 each ?
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.592 / Virus Database: 375 - Release Date: 2/18/2004
>
>