#5 type 19 98% japanning almost full blade clean $40
#5 Type 9 $50
#5 1/2c type9 japanning 95% small chip off top of tote $85
#5A Aluminum Clean w/ partial decal on tote $100 for those overhead planning
jobs
#6C Type 13 60% japanning small chip front right flare $50
English Steel infill with Sorby blade..normal nicks & dings rosewood
infill..wedge a bit chewed up, but doesn't detract from use.$140
Millers Falls #14 type 2(Stan equiv: #5 T17) $45
#10 type 6..carrige makers rabbet.beautiful patina..shortish blade..
apology's small chip out of right rear end of the flare sidewall small
square notch 1/4" in center of rear, almost looks like it was done from the
factory .chipped tote both cheeks solid .$140
#10 carrige makers rabbet apology sidewall above left cheek brazed..old
repair.. cracked and repaired tote still a good solid user..$100
10 ½ carrige makers rabbet..no apologies..beautiful shape.nice patina $165
# 190 rabbett..correct blade no depth stop(but one from a #78 fits) $25
#190 bull nose rabbet..well not exactly, it's a #190 with the front ground
off..works real well as a chisel plane.worth it for the blade(Stanley Rule &
level in arch circs 1915) and the cap iron and screw.$10
#18 type nickel flaking from cap but ready to work.$25
Serious Collectors only:
Picture 1
picture 2
9 ¾ type 5 block plane correct blade but short..ball knob in great
shape..plane fine patina a real hard plane to find, certainly very
good..could be cleaned to fine 85%+ japanning $ inquire
Walt Quadrato
489 Meadow St
Waterbury CT 06702
[email protected]
203-754-7805