PSA: Tool Disposal Notice! Harbor Freight Highlights

"mttt" <[email protected]> wrote in message
news:[email protected]...
> For those of you poor, downtrodden 'dorkers, without access to the Creme
de
> la Creme Equipment Supplier: Harbor Freight - I'm honored to share some of
> the highlights from the latest flyer. At least I think it's the latest
> flyer - hard to tell when they send one every other day.
>
> Tool Disposal Notice!
> Buy Now and Save!
>
> 10" Compound Slide Miter Saw $99.99 90891-1YJA
> 18g 3/8"-2" Brad Nailer $29.99 46309-2YJA (As

I don't know what you are looking at, but I just bought the 18g nailer for
$19.99! Works fine, though I expect it will not last long.
The cheap non-slide miter saw looks like a POS that would only be as a
chopsaw. They have a slider for $100?! I gotta go see that.

"John" <[email protected]> wrote in message news:<[email protected]>...
> "mttt" <[email protected]> wrote in message
> news:[email protected]...
> > For those of you poor, downtrodden 'dorkers, without access to the Creme
> de
> > la Creme Equipment Supplier: Harbor Freight - I'm honored to share some of
> > the highlights from the latest flyer. At least I think it's the latest
> > flyer - hard to tell when they send one every other day.
> >
> > Tool Disposal Notice!
> > Buy Now and Save!
> >
> > 10" Compound Slide Miter Saw $99.99 90891-1YJA
> > 18g 3/8"-2" Brad Nailer $29.99 46309-2YJA (As
>
> I don't know what you are looking at, but I just bought the 18g nailer for
> $19.99! Works fine, though I expect it will not last long.
> The cheap non-slide miter saw looks like a POS that would only be as a
> chopsaw. They have a slider for $100?! I gotta go see that.

I got the 18g brad nailer (3/8-1 3/8") for $14.99 and have used it
many times. While the safety mechanism will leave marks on softwoods
and that foam trim stuff, I have used it often for over a year and she
still shoots fine. In my opinion, if you need 2" nails you should
step to a 16g gun.
SS

In article <[email protected]>, John <[email protected]> wrote:
<...Previous quote snipped...>

>The cheap non-slide miter saw looks like a POS that would only be as a
>chopsaw. They have a slider for $100?! I gotta go see that.
>
>
HF has a new 10" SCMS. The old , discontinued model looked like a
Makita LS1011, with a single slide rail. The new model looks like a
Makita LS1013, with 2 rails. It's usually "on sale" at $99.99. I've
noticed a few other of their power tools appear to be Makita designs.



--

Larry Wasserman Baltimore, Maryland
[email protected]

Here is a copy of my recent order for a riser block. I have received the
roller blade guides but I haven't put them on yet. I'm also planning to
purchase a selection of Timberwolf blades after the riser arrives. Should
only be a few more months if the average delivery time I read about holds
true.

Dave


----------------------------------------------------------------

Thank You for Ordering from Harbor Freight Tools

Here is your Order Confirmation
Order ID:(snip)
Order Date:2004-05-18 12:53:57.646
***Order Summary***
1 9645-0ZZA BLOCK KIT, RISER, FOR 32208 @ $49.99
1 46370-0VGA BANDSAW ROLLER BLADE GUIDE,14" @ $9.99
Subtotal: 59.98
Tax Rate: 0.066
Tax Total: 3.96
Shipping: 0.00
Handling: 5.95
TOTAL: $69.89

your order will be sent via HFT Shipping
***NOTE: This is a copy of your order. Charges are not final until the order
is processed.***


----------------------------------------------------------------

"Rick Samuel" <[email protected]> wrote in message
news:[email protected]...
> Have the same band saw, but when I checked on a riser
> block, HF said "don't have it". Where did
> you get your riser?

Have the same band saw, but when I checked on a riser
block, HF said "don't have it". Where did
you get your riser?

John Moorhead wrote:

> Mttt...
>
> I've had the bandsaw with the riser block for about 4 years. While I don't
> think it's up to cutting acres of veneer, I am happy with the $219 I paid
> for it.
>
> I also have their 10" slider chop saw. I couldn't bring myself to put a
> Forrest blade in it because it cost more than the saw! I use it for my
> "knock about" and for rough work it's fine. My Bosch 4412 CSMS stays in the
> shop...
>
> YMMV...
>
>
> John Moorhead
>
> "mttt" <[email protected]> wrote in message
> news:[email protected]...
>
>>For those of you poor, downtrodden 'dorkers, without access to the Creme
>
> de
>
>>la Creme Equipment Supplier: Harbor Freight - I'm honored to share some of
>>the highlights from the latest flyer. At least I think it's the latest
>>flyer - hard to tell when they send one every other day.
>>
>>Tool Disposal Notice!
>>Buy Now and Save!
>>
>>10" Compound Slide Miter Saw $99.99 90891-1YJA
>>18g 3/8"-2" Brad Nailer $29.99 46309-2YJA (As reviewed by Fine
>
> Woodworking!)
>
>>14" 4 speed 'Dorking Bandsaw $299.99 32208-5YJA
>>18V Cordless 4 Tool Combo $39.99 90374-2YJA
>>8" C2 Tungsten Carbide Tipped Dado Blade Set $19.99 40745-4YJA
>>64oz Stainless Steel Pet Bowls (2!) $5.99 47385-2YJA
>>Mortising Machine $99.99 35570-2YJA
>>18V Cordless 4 Tool Combo $139.99 45803-4YJA (Hmmm wonder what's in the
>
> xtra
>
>>hunnert bux?)
>>14.4V Cordless 4 Tool Combo $79.99 40056-1YJA (Hmmm wonder what's in the
>>xtra forty bux?)
>>2HP Industrial Dust Collector $149.99 45378-3YJA
>>
>>A couple of popular jewels in that list.
>>Yur welcome.
>>
>>
>
>
>

Rick -

I ordered it over the phone after I purchased the saw. It took *Forever and
a Day* Like.... 2 months... but it did arrive. Go to the website and
download the product manual for the saw, item 32208. The riser parts
diagram is on page 25, with part numbers. That'll shut em up.

Hope this helps

John Moorhead

"Rick Samuel" <[email protected]> wrote in message
news:[email protected]...
> Have the same band saw, but when I checked on a riser
> block, HF said "don't have it". Where did
> you get your riser?
>
> John Moorhead wrote:
>
> > Mttt...
> >
> > I've had the bandsaw with the riser block for about 4 years. While I
don't
> > think it's up to cutting acres of veneer, I am happy with the $219 I
paid
> > for it.
> >
> > I also have their 10" slider chop saw. I couldn't bring myself to put a
> > Forrest blade in it because it cost more than the saw! I use it for my
> > "knock about" and for rough work it's fine. My Bosch 4412 CSMS stays in
the
> > shop...
> >
> > YMMV...
> >
> >
> > John Moorhead
> >
> > "mttt" <[email protected]> wrote in message
> > news:[email protected]...
> >
> >>For those of you poor, downtrodden 'dorkers, without access to the Creme
> >
> > de
> >
> >>la Creme Equipment Supplier: Harbor Freight - I'm honored to share some
of
> >>the highlights from the latest flyer. At least I think it's the latest
> >>flyer - hard to tell when they send one every other day.
> >>
> >>Tool Disposal Notice!
> >>Buy Now and Save!
> >>
> >>10" Compound Slide Miter Saw $99.99 90891-1YJA
> >>18g 3/8"-2" Brad Nailer $29.99 46309-2YJA (As reviewed by Fine
> >
> > Woodworking!)
> >
> >>14" 4 speed 'Dorking Bandsaw $299.99 32208-5YJA
> >>18V Cordless 4 Tool Combo $39.99 90374-2YJA
> >>8" C2 Tungsten Carbide Tipped Dado Blade Set $19.99 40745-4YJA
> >>64oz Stainless Steel Pet Bowls (2!) $5.99 47385-2YJA
> >>Mortising Machine $99.99 35570-2YJA
> >>18V Cordless 4 Tool Combo $139.99 45803-4YJA (Hmmm wonder what's in the
> >
> > xtra
> >
> >>hunnert bux?)
> >>14.4V Cordless 4 Tool Combo $79.99 40056-1YJA (Hmmm wonder what's in the
> >>xtra forty bux?)
> >>2HP Industrial Dust Collector $149.99 45378-3YJA
> >>
> >>A couple of popular jewels in that list.
> >>Yur welcome.
> >>
> >>
> >
> >
> >

On Thu, 10 Jun 2004 13:55:12 GMT, [email protected] (Lawrence
Wasserman) wrote:

>In article <[email protected]>, John <[email protected]> wrote:
><...Previous quote snipped...>
>
>>The cheap non-slide miter saw looks like a POS that would only be as a
>>chopsaw. They have a slider for $100?! I gotta go see that.
>>
>>
>HF has a new 10" SCMS. The old , discontinued model looked like a
>Makita LS1011, with a single slide rail. The new model looks like a
>Makita LS1013, with 2 rails. It's usually "on sale" at $99.99. I've
>noticed a few other of their power tools appear to be Makita designs.


look for Makita to discontinue it for a newer model then.

Mttt...

I've had the bandsaw with the riser block for about 4 years. While I don't
think it's up to cutting acres of veneer, I am happy with the $219 I paid
for it.

I also have their 10" slider chop saw. I couldn't bring myself to put a
Forrest blade in it because it cost more than the saw! I use it for my
"knock about" and for rough work it's fine. My Bosch 4412 CSMS stays in the
shop...

YMMV...


John Moorhead

"mttt" <[email protected]> wrote in message
news:[email protected]...
> For those of you poor, downtrodden 'dorkers, without access to the Creme
de
> la Creme Equipment Supplier: Harbor Freight - I'm honored to share some of
> the highlights from the latest flyer. At least I think it's the latest
> flyer - hard to tell when they send one every other day.
>
> Tool Disposal Notice!
> Buy Now and Save!
>
> 10" Compound Slide Miter Saw $99.99 90891-1YJA
> 18g 3/8"-2" Brad Nailer $29.99 46309-2YJA (As reviewed by Fine
Woodworking!)
> 14" 4 speed 'Dorking Bandsaw $299.99 32208-5YJA
> 18V Cordless 4 Tool Combo $39.99 90374-2YJA
> 8" C2 Tungsten Carbide Tipped Dado Blade Set $19.99 40745-4YJA
> 64oz Stainless Steel Pet Bowls (2!) $5.99 47385-2YJA
> Mortising Machine $99.99 35570-2YJA
> 18V Cordless 4 Tool Combo $139.99 45803-4YJA (Hmmm wonder what's in the
xtra
> hunnert bux?)
> 14.4V Cordless 4 Tool Combo $79.99 40056-1YJA (Hmmm wonder what's in the
> xtra forty bux?)
> 2HP Industrial Dust Collector $149.99 45378-3YJA
>
> A couple of popular jewels in that list.
> Yur welcome.
>
>