On Wed, 21 Apr 2004 22:23:09 GMT, "Roger Jensen" <[email protected]>
wrote:
>PC 690
these collets are readily available from porter cable- if what you
need is to replace a missing or damaged one, that is the route I'd
recommend.
on the other hand, if you're up to something a bit more exotic- making
a specialty collet or some other tooling, please let us know.....
I'm up to something very exotic ;) I really need the dimensions to be able
to fabricate an arbor using PC collets. Collets and the nut are not a
problem. The taper is what I would really like to know........ with of
course some .......degree of certainty.
Roger
<[email protected]> wrote in message
news:[email protected]...
> On Wed, 21 Apr 2004 22:23:09 GMT, "Roger Jensen" <[email protected]>
> wrote:
>
> >PC 690
>
>
>
>
> these collets are readily available from porter cable- if what you
> need is to replace a missing or damaged one, that is the route I'd
> recommend.
>
> on the other hand, if you're up to something a bit more exotic- making
> a specialty collet or some other tooling, please let us know.....
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.664 / Virus Database: 427 - Release Date: 4/21/2004
I inquired on two previous occasions with PC, they were not able to answer
off hand...but in both cases assured me they would get back to me with the
info. yea right... They did offer to sell me an armature for something near
to $90.00.
Roger
<[email protected]> wrote in message
news:[email protected]...
> On Thu, 22 Apr 2004 00:41:05 GMT, "Roger Jensen" <[email protected]>
> wrote:
>
> >I'm up to something very exotic ;) I really need the dimensions to be
able
> >to fabricate an arbor using PC collets. Collets and the nut are not a
> >problem. The taper is what I would really like to know........ with of
> >course some .......degree of certainty.
> >
> >Roger
> >
>
> I have this router, or rather a couple of them, and some reasonably
> accurate measuring equipment. not sure I could really get that angle
> good enough for you, but I'll be glad to try. have you asked PC?
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.664 / Virus Database: 427 - Release Date: 4/21/2004
Porter Cable.
"P©WÉ®T©©LMAN ²ºº4" <[email protected]> wrote in message
news:[email protected]...
>
> "Roger Jensen" <[email protected]> wrote in message
> news:[email protected]...
> > Does anyone know the dimension including TPI of the collet holder and
the
> > taper of the collet?
> >
> > Roger in Abilene
>
> Hi Roger,
> Sadly they are not always the same, which model??
>
> --
> © Jon Down ®
> http://www.stores.ebay.com/jdpowertoolcanada
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.664 / Virus Database: 427 - Release Date: 4/21/2004
"Roger Jensen" <[email protected]> wrote in message
news:[email protected]...
> Porter Cable.
Which model PC? PC makes about 10 different models.
On Thu, 22 Apr 2004 00:41:05 GMT, "Roger Jensen" <[email protected]>
wrote:
>I'm up to something very exotic ;) I really need the dimensions to be able
>to fabricate an arbor using PC collets. Collets and the nut are not a
>problem. The taper is what I would really like to know........ with of
>course some .......degree of certainty.
>
>Roger
>
I have this router, or rather a couple of them, and some reasonably
accurate measuring equipment. not sure I could really get that angle
good enough for you, but I'll be glad to try. have you asked PC?
PC 690
"Leon" <[email protected]> wrote in message
news:UcChc.19669$i%[email protected]...
>
> "Roger Jensen" <[email protected]> wrote in message
> news:[email protected]...
> > Porter Cable.
>
>
> Which model PC? PC makes about 10 different models.
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.664 / Virus Database: 427 - Release Date: 4/21/2004
"Roger Jensen" <[email protected]> wrote in message
news:[email protected]...
> Does anyone know the dimension including TPI of the collet holder and the
> taper of the collet?
>
> Roger in Abilene
Hi Roger,
Sadly they are not always the same, which model??
--
© Jon Down ®
http://www.stores.ebay.com/jdpowertoolcanada