Leon,
I believe you used to have a Delta RAS. One of the members of the RAS forum
just purchased a DeWalt 721 RAS in the UK which I believe is a Delta being
marketed by DeWalt/B&D in the UK.
He has the following problem:
"When I do a crosscut the cut is not quite square - what seems to be
happening is the blade enters the wood, and as it passes through, the back
of the blade takes a shaving off the left hand corner as the blade exits the
wood,there is scorching on the cut face as well"
This is an easy adjustment on the old USA DeWalts, but I don't know what to
suggest to this fellow for adjustment. Do you have any recommendations for
this adjustment?
--
Rumpty
Radial Arm Saw Forum: http://forums.delphiforums.com/woodbutcher/start
- - - - - - - - - - - - - - - - - - - - -
Thanks!
--
Rumpty
Radial Arm Saw Forum: http://forums.delphiforums.com/woodbutcher/start
- - - - - - - - - - - - - - - - - - - - -
"Leon" <[email protected]> wrote in message
news:[email protected]...
> Sorry Rumpty, I had a Craftsman RAS.
> I am clueless on how to adjust the rotation of the motor assembly to lock
in
> parallel to the arm.
>
>