And the answer is.........Hanger Bolts! see Rockler for pix & description:
http://www.rockler.com/ecom7/search_results.cfm?filter=hanger+bolt
The hanger bolt driver looks like a slick deal if you are going to use a
bunch of the things. Jam nuts and vise grips are loads of fun too.
Any hardware or borg _should_ have the bolts.
DexAZ
"Phil Crow" <[email protected]> wrote in message
news:[email protected]...
> It's got a machine screw on one side and a lag screw on the other. I
> have a dining table that has them and I figured one would be a good,
> ah, screw for a taper jig; i.e. lag the one side into the board,
> thread the wingnut onto the machine side.
>
> Thanks.
>
> -Phil Crow
Always called those "hanger bolts"
John
On 28 Feb 2004 08:39:30 -0800, [email protected] (Phil Crow)
wrote:
>It's got a machine screw on one side and a lag screw on the other. I
>have a dining table that has them and I figured one would be a good,
>ah, screw for a taper jig; i.e. lag the one side into the board,
>thread the wingnut onto the machine side.
>
>Thanks.
>
>-Phil Crow
On 28 Feb 2004 08:39:30 -0800, [email protected] (Phil Crow)
wrote:
>It's got a machine screw on one side and a lag screw on the other. I
>have a dining table that has them and I figured one would be a good,
>ah, screw for a taper jig; i.e. lag the one side into the board,
>thread the wingnut onto the machine side.
Hanger bolt.
- -
LRod
Master Woodbutcher and seasoned termite
Shamelessly whoring my website since 1999
http://www.woodbutcher.net