Funny thing. I was going to buy the Leigh FMT jig from Lee Valley and the
price listed was $1059 vs. $859 everywhere else. Guess it was a mistake
because now they have it listed for $749 - that's the cheapest I've seen it
anywhere. Guess it's time to order :).
"Ace" <[email protected]> wrote in message
news:lPLLb.10980$5V2.19014@attbi_s53...
> I got mine from Lee Valley. They are 10 bucks cheaper than everywhere else
> (12 dollars shipping). I also got the vacum attachment with it, and they
> were 2dollars cheaper that the rest.
>
> "william kossack" <[email protected]> wrote in message
> news:mVJLb.10961$I06.74237@attbi_s01...
> > My experience is that woodcraft prices on leigh jigs is a bit high. I
> > purchased my D4 a couple years ago from the local woodcraft (my first
> > big purchase like that).
> >
> > Go to the leigh webpage http://www.leighjigs.com/
> > where they list the places that sell their stuff this will get you links
> > and phone numbers to call to confirm availability and price.
> >
> > Either Leevalley or highlnad will have the lowest price.
> >
> > The guyes at highland are very helpful. I purchased an FMT and MMT from
> > them recently.
> > The guyes and leeValley are also very helpful. I got an F1 from them
> > this summer.
> > Finally, everyone at Leigh is extremely helpful. If I need a part I
> > call them direct and get it within the week. They will admit that you
> > can buy their jigs more cheeply from one of the suppliers but I've
> > ordered things like bits dirctly from them on Monday and had them by the
> > weekend instead of driving all the way to woodcraft and waiting for the
> > store to get them in stock (half the time I go to woodcraft for
> > something like a bit they don't have the size I need)
> >
> > Master Chef Richard Campbell wrote:
> >
> > >Hi all
> > >
> > >I keep just missing out on Leigh D4 auction on eBay. Where can I buy
one?
> If
> > >you have had good expierence with a reseller I would like to know.
> > >
> > >Chef
> > >
> > >
> > >
> > >
> >
>
>
Highland has the best price that I know of. I like dealing w/Lee-Veritas but you
can save a lot if you don't have to pay sales tax. Since I'm in NY I would have
to pay sales tax for Lee orders but not for Highland. I recall that shipping is
about the same.
Windywood
Master Chef Richard Campbell wrote:
> Hi all
>
> I keep just missing out on Leigh D4 auction on eBay. Where can I buy one? If
> you have had good expierence with a reseller I would like to know.
>
> Chef
"Master Chef Richard Campbell" <[email protected]> wrote in message news:<ezGLb.23876$P%[email protected]>...
> Hi all
>
> I keep just missing out on Leigh D4 auction on eBay. Where can I buy one? If
> you have had good expierence with a reseller I would like to know.
>
> Chef
Hello Master Chef:
Try WoodCraft....usually a fair price and also good service...many of
the stores have classes on the jig and they are very familiar with the
jig if you have a question or operating problem. We have 6 jigs here
at the school and I love the Leigh Jig. Easy to teach and easy for
the students to learn.
Good Luck,
Mike from American Sycamore
www.americansycamoreretreat.com
Highland Hardware. 800-241-6748. Been good to do business with.
Sam
"Master Chef Richard Campbell" <[email protected]> wrote in message
news:ezGLb.23876$P%[email protected]...
> Hi all
>
> I keep just missing out on Leigh D4 auction on eBay. Where can I buy one?
If
> you have had good expierence with a reseller I would like to know.
>
> Chef
>
>
the general rule is that once you buy something you will see it
somewhere else for less
Eric wrote:
>Funny thing. I was going to buy the Leigh FMT jig from Lee Valley and the
>price listed was $1059 vs. $859 everywhere else. Guess it was a mistake
>because now they have it listed for $749 - that's the cheapest I've seen it
>anywhere. Guess it's time to order :).
>
>
>"Ace" <[email protected]> wrote in message
>news:lPLLb.10980$5V2.19014@attbi_s53...
>
>
>>I got mine from Lee Valley. They are 10 bucks cheaper than everywhere else
>>(12 dollars shipping). I also got the vacum attachment with it, and they
>>were 2dollars cheaper that the rest.
>>
>>"william kossack" <[email protected]> wrote in message
>>news:mVJLb.10961$I06.74237@attbi_s01...
>>
>>
>>>My experience is that woodcraft prices on leigh jigs is a bit high. I
>>>purchased my D4 a couple years ago from the local woodcraft (my first
>>>big purchase like that).
>>>
>>>Go to the leigh webpage http://www.leighjigs.com/
>>>where they list the places that sell their stuff this will get you links
>>>and phone numbers to call to confirm availability and price.
>>>
>>>Either Leevalley or highlnad will have the lowest price.
>>>
>>>The guyes at highland are very helpful. I purchased an FMT and MMT from
>>>them recently.
>>>The guyes and leeValley are also very helpful. I got an F1 from them
>>>this summer.
>>>Finally, everyone at Leigh is extremely helpful. If I need a part I
>>>call them direct and get it within the week. They will admit that you
>>>can buy their jigs more cheeply from one of the suppliers but I've
>>>ordered things like bits dirctly from them on Monday and had them by the
>>>weekend instead of driving all the way to woodcraft and waiting for the
>>>store to get them in stock (half the time I go to woodcraft for
>>>something like a bit they don't have the size I need)
>>>
>>>Master Chef Richard Campbell wrote:
>>>
>>>
>>>
>>>>Hi all
>>>>
>>>>I keep just missing out on Leigh D4 auction on eBay. Where can I buy
>>>>
>>>>
>one?
>
>
>>If
>>
>>
>>>>you have had good expierence with a reseller I would like to know.
>>>>
>>>>Chef
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>
>>
>
>
>
>
I got mine from highland hardware. Arrived in great shape (original
packaging from Leigh, actually). I actually bought the combo D4+15 bit set
(also from Leigh). Here's a link:
http://www.tools-for-woodworking.com/product.asp?3=1114
Mike
"Master Chef Richard Campbell" <[email protected]> wrote in message
news:ezGLb.23876$P%[email protected]...
> Hi all
>
> I keep just missing out on Leigh D4 auction on eBay. Where can I buy one?
If
> you have had good expierence with a reseller I would like to know.
>
> Chef
>
>
that is why you really have to call them up. one thing can be less at
one place and another can be cheeper elsewhere
it does not cost much especially as most of them have 800 numbers
otherwise I've had reall good luck with emailing most companies
scottso wrote:
>Woodworkers Supply has them listed for $359.99US in their new winter 2004
>catalog but have them listed online for $389.99US.
>
>
>"william kossack" <[email protected]> wrote in message
>news:PY0Mb.17930$na.15647@attbi_s04...
>
>
>>the general rule is that once you buy something you will see it
>>somewhere else for less
>>
>>Eric wrote:
>>
>>
>>
>>>Funny thing. I was going to buy the Leigh FMT jig from Lee Valley and the
>>>price listed was $1059 vs. $859 everywhere else. Guess it was a mistake
>>>because now they have it listed for $749 - that's the cheapest I've seen
>>>
>>>
>it
>
>
>>>anywhere. Guess it's time to order :).
>>>
>>>
>>>"Ace" <[email protected]> wrote in message
>>>news:lPLLb.10980$5V2.19014@attbi_s53...
>>>
>>>
>>>
>>>
>>>>I got mine from Lee Valley. They are 10 bucks cheaper than everywhere
>>>>
>>>>
>else
>
>
>>>>(12 dollars shipping). I also got the vacum attachment with it, and they
>>>>were 2dollars cheaper that the rest.
>>>>
>>>>"william kossack" <[email protected]> wrote in message
>>>>news:mVJLb.10961$I06.74237@attbi_s01...
>>>>
>>>>
>>>>
>>>>
>>>>>My experience is that woodcraft prices on leigh jigs is a bit high. I
>>>>>purchased my D4 a couple years ago from the local woodcraft (my first
>>>>>big purchase like that).
>>>>>
>>>>>Go to the leigh webpage http://www.leighjigs.com/
>>>>>where they list the places that sell their stuff this will get you
>>>>>
>>>>>
>links
>
>
>>>>>and phone numbers to call to confirm availability and price.
>>>>>
>>>>>Either Leevalley or highlnad will have the lowest price.
>>>>>
>>>>>The guyes at highland are very helpful. I purchased an FMT and MMT
>>>>>
>>>>>
>from
>
>
>>>>>them recently.
>>>>>The guyes and leeValley are also very helpful. I got an F1 from them
>>>>>this summer.
>>>>>Finally, everyone at Leigh is extremely helpful. If I need a part I
>>>>>call them direct and get it within the week. They will admit that you
>>>>>can buy their jigs more cheeply from one of the suppliers but I've
>>>>>ordered things like bits dirctly from them on Monday and had them by
>>>>>
>>>>>
>the
>
>
>>>>>weekend instead of driving all the way to woodcraft and waiting for the
>>>>>store to get them in stock (half the time I go to woodcraft for
>>>>>something like a bit they don't have the size I need)
>>>>>
>>>>>Master Chef Richard Campbell wrote:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>Hi all
>>>>>>
>>>>>>I keep just missing out on Leigh D4 auction on eBay. Where can I buy
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>one?
>>>
>>>
>>>
>>>
>>>>If
>>>>
>>>>
>>>>
>>>>
>>>>>>you have had good expierence with a reseller I would like to know.
>>>>>>
>>>>>>Chef
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>
>
>
>
I got mine from Lee Valley. They are 10 bucks cheaper than everywhere else
(12 dollars shipping). I also got the vacum attachment with it, and they
were 2dollars cheaper that the rest.
"william kossack" <[email protected]> wrote in message
news:mVJLb.10961$I06.74237@attbi_s01...
> My experience is that woodcraft prices on leigh jigs is a bit high. I
> purchased my D4 a couple years ago from the local woodcraft (my first
> big purchase like that).
>
> Go to the leigh webpage http://www.leighjigs.com/
> where they list the places that sell their stuff this will get you links
> and phone numbers to call to confirm availability and price.
>
> Either Leevalley or highlnad will have the lowest price.
>
> The guyes at highland are very helpful. I purchased an FMT and MMT from
> them recently.
> The guyes and leeValley are also very helpful. I got an F1 from them
> this summer.
> Finally, everyone at Leigh is extremely helpful. If I need a part I
> call them direct and get it within the week. They will admit that you
> can buy their jigs more cheeply from one of the suppliers but I've
> ordered things like bits dirctly from them on Monday and had them by the
> weekend instead of driving all the way to woodcraft and waiting for the
> store to get them in stock (half the time I go to woodcraft for
> something like a bit they don't have the size I need)
>
> Master Chef Richard Campbell wrote:
>
> >Hi all
> >
> >I keep just missing out on Leigh D4 auction on eBay. Where can I buy one?
If
> >you have had good expierence with a reseller I would like to know.
> >
> >Chef
> >
> >
> >
> >
>
My experience is that woodcraft prices on leigh jigs is a bit high. I
purchased my D4 a couple years ago from the local woodcraft (my first
big purchase like that).
Go to the leigh webpage http://www.leighjigs.com/
where they list the places that sell their stuff this will get you links
and phone numbers to call to confirm availability and price.
Either Leevalley or highlnad will have the lowest price.
The guyes at highland are very helpful. I purchased an FMT and MMT from
them recently.
The guyes and leeValley are also very helpful. I got an F1 from them
this summer.
Finally, everyone at Leigh is extremely helpful. If I need a part I
call them direct and get it within the week. They will admit that you
can buy their jigs more cheeply from one of the suppliers but I've
ordered things like bits dirctly from them on Monday and had them by the
weekend instead of driving all the way to woodcraft and waiting for the
store to get them in stock (half the time I go to woodcraft for
something like a bit they don't have the size I need)
Master Chef Richard Campbell wrote:
>Hi all
>
>I keep just missing out on Leigh D4 auction on eBay. Where can I buy one? If
>you have had good expierence with a reseller I would like to know.
>
>Chef
>
>
>
>
LeeValley
--
Mike
"Master Chef Richard Campbell" <[email protected]> a écrit dans le
message de news:ezGLb.23876$P%[email protected]...
> Hi all
>
> I keep just missing out on Leigh D4 auction on eBay. Where can I buy one?
If
> you have had good expierence with a reseller I would like to know.
>
> Chef
>
>
Woodworkers Supply has them listed for $359.99US in their new winter 2004
catalog but have them listed online for $389.99US.
"william kossack" <[email protected]> wrote in message
news:PY0Mb.17930$na.15647@attbi_s04...
> the general rule is that once you buy something you will see it
> somewhere else for less
>
> Eric wrote:
>
> >Funny thing. I was going to buy the Leigh FMT jig from Lee Valley and the
> >price listed was $1059 vs. $859 everywhere else. Guess it was a mistake
> >because now they have it listed for $749 - that's the cheapest I've seen
it
> >anywhere. Guess it's time to order :).
> >
> >
> >"Ace" <[email protected]> wrote in message
> >news:lPLLb.10980$5V2.19014@attbi_s53...
> >
> >
> >>I got mine from Lee Valley. They are 10 bucks cheaper than everywhere
else
> >>(12 dollars shipping). I also got the vacum attachment with it, and they
> >>were 2dollars cheaper that the rest.
> >>
> >>"william kossack" <[email protected]> wrote in message
> >>news:mVJLb.10961$I06.74237@attbi_s01...
> >>
> >>
> >>>My experience is that woodcraft prices on leigh jigs is a bit high. I
> >>>purchased my D4 a couple years ago from the local woodcraft (my first
> >>>big purchase like that).
> >>>
> >>>Go to the leigh webpage http://www.leighjigs.com/
> >>>where they list the places that sell their stuff this will get you
links
> >>>and phone numbers to call to confirm availability and price.
> >>>
> >>>Either Leevalley or highlnad will have the lowest price.
> >>>
> >>>The guyes at highland are very helpful. I purchased an FMT and MMT
from
> >>>them recently.
> >>>The guyes and leeValley are also very helpful. I got an F1 from them
> >>>this summer.
> >>>Finally, everyone at Leigh is extremely helpful. If I need a part I
> >>>call them direct and get it within the week. They will admit that you
> >>>can buy their jigs more cheeply from one of the suppliers but I've
> >>>ordered things like bits dirctly from them on Monday and had them by
the
> >>>weekend instead of driving all the way to woodcraft and waiting for the
> >>>store to get them in stock (half the time I go to woodcraft for
> >>>something like a bit they don't have the size I need)
> >>>
> >>>Master Chef Richard Campbell wrote:
> >>>
> >>>
> >>>
> >>>>Hi all
> >>>>
> >>>>I keep just missing out on Leigh D4 auction on eBay. Where can I buy
> >>>>
> >>>>
> >one?
> >
> >
> >>If
> >>
> >>
> >>>>you have had good expierence with a reseller I would like to know.
> >>>>
> >>>>Chef
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>
> >>
> >
> >
> >
> >
>