Post-It-like adhesive

Maybe a derivative of hide glue, you know, collagen? Tom

Thanks for the speedy reply. Would you know where I should start
looking? Do commerical products exist? Otherwise it wouldn't be good
for us to have to mix the glue ourselves and figure it out if it
actually works or not.

Eli Luong wrote:Would you know where I should start
looking? Do commerical products exist? Otherwise it wouldn't be good
for us to have to mix the glue ourselves and figure it out if it
actually works or not.

You can start looking for hide glue at your local Woodcraft or
woodworking-type store. You've got to test_sometime_ Eli. "It wouldn't
be good" to mix it yourself? Why not? For every success, there's
probably a hundred failures(at least). Tom

This is an undergraduate design team course to design a prototype of a
device, so it's likely a real device put into production would have
consultation from more moedically-focused sources.

Eli Luong wrote:

> Hi,
>
> I'm on a design team, which is an undergraduate course at my
> university.
>

Why is this on the wreck? Especially with "MISMATCH" in the path.
Methinks I smell a troll. Albeit a better one than normal :-).

--
It's turtles, all the way down

In article <[email protected]>,
Eli Luong <[email protected]> wrote:
>Hi,
>
>I'm on a design team, which is an undergraduate course at my
>university. We are currently developing a surgical stapler and require
>an adhesive with certain properties. The adhesive will be bonding
>either titanium or stainless steel staples to whatever standard
>material most medical devices are made of. The adhesive must be
>temporary because the staples will be mounted onto this flap that is
>inside the stapler and the adhesive needs to keep the staples in place.
>After being stapled, however, the staples will fire out and the flaps
>will be retracted, and the adhesive should be able to somewhat easily
>detach the flap from the staples. Biocompatibility and biodegradability
>would be a plus, but we need to find an adhesive first. I'm wondering
>if anyone knows of an adhesive like this.

Rubber cement.

(comment for the regulars here -- get your mind out of the gutter!)

On 6 Mar 2006 21:43:07 -0800, "Eli Luong" <[email protected]> wrote:

>I'm wondering
>if anyone knows of an adhesive like this.

Try 3M

Mark
(sixoneeight) = 618

Eli Luong wrote:
> Hi,
>
> I'm on a design team, which is an undergraduate course at my
> university. We are currently developing a surgical stapler and require
> an adhesive with certain properties. The adhesive will be bonding
> either titanium or stainless steel staples to whatever standard
> material most medical devices are made of. The adhesive must be
> temporary because the staples will be mounted onto this flap that is
> inside the stapler and the adhesive needs to keep the staples in
> place. After being stapled, however, the staples will fire out and
> the flaps will be retracted, and the adhesive should be able to
> somewhat easily detach the flap from the staples. Biocompatibility
> and biodegradability would be a plus, but we need to find an adhesive
> first. I'm wondering if anyone knows of an adhesive like this.
>
> Thank you,
> - Eli Luong

Maybe gum arabic?

--
dadiOH
____________________________

dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

Scotch adhesive putty; strong, nothing left behind, works great.

"Markem" <markem(sixoneeight)@hotmail.com> wrote in message
news:[email protected]...
> On 6 Mar 2006 21:43:07 -0800, "Eli Luong" <[email protected]>
> wrote:
>
>>I'm wondering
>>if anyone knows of an adhesive like this.
>
> Try 3M
>
> Mark
> (sixoneeight) = 618

Personally, I'm hoping it IS a troll. Having our future doctors use
woodworking newsgroups to design surgical procedures doesn't make me
look too kindly towards my dismal future old age!

Jack


Larry Blanchard wrote:
> Eli Luong wrote:
>
>
>>Hi,
>>
>>I'm on a design team, which is an undergraduate course at my
>>university.
>>
>
>
> Why is this on the wreck? Especially with "MISMATCH" in the path.
> Methinks I smell a troll. Albeit a better one than normal :-).
>

On 7-Mar-2006, "mywebaccts (at) PLUGcomcast.net" <"mywebaccts (at) PLUGcomcast.net"> wrote:

> Having our future doctors use
> woodworking newsgroups to design surgical procedures doesn't make me
> look too kindly towards my dismal future old age!

Leonard Lee left Lee Valley to start up a company that makes surgical equipment.
Their first product was an improved scalpel - a surgeon approached Lee Valley
to see if they could get a better scalpel for him; the woodworking carving handle
he experimented with couldn't stand up to the autoclave. They also designed a
jig for holding a hand in place for surgery.

Woodworkers - especially with minds like the Lees - seem to be a good place
to start!

Mike