Soliciting your ideas. I frequently build small boxes out of
materials 1/4" or less. The top is glued on the box then cut apart, so I
can't pin through the side. This prevents me from using most of the
common methods of hinging the top. Any ideas on how to hinge
something that's 1/8" or so thick? I'm thinking leather might work. Which
side out (is it just a matter of preference?)? What glue to use?
Wed, Nov 14, 2007, 12:14pm (EST+5) [email protected] (Smaug=A0Ichorfang)
doth query;
<snip> Any ideas on how to hinge something that's 1/8" or so thick?
<snip>
No prob. Make wooden hinges.
JOAT
The whole of life is a learning process.
- John Keel
On Nov 14, 7:14 am, Smaug Ichorfang <[email protected]> wrote:
> Soliciting your ideas. I frequently build small boxes out of
> materials 1/4" or less. The top is glued on the box then cut apart, so I
> can't pin through the side. This prevents me from using most of the
> common methods of hinging the top. Any ideas on how to hinge
> something that's 1/8" or so thick? I'm thinking leather might work. Which
> side out (is it just a matter of preference?)? What glue to use?
This type of hinge may work but you will need a special blade to cut
the slots.
http://www.rockler.com/product.cfm?Offerings_ID=16927&TabSelect=Details
If I understand the top is just 1/8" thick with no sides on it or very
little sides. You can just use any typical hinge. I suppose I would
use two nice little brass hinges. One leaf would lay on the top of
the top and one leaf would be on the side of the box. You can use
little bolts with nuts and washers inside or use rivets. I think this
would look better than any Davey Crockett version of a leather hinge.
On Nov 14, 4:14 am, Smaug Ichorfang <[email protected]> wrote:
> Soliciting your ideas. I frequently build small boxes out of
> materials 1/4" or less. The top is glued on the box then cut apart, so I
> can't pin through the side. This prevents me from using most of the
> common methods of hinging the top. Any ideas on how to hinge
> something that's 1/8" or so thick? I'm thinking leather might work. Which
> side out (is it just a matter of preference?)? What glue to use?
Smaug Ichorfang wrote:
> Soliciting your ideas. I frequently build small boxes out of
> materials 1/4" or less. The top is glued on the box then cut
> apart, so I can't pin through the side. This prevents me from
> using most of the common methods of hinging the top. Any ideas on
> how to hinge
If the top doesn't fit into a lip on the box you could use small
strips of brass and pin/rivet/glue them on to the box and top sides
either inside or out. Could be morticed or not.
_____________
> something that's 1/8" or so thick? I'm thinking leather might
> work. Which side out (is it just a matter of preference?)? What
> glue to use?
Personal preference. Any glue that would hold it and let it stay
flexible. White glue should work. You could use fabric or any other
flexible material.
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
[email protected] (J T) wrote in news:10141-473B353B-146@storefull-
3333.bay.webtv.net:
> Wed, Nov 14, 2007, 12:14pm (EST+5) [email protected] (Smaug Ichorfang)
> doth query;
> <snip> Any ideas on how to hinge something that's 1/8" or so thick?
> <snip>
>
> No prob. Make wooden hinges.
>
I've thought of that, and tried it. I made a "pirate's chest" a few years
ago and tried making the hinges out of ebony. They looked *awful*! Maybe
I've gotten better now.