I need to buy a new 4 foot carpenter's level (NEVER LEND TOOLS!!! )
Went to HD & Lowes and both the Stanley and Johnson levels have
non-adjustable bubbles. Checked them all, and only found one out of the
seven that read level.
Does anybody still make a level having adjustable bubbles? I got 40 years
out of my last one and would like one of similar quality.
All suggestions welcome.
Ivan Vegvary
why would you want an adjustable level. The only thing I spend more for in
a better level is that it is quality stalility and provides a permanently
flat surface, and it is always level. I am curious b/c you would need a
reference level surface available. I can image that you could use indicated
graduations with a chart or something. Or you may always want the same
slant, or several series of slants. Otherwise the only other way to go is
redout/digital which is otherwise limited with graduations on a std. level.
Again, why would one want an adjustable level?
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
actually I overlooked the fact that you could set the real level setting and
then also set other settings, including all of the graduations, which could
be calibrated to indicate a specific slope, distance from end to end, and
therefore, multiples of that length. I'll take one. But the graduations(s)
would be fixed, no?
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Ivan Vegvary (in OHseh.67$e26.26@trndny04) said:
| I need to buy a new 4 foot carpenter's level (NEVER LEND TOOLS!!! )
| Went to HD & Lowes and both the Stanley and Johnson levels have
| non-adjustable bubbles. Checked them all, and only found one out
| of the seven that read level.
| Does anybody still make a level having adjustable bubbles? I got
| 40 years out of my last one and would like one of similar quality.
|
| All suggestions welcome.
Ivan...
My ancient (Honduras mahogany body!) level grew legs - and after a
long search I bought M-D Building Products' SmartTool with 48" and 24"
bodies, their magnetic bracket, and a padded 48" carrying case. Total
cost was somewhere around $120; but it was a good buy.
This is a digital level that has a self-calibration feature (only
needed when changing batteries or bodies) and displays angles with 0.1
degree accuracy. It has a "hold" button, can be set to beep at
level/plumb, and automatically flips the display for overhead work. My
eyesight isn't what it once was and this level seems made to order.
Any similarity between their name and my initials is purely
coincidental - I have no relationship with the company other than
being a very satisfied customer.
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto
Barry and Greg are right on.
With Stabila levels you don't need and adjustment.
"Ivan Vegvary" <[email protected]> wrote in message
news:OHseh.67$e26.26@trndny04...
>I need to buy a new 4 foot carpenter's level (NEVER LEND TOOLS!!! )
> Went to HD & Lowes and both the Stanley and Johnson levels have
> non-adjustable bubbles. Checked them all, and only found one out of the
> seven that read level.
> Does anybody still make a level having adjustable bubbles? I got 40 years
> out of my last one and would like one of similar quality.
>
> All suggestions welcome.
>
> Ivan Vegvary
>
"bent" <[email protected]> wrote in message
news:[email protected]...
> why would you want an adjustable level. The only thing I spend more for
> in a better level is that it is quality stalility and provides a
> permanently flat surface, and it is always level. I am curious b/c you
> would need a reference level surface available. I can image that you
> could use indicated graduations with a chart or something. Or you may
> always want the same slant, or several series of slants. Otherwise the
> only other way to go is redout/digital which is otherwise limited with
> graduations on a std. level. Again, why would one want an adjustable
> level?
I suppose I want an adjustable because I've been adjusting precision
instruments daily (land surveyor) for the last 40+ years. With a
carpenter's level it is child's play. Place on any surface (doesn't have to
be level), note the reading, flip end for end, AND, if it is truly adjusted,
you should get the same reading.
Ivan Vegvary
You DON'T want "adjustable" vials. You must get a gigh quality level
on which the vials are ALWAYS precise and NOT adjustable. Then you
need to buy Stabila levels and you will never look behind.
www.stabila.com
Greg D.
On Sat, 09 Dec 2006 06:27:58 GMT, "Ivan Vegvary" <[email protected]>
wrote:
>I need to buy a new 4 foot carpenter's level (NEVER LEND TOOLS!!! )
>Went to HD & Lowes and both the Stanley and Johnson levels have
>non-adjustable bubbles. Checked them all, and only found one out of the
>seven that read level.
>Does anybody still make a level having adjustable bubbles? I got 40 years
>out of my last one and would like one of similar quality.
>
>All suggestions welcome.
>
>Ivan Vegvary
>
On Sat, 09 Dec 2006 06:27:58 GMT, "Ivan Vegvary" <[email protected]>
wrote:
>All suggestions welcome.
I have a couple of Stabila levels. I can't remember if they're
adjustable, but I've been very happy with them.