Woodcraft has a set of 20 router bits on sale for $99. I have heard
that it is a bad idea to buy large sets and only buy what you need
but, at $5 a bit, it seems like a good price. (I've heard Woodcraft
bits are good, but I haven't used them).
Since individual bits seem to be about $10-15 a piece (and some of the
bits in the set sell for around $20), is it really unwise to buy sets?
I figure that even if I didn't use all of the bits, I would still
come out ahead... or is this just newbie thinking.
I currently only have 3 bits (3/4" straight, flush trim, and roundover
of some radius), and had been planing to expand my collection as my
projects require something different.
Any opinions?
Thanks in advance,
YJJim
I bought a 20 bit set before coming to New Zealand. All the "blokes" around
here drool on them, because at best these bits (are green if that helps)
would cost around $400 here. I use them everyday in the toyshop and with an
occasional honing, they are still cutting really well.
Cheers
John
--
Rose Cottage Woodworks
www.rosecottageinn.co.nz/woodworks
"Doug Miller" <[email protected]> wrote in message
news:kuiDb.16360$P%[email protected]...
> In article <[email protected]>,
[email protected] (YJJim) wrote:
> >Woodcraft has a set of 20 router bits on sale for $99. I have heard
> >that it is a bad idea to buy large sets and only buy what you need
> >but, at $5 a bit, it seems like a good price. (I've heard Woodcraft
> >bits are good, but I haven't used them).
>
> Chances are that these are *not* Woodcraft's regular line of bits. This
> summer, they advertised ten bits at $5 each, supposedly a "discount" from
> their regular prices on same (ranging from $10 to $20 IIRC). Turns out
that
> they are *not* the same bits -- Woodcraft's regular bits are made in
Taiwan,
> and the five-buck specials are made in Communist China.
>
> --
> Doug Miller (alphageek at milmac dot com)
>
> How come we choose from just two people to run for president and 50 for
Miss America?
In article <[email protected]>, [email protected] (YJJim) wrote:
>Woodcraft has a set of 20 router bits on sale for $99. I have heard
>that it is a bad idea to buy large sets and only buy what you need
>but, at $5 a bit, it seems like a good price. (I've heard Woodcraft
>bits are good, but I haven't used them).
Chances are that these are *not* Woodcraft's regular line of bits. This
summer, they advertised ten bits at $5 each, supposedly a "discount" from
their regular prices on same (ranging from $10 to $20 IIRC). Turns out that
they are *not* the same bits -- Woodcraft's regular bits are made in Taiwan,
and the five-buck specials are made in Communist China.
--
Doug Miller (alphageek at milmac dot com)
How come we choose from just two people to run for president and 50 for Miss America?