On Sat, 02 Dec 2006 19:27:23 -0800, Jim Weisgram
<[email protected]> wrote:
>But I still use Simple Green, and then after I'm done I spray with
>WD-40 to clean my saw blades and router bits.
As did I!
I also used Easy Off, PB Blaster, kerosene, mineral spirits, citrus
solvent, Goo Gone...
Now, I use CMT 2050. <G>
And Highland Hardware is where??
"B A R R Y" <[email protected]> wrote in message
news:[email protected]...
> Highland Hardware now sells CMT 2050 in gallons, @ $33. Such a
> deal!
>
On Sat, 2 Dec 2006 20:48:49 -0600, "Dick Keats" <[email protected]>
wrote:
>And Highland Hardware is where??
highlandhardware.com which will redirect to highlandwoodworking.com
On Sat, 2 Dec 2006 20:48:49 -0600, "Dick Keats" <[email protected]>
wrote:
>And Highland Hardware is where??
>
>"B A R R Y" <[email protected]> wrote in message
>news:[email protected]...
>> Highland Hardware now sells CMT 2050 in gallons, @ $33. Such a
>> deal!
>>
>
It's here: http://www.highlandwoodworking.com/index.asp
And it's here:
1045 North Highland Avenue NE
Atlanta, Georgia 30306
But I still use Simple Green, and then after I'm done I spray with
WD-40 to clean my saw blades and router bits.
On Sun, 03 Dec 2006 14:38:12 GMT, "Leon"
<[email protected]> wrote:
>Yeah, Formula 2050 gives you more woodworking time. Through the years I
>played with the other cleaners also.
2050 works so well, I actually clean my blades and bits. <G>
Spray it on, wipe it off, spray it with Dricote, and put the tool
away.
With all the other stuff I tried, blade and bit cleaning was a
discrete operation that often got skipped.
I wasn't trying to convert anyone, only alert the converted to the
availability of gallons at a serious discount. Now, if I could only
find Topcote and Dricote cheap!
On Sun, 03 Dec 2006 04:53:45 GMT, "New Wave Dave"
<[email protected]> wrote:
>
> Get 5 gallons through Amazon for a little less than $29/gallon !
>WOW!
>
> http://www.amazon.com/exec/obidos/ASIN/B000GTSFO8/nextag-tools-20/ref=nosim
Even better!
I didn't even know it came in gallons, until I got a new HH catalog
today. Sure beats $9-11 for 16 ounces...
"B A R R Y" <[email protected]> wrote in message
news:[email protected]...
> On Sat, 02 Dec 2006 19:27:23 -0800, Jim Weisgram
> <[email protected]> wrote:
>
>>But I still use Simple Green, and then after I'm done I spray with
>>WD-40 to clean my saw blades and router bits.
>
> As did I!
>
> I also used Easy Off, PB Blaster, kerosene, mineral spirits, citrus
> solvent, Goo Gone...
>
> Now, I use CMT 2050. <G>
Yeah, Formula 2050 gives you more woodworking time. Through the years I
played with the other cleaners also.
On Sun, 03 Dec 2006 12:42:43 GMT, B A R R Y <[email protected]>
wrote:
>I also used Easy Off, PB Blaster, kerosene, mineral spirits, citrus
>solvent, Goo Gone...
I forgot to mention Arm and Hammer washing soda, which I also tried.
"Jim Weisgram" <[email protected]> wrote in message
news:[email protected]...
>>"B A R R Y" <[email protected]> wrote in message
>>news:[email protected]...
>>> Highland Hardware now sells CMT 2050 in gallons, @ $33. Such a
>>> deal!
> It's here: http://www.highlandwoodworking.com/index.asp
Get 5 gallons through Amazon for a little less than $29/gallon !
WOW!
http://www.amazon.com/exec/obidos/ASIN/B000GTSFO8/nextag-tools-20/ref=nosim
--
"New Wave" Dave In Houston