On Sunday, October 29, 2017 at 9:44:05 PM UTC-4, Iggy wrote:
> replying to DerbyDad03, Iggy wrote:
> My posts commonly get lost lately. The only way to push them out is to post an
> empty...sometimes 2, as in this case.
>
I'm not sure what you mean by "lost". I (we?) see your full post long before we see your
blank posts. Maybe the problem is not the sending of your posts but a delay in when you
are receiving them.
If one were suspicious, one might say that you are simply increasing the traffic for HOH.
Not me, I'm not suspicious.
Iggy <[email protected]> writes:
>replying to DerbyDad03, Iggy wrote:
>My posts commonly get lost lately. The only way to push them out is to post an
>empty...sometimes 2, as in this case.
No, that's not the only way. First, you must stop using those
freeloaders at home moaners hub, and get a real usenet feed
(or even use Google Groups instead of that crappy homemoaners hub).
On Sat, 28 Oct 2017 16:19:36 -0700, Electric Comet
<[email protected]> wrote:
>
>previous i never bothered with gloves but they are cheap now
>
>but i got a box of vinyl gloves and they are not that good
>they trap moisture and actually become wet inside
>
>loooking for cheap and good for maybe an hour or so of use then tossed
They're all going to be hot and sweaty but I find Nitrile to be the
best for finishing, all around. HF has 'em cheap.
On Saturday, October 28, 2017 at 8:58:35 PM UTC-4, Martin Eastburn wrote:
> For semi-serious chemical / I use 7-mil Nitrile not the standard
> 3-5 mil.
> Martin
>
> On 10/28/2017 6:55 PM, [email protected] wrote:
> > On Sat, 28 Oct 2017 16:19:36 -0700, Electric Comet
> > <[email protected]> wrote:
> >
> >>
> >> previous i never bothered with gloves but they are cheap now
> >>
> >> but i got a box of vinyl gloves and they are not that good
> >> they trap moisture and actually become wet inside
> >>
> >> loooking for cheap and good for maybe an hour or so of use then tossed
> >
> > They're all going to be hot and sweaty but I find Nitrile to be the
> > best for finishing, all around. HF has 'em cheap.
> >
HF has Nitrile in 3, 5, 7 & 9 mm
The link is for the 5's, with links to others on the right hand side.
https://www.harborfreight.com/5-mil-Nitrile-Powder-Free-Gloves-100-Pc-Large-68497.html
I use the 5's for lots of stuff, especially car repairs.
I wear either the 5's in vinyl or nitrile (which ever is nearby) under my work
gloves when raking leaves on cold, wet, fall days and under my snow gloves
when shoveling/blowing snow. My hands stay warm even when wet. Keeping the wind
off in the winter means that you can take care of "delicate" tasks (gassing up,
changing a shear pin, etc.). Things that can't be done with bulky snow gloves.
On 10/28/2017 7:19 PM, Electric Comet wrote:
>
> previous i never bothered with gloves but they are cheap now
>
> but i got a box of vinyl gloves and they are not that good
> they trap moisture and actually become wet inside
>
> loooking for cheap and good for maybe an hour or so of use then tossed
>
I don't know what 'cheap' means to you but these have worked out well for me:
https://www.amazon.com/gp/product/B002XXIZOU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
They are tough and long-lasting but, like any impervious barrier, will
leave your hands sweating. These are tough enough that I can re-use them a
couple of times on a project -- I just hang them up to dry between uses.
Oh, and I always keep a couple of pairs in the car just in case I have a
breakdown or a flat tire and need to keep my hands clean.
replying to Electric Comet, Iggy wrote:
Actually, I prefer the ability to pop gloves off and on as needed...loose-fit
reusable. Polyethylene Gloves are so much better than the skin-tight
annoyances...powder-free, come in elbow lengths (just fold-over and secure
with a tab of tape), much easier, cheaper and therefore actually comfortable.
_Standard Cuff -_
https://www.amazon.com/dp/B00I46QZ24/ref=dp_sp_detail?psc=1&pd_rd_i=B00I46QZ24&pd_rd_wg=18CAl&pd_rd_r=1HFABAZDTCMST6YHC50T&pd_rd_w=apxb8
AND _Elbow Cuff -_ https://www.amazon.com/dp/B00CWJP1ME/ref=dp_sp_detail?psc=1
--
for full context, visit https://www.homeownershub.com/woodworking/best-disposable-gloves-for-finishing-811657-.htm
For semi-serious chemical / I use 7-mil Nitrile not the standard
3-5 mil.
Martin
On 10/28/2017 6:55 PM, [email protected] wrote:
> On Sat, 28 Oct 2017 16:19:36 -0700, Electric Comet
> <[email protected]> wrote:
>
>>
>> previous i never bothered with gloves but they are cheap now
>>
>> but i got a box of vinyl gloves and they are not that good
>> they trap moisture and actually become wet inside
>>
>> loooking for cheap and good for maybe an hour or so of use then tossed
>
> They're all going to be hot and sweaty but I find Nitrile to be the
> best for finishing, all around. HF has 'em cheap.
>