On 3/25/2014 10:16 AM, dpb wrote:
> On 3/25/2014 8:59 AM, Greg Guarino wrote:
>> On 3/24/2014 6:01 PM, woodchucker wrote:
>>> http://philadelphia.craigslist.org/tls/4390244955.html
>>>
>>>
>> Leaving aside this fellow's spelling quirks, what do you suppose "duel
>> 14" blades" means? Perhaps just that it comes with a second blade?
> ...
>
> Nope, they're dual-arbor...
>
> <http://vintagemachinery.org/photoindex/detail.aspx?id=1580>
>
> --
>
That's cool, I guess you could mount a rip and crosscut blade and switch
quickly.
--
Jeff
On 3/24/2014 6:19 PM, Sonny wrote:
> On Monday, March 24, 2014 5:01:23 PM UTC-5, woodchucker wrote:
>> http://philadelphia.craigslist.org/tls/4390244955.html -- Jeff
>
> That saw price might be a typo, but you never know. The same
> Allentown listing says $500, also.
Seems like a giveaway to me, too...of course, most recreational wwr's
won't have the room or the need so demand likely isn't terribly high.
But, in a major metro area one would think there wouldn't be trouble
getting more than that if one had any patience at all...
--
On 3/24/2014 6:01 PM, woodchucker wrote:
> http://philadelphia.craigslist.org/tls/4390244955.html
>
>
Leaving aside this fellow's spelling quirks, what do you suppose "duel
14" blades" means? Perhaps just that it comes with a second blade?
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
On 3/25/2014 8:59 AM, Greg Guarino wrote:
> On 3/24/2014 6:01 PM, woodchucker wrote:
>> http://philadelphia.craigslist.org/tls/4390244955.html
>>
>>
> Leaving aside this fellow's spelling quirks, what do you suppose "duel
> 14" blades" means? Perhaps just that it comes with a second blade?
...
Nope, they're dual-arbor...
<http://vintagemachinery.org/photoindex/detail.aspx?id=1580>
--
Greg Guarino wrote:
> On 3/24/2014 6:01 PM, woodchucker wrote:
>> http://philadelphia.craigslist.org/tls/4390244955.html
>>
>>
> Leaving aside this fellow's spelling quirks, what do you suppose "duel
> 14" blades" means? Perhaps just that it comes with a second blade?
Maybe he means you can cut on either side of the blade with a miter
guage (I see 2 miter guage slots).
There are other spelling errors too, so I wouldn't read into it too
deeply. Why don't you ask him?
Bill
>
> ---
> This email is free from viruses and malware because avast! Antivirus
> protection is active.
> http://www.avast.com
>
On 3/25/2014 9:24 AM, Bill wrote:
...
> Maybe he means you can cut on either side of the blade with a miter
> guage (I see 2 miter guage slots).
...
No, he means it is dual arbor -- see link in other followup.
See the big round casting? The two arbors rotate in there to allow
setup for production work between two blade setups just by rotating
arbor position instead of changing blade. Dado on the other was typical
setup.
--
On 3/25/2014 9:41 AM, dpb wrote:
> On 3/25/2014 9:24 AM, Bill wrote:
> ...
>
>> Maybe he means you can cut on either side of the blade with a miter
>> guage (I see 2 miter guage slots).
> ...
>
> No, he means it is dual arbor -- see link in other followup.
>
> See the big round casting? The two arbors rotate in there to allow setup
> for production work between two blade setups just by rotating arbor
> position instead of changing blade. Dado on the other was typical setup.
Here's a Fagan, not Oliver, patent but same idea. Quick search didn't
really find a good picture of an Oliver itself that clearly shows the
dual arbor arrangement...there was a 260 in the ww shop down at Navy
shipyard in Norfolk where my cousin was stationed way, way, back...
<http://www.datamp.org/patents/displayPatent.php?id=30352>
--
On 3/25/2014 10:48 AM, dpb wrote:
> On 3/25/2014 9:41 AM, dpb wrote:
>> On 3/25/2014 9:24 AM, Bill wrote:
>> ...
>>
>>> Maybe he means you can cut on either side of the blade with a miter
>>> guage (I see 2 miter guage slots).
>> ...
>>
>> No, he means it is dual arbor -- see link in other followup.
>>
>> See the big round casting? The two arbors rotate in there to allow setup
>> for production work between two blade setups just by rotating arbor
>> position instead of changing blade. Dado on the other was typical setup.
>
> Here's a Fagan, not Oliver, patent but same idea. Quick search didn't
> really find a good picture of an Oliver itself that clearly shows the
> dual arbor arrangement...there was a 260 in the ww shop down at Navy
> shipyard in Norfolk where my cousin was stationed way, way, back...
>
> <http://www.datamp.org/patents/displayPatent.php?id=30352>
Thanks. I had never heard of such a thing.
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
In article <[email protected]>
Greg Guarino <[email protected]> writes:
>On 3/24/2014 6:01 PM, woodchucker wrote:
>> http://philadelphia.craigslist.org/tls/4390244955.html
>>
>>
>Leaving aside this fellow's spelling quirks, what do you suppose "duel
>14" blades" means? Perhaps just that it comes with a second blade?
According to http://vintagemachinery.org/photoindex/detail.aspx?id=1580
An old Oliver Model 90 bench saw. It is a dual arbor saw that,
according to Oliver literature, was designed to be a smaller
version of the model 60 dual arbor saw. Overall it is very similar,
2 14" saw blades carryed on a rotating yoke, sliding table, flat
belt drive. The model 60 carried 2 16" blades. As with the Model
60, a single larger blade can be used, in this case 18".
--
Drew Lawson | What is an "Oprah"?
| -- Teal'c
|
On 3/25/2014 9:59 AM, Greg Guarino wrote:
> On 3/25/2014 10:48 AM, dpb wrote:
>> On 3/25/2014 9:41 AM, dpb wrote:
...
>>> See the big round casting? The two arbors rotate in there to allow setup
>>> for production work between two blade setups just by rotating arbor
>>> position instead of changing blade. Dado on the other was typical setup.
>>
>> Here's a Fagan, not Oliver, patent but same idea. Quick search didn't
>> really find a good picture of an Oliver itself that clearly shows the
>> dual arbor arrangement...there was a 260 in the ww shop down at Navy
>> shipyard in Norfolk where my cousin was stationed way, way, back...
>>
>> <http://www.datamp.org/patents/displayPatent.php?id=30352>
>
> Thanks. I had never heard of such a thing.
...
Yeah, these are _serious_ iron for production shops; not just overgrown
Unisaurs...
--
On 3/25/2014 10:38 AM, woodchucker wrote:
> On 3/25/2014 10:16 AM, dpb wrote:
>> On 3/25/2014 8:59 AM, Greg Guarino wrote:
>>> On 3/24/2014 6:01 PM, woodchucker wrote:
...
>>> Leaving aside this fellow's spelling quirks, what do you suppose "duel
>>> 14" blades" means? Perhaps just that it comes with a second blade?
>> ...
>>
>> Nope, they're dual-arbor...
...
> That's cool, I guess you could mount a rip and crosscut blade and switch
> quickly.
Yeah, if I were within a day's drive of Philly I'd already be on me way...
As noted, these are serious machines...the shop where I've seen one in
operation was at Norfolk Navy shops almost 40 yr ago. They had it set
up w/ standard combination on one and a dado set for jointing on the other.
--