I went to the site posted by David Merril below. [ TKX David ] I read the pdf manual.
It looked fair enough for the price of $29.99 plus the S&H even though it does not do
through dovetails. I do not want to mount the machine on my new workbench. I wish to
mount it somehow onto a jig so I can clamp the jig into one of my WB vises or clamp
the jig to the top of my WB. I was thinking of mounting the machine to a longish
board or a suitable size 3/4 ply panel and clamp that board or panel to my WB. I will
appreciate any mounting suggestions from others.
Hoyt W.
"Earl Creel" <[email protected]> wrote in message
news:wuPrc.39705$5a.2887@okepread03...
>
> "Hoyt Weathers" <[email protected]> wrote in message
> news:[email protected]...
> (SNIP)
> > It looked fair enough for the price of $29.99 plus the S&H even though
it
> does not do
> > through dovetails. (SNIP)
>
> I cut through dovetails with mine. You have to make your own template(s)
> but that is not too difficult. Would post some pictures if anyone is
> interested.
> Earl Creel
yes, I just bought this machine and would certainly be interested.
Darrell
>
>
Earl Creel wrote:
> "Hoyt Weathers" <[email protected]> wrote in message
> news:[email protected]...
> (SNIP)
> > It looked fair enough for the price of $29.99 plus the S&H even though it
> does not do
> > through dovetails. (SNIP)
>
> I cut through dovetails with mine. You have to make your own template(s)
> but that is not too difficult. Would post some pictures if anyone is
> interested.
> Earl Creel
Earl, I would love to see some pictures of the through dovetail template. Even a
rough hand-drawn measured drawing will help me out. You can zap me one at the above
address. It is correct.
Hoyt W.
"Hoyt Weathers" <[email protected]> wrote in message
news:[email protected]...
(SNIP)
> It looked fair enough for the price of $29.99 plus the S&H even though it
does not do
> through dovetails. (SNIP)
I cut through dovetails with mine. You have to make your own template(s)
but that is not too difficult. Would post some pictures if anyone is
interested.
Earl Creel