8" is pretty long. KBC tools has some. longest will probably be 4". You
might get a HSS cutoff blade 1/4 X 1 X 6. Ford tool steel will have A2 & M2
and other varieties unhardened cut to your length. Then you will have to
hardened & grind them.
Wendell
"blabla" <[email protected]> wrote in message
news:CBXQb.274069$ts4.250087@pd7tw3no...
> Looking for HSS blanks preferably hardend already.
>
> Thanx Mat
>
>
Oops - square and rectangular stock 1/4" x 1/2" and 1/2" x 1/2", 8" or more
"Bridger" <[email protected]> wrote in message
news:[email protected]...
> On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" <[email protected]> wrote:
>
> >Looking for HSS blanks preferably hardend already.
> >
> >Thanx Mat
> >
>
>
> blank whats?
Probably blanks for some type of moulding head, but more details would be
helpful.
"Bridger" <[email protected]> wrote in message
news:[email protected]...
> On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" <[email protected]> wrote:
>
> >Looking for HSS blanks preferably hardend already.
> >
> >Thanx Mat
> >
>
>
> blank whats?
On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" <[email protected]> wrote:
>Looking for HSS blanks preferably hardend already.
>
>Thanx Mat
>
blank whats?
On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" <[email protected]> wrote:
>Looking for HSS blanks preferably hardend already.
Power hacksaw blades. My last ones were a couple of feet long and
only £3 each.
Hardened HSS is near unworkable though, and you can't anneal it.
1/2" square x 8" long HSS tooling blank at MSC:
http://www.mscdirect.com/IWCatSectionView.process?Keyword=Y&RestartFlow=t&Me
rchant_Id=1&p_section_Id=747&Section_Id=747&p_product_type_Id=417&ShowProduc
tList=t&p_att_type_id_0=27315&p_att_value_id_0=21720&p_search_flag_0=1&p_att
_type_id_1=21901&p_att_value_id_1=339267&p_search_flag_1=1&p_att_type_id_2=2
7314&p_att_value_id_2=294062&p_search_flag_2=1&SelectedAtt.length=3&pbegin=0
&pcount=15&NameVector%5B0%5D.Name=Square+Size&NameVector%5B0%5D.Value=.5000&
NameVector%5B1%5D.Name=Material&NameVector%5B1%5D.Value=HSS&NameVector%5B2%5
D.Name=Overall+Length&NameVector%5B2%5D.Value=8.0000&NameVector.length=3&Vie
w.x.x=87&View.x.y=10
Ian
"blabla" <[email protected]> wrote in message
news:QQYQb.264963$JQ1.32678@pd7tw1no...
> Oops - square and rectangular stock 1/4" x 1/2" and 1/2" x 1/2", 8" or
more
> "Bridger" <[email protected]> wrote in message
> news:[email protected]...
> > On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" <[email protected]> wrote:
> >
> > >Looking for HSS blanks preferably hardend already.
> > >
> > >Thanx Mat
> > >
> >
> >
> > blank whats?
>
>