30.00 Off planes of all sorts.
Knight Toolworks in conjunction with Harrolson at www.japanesetools.com have had
these custom made Japanese irons made for western planes. These are the first
and only hand forged/laminated Japanese irons that will fit a regular wedged
plane.
They are 2" wide and 5.25" long and are a bit over ¼" thick. They will drop into
any knight Toolworks plane that uses a 2" iron with just a little mouth and
wedge adjustment.
They are made from blue steel (holds and edge longer then pretty much any tool
steel on the market) and wrought iron. I believe these to be the best irons out
there over O-1 and A-2 irons. They will hold an edge longer then A-2 they will
get sharper they will leave a deeper/cleaner surface and they make the plane
easier to use. They will really help with tearout too.
They are hand stamped with Shizu Tani (tranquil valley) Shipping is 5.00
including insurance.
http://www.knight-toolworks.com/web_temp_pics/jironcoffin.jpg
http://www.knight-toolworks.com/graphics/japaneseupgradeirons.jpg
All planes now have finger grips and brass set screws to adjust the fit of the
iron.
Rock maple
Purpleheart
Cocobolo at an extra cost is also available.
Padouk
Please check my page for all my planes www.knight-toolworks.com
I also have razee jointers and jack planes and scrubs.
http://www.knight-toolworks.com/wooden.htm
I have great looking/feeling coffin smoothers
http://www.knight-toolworks.com/graphics/coffin.jpg
All planes now have setscrews to center the irons in the body and make adjusting
the iron easy.
All planes are sanded/planed and finished with a special oil and wax finish.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
Steve,
What's the upgrade cost for the Cocobolo? I still need a Jack plane and a
Jointer. I'll get both in Razee style (when I've got enough money that is
;)
Mike
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
> 30.00 Off planes of all sorts.
>
> Knight Toolworks in conjunction with Harrolson at www.japanesetools.com
have had
> these custom made Japanese irons made for western planes. These are the
first
> and only hand forged/laminated Japanese irons that will fit a regular
wedged
> plane.
> They are 2" wide and 5.25" long and are a bit over ¼" thick. They will
drop into
> any knight Toolworks plane that uses a 2" iron with just a little mouth
and
> wedge adjustment.
> They are made from blue steel (holds and edge longer then pretty much any
tool
> steel on the market) and wrought iron. I believe these to be the best
irons out
> there over O-1 and A-2 irons. They will hold an edge longer then A-2 they
will
> get sharper they will leave a deeper/cleaner surface and they make the
plane
> easier to use. They will really help with tearout too.
> They are hand stamped with Shizu Tani (tranquil valley) Shipping is 5.00
> including insurance.
> http://www.knight-toolworks.com/web_temp_pics/jironcoffin.jpg
> http://www.knight-toolworks.com/graphics/japaneseupgradeirons.jpg
>
>
> All planes now have finger grips and brass set screws to adjust the fit of
the
> iron.
> Rock maple
> Purpleheart
> Cocobolo at an extra cost is also available.
> Padouk
> Please check my page for all my planes www.knight-toolworks.com
>
>
> I also have razee jointers and jack planes and scrubs.
> http://www.knight-toolworks.com/wooden.htm
> I have great looking/feeling coffin smoothers
> http://www.knight-toolworks.com/graphics/coffin.jpg
> All planes now have setscrews to center the irons in the body and make
adjusting
> the iron easy.
>
> All planes are sanded/planed and finished with a special oil and wax
finish.
>
>
> --
> Knight-Toolworks & Custom Planes
> Custom made wooden planes at reasonable prices
> See http://www.knight-toolworks.com For prices and ordering instructions.
I don't think the plane is included.
--
---------------------------------------------------------------------
"Are you still wasting your time with spam?...
There is a solution!"
Protected by GIANT Company's Spam Inspector
The most powerful anti-spam software available.
http://www.giantcompany.com
"Mike in Idaho" <[email protected]> wrote in message
news:[email protected]...
> Steve,
>
> What's the upgrade cost for the Cocobolo? I still need a Jack plane and a
> Jointer. I'll get both in Razee style (when I've got enough money that is
> ;)
>
> Mike
>
> "Steve Knight" <[email protected]> wrote in message
> news:[email protected]...
> > 30.00 Off planes of all sorts.
> >
> > Knight Toolworks in conjunction with Harrolson at www.japanesetools.com
> have had
> > these custom made Japanese irons made for western planes. These are the
> first
> > and only hand forged/laminated Japanese irons that will fit a regular
> wedged
> > plane.
> > They are 2" wide and 5.25" long and are a bit over ¼" thick. They will
> drop into
> > any knight Toolworks plane that uses a 2" iron with just a little mouth
> and
> > wedge adjustment.
> > They are made from blue steel (holds and edge longer then pretty much
any
> tool
> > steel on the market) and wrought iron. I believe these to be the best
> irons out
> > there over O-1 and A-2 irons. They will hold an edge longer then A-2
they
> will
> > get sharper they will leave a deeper/cleaner surface and they make the
> plane
> > easier to use. They will really help with tearout too.
> > They are hand stamped with Shizu Tani (tranquil valley) Shipping is
5.00
> > including insurance.
> > http://www.knight-toolworks.com/web_temp_pics/jironcoffin.jpg
> > http://www.knight-toolworks.com/graphics/japaneseupgradeirons.jpg
> >
> >
> > All planes now have finger grips and brass set screws to adjust the fit
of
> the
> > iron.
> > Rock maple
> > Purpleheart
> > Cocobolo at an extra cost is also available.
> > Padouk
> > Please check my page for all my planes www.knight-toolworks.com
> >
> >
> > I also have razee jointers and jack planes and scrubs.
> > http://www.knight-toolworks.com/wooden.htm
> > I have great looking/feeling coffin smoothers
> > http://www.knight-toolworks.com/graphics/coffin.jpg
> > All planes now have setscrews to center the irons in the body and make
> adjusting
> > the iron easy.
> >
> > All planes are sanded/planed and finished with a special oil and wax
> finish.
> >
> >
> > --
> > Knight-Toolworks & Custom Planes
> > Custom made wooden planes at reasonable prices
> > See http://www.knight-toolworks.com For prices and ordering
instructions.
>
>
On Mon, 02 Feb 2004 19:02:21 GMT, "Mike in Idaho" <[email protected]> wrote:
>Steve,
>
>What's the upgrade cost for the Cocobolo? I still need a Jack plane and a
>Jointer. I'll get both in Razee style (when I've got enough money that is
>;)
>
about 70.00 if i can find dry cocobolo. that's the fun part.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.