I'm getting ready to build some barrister's bookshelves. I would like to
have the final color very dark, possibly with a dark red tint. I usually
work in red oak but would never be able to get the color dark using oak.
I'm looking for advice as to the wood that takes dark stain best -
walnut? maple? cherry?
Your advice would be appreciated.
John
Stoutman wrote:
> "John848" <[email protected]> wrote in message
> news:[email protected]...
>> I'm getting ready to build some barrister's bookshelves. I would like to
>> have the final color very dark, possibly with a dark red tint. I usually
>> work in red oak but would never be able to get the color dark using oak.
>> I'm looking for advice as to the wood that takes dark stain best - walnut?
>> maple? cherry?
>>
>> Your advice would be appreciated.
>>
>> John
>
> Use a dye. The one I use most often is made by Transtint. It comes in a
> variety of colors and must be diluted with either water or isopropyl alcohol
> (my choice) before use. The more dilute the lighter the color. You can go
> as dark as you want!
>
> http://www.woodcraft.com/family.aspx?FamilyID=1718
>
> Woodcraft sells it. You won't find it at Home Depot or Lowes.
>
Thanks to all for the advice - I'm going to order some right now and see
how it works.
Thanks again.
John
John848 wrote:
> I'm getting ready to build some barrister's bookshelves. I would like to
> have the final color very dark, possibly with a dark red tint. I usually
> work in red oak but would never be able to get the color dark using oak.
> I'm looking for advice as to the wood that takes dark stain best -
> walnut? maple? cherry?
>
> Your advice would be appreciated.
>
> John
I just finished a set of built-in bookshelves and also wanted to get a
dark finish (mission style in my case) with the red oak I was using. I
used a formula I found in one of the mags, but tweaked it a bit. It
called for 4 parts Miniwax red oak stain to one part non-fibered
roofing tar. That was a little too red for what I wanted, so after
experimenting a bit I did 3-to-1 golden oak/red oak, then took that and
mixed it 4 to 1 with the roofing tar. It was supposed to mimic ammonia
fuming with white oak, which I think it did pretty well without me
keeling over in the garage from ammonia poisoning.
John848 wrote:
> I'm getting ready to build some barrister's bookshelves. I would
like to
> have the final color very dark, possibly with a dark red tint. I
usually
> work in red oak but would never be able to get the color dark using
oak.
> I'm looking for advice as to the wood that takes dark stain best -
> walnut? maple? cherry?
Have you considered white oak with a BLO and bees wax finish?
Lew
"John848" <[email protected]> wrote in message
news:[email protected]...
> I'm getting ready to build some barrister's bookshelves. I would like to
> have the final color very dark, possibly with a dark red tint. I usually
> work in red oak but would never be able to get the color dark using oak.
> I'm looking for advice as to the wood that takes dark stain best - walnut?
> maple? cherry?
>
> Your advice would be appreciated.
>
> John
Use a dye. The one I use most often is made by Transtint. It comes in a
variety of colors and must be diluted with either water or isopropyl alcohol
(my choice) before use. The more dilute the lighter the color. You can go
as dark as you want!
http://www.woodcraft.com/family.aspx?FamilyID=1718
Woodcraft sells it. You won't find it at Home Depot or Lowes.
--
Stoutman
www.garagewoodworks.com
Oak can be stained quite dark. Cherry is also very stainable but you can
hide the natural beauty of Cherry by going too dark. If dark is important
use Walnut - It is usually a natural dark wood and many finishes will
accentuate the grain without stain (pick your wood carefully because Walnut
can also be rather light).
You will not get there with Maple. It is a hard wood and doesn't take stain
all that well.
RonB
"John848" <[email protected]> wrote in message
news:[email protected]...
> I'm getting ready to build some barrister's bookshelves. I would like to
> have the final color very dark, possibly with a dark red tint. I usually
> work in red oak but would never be able to get the color dark using oak.
> I'm looking for advice as to the wood that takes dark stain best - walnut?
> maple? cherry?
>
> Your advice would be appreciated.
>
> John
"John848" <[email protected]> wrote in message
news:[email protected]...
> I'm getting ready to build some barrister's bookshelves. I would like to
> have the final color very dark, possibly with a dark red tint. I usually
> work in red oak but would never be able to get the color dark using oak.
> I'm looking for advice as to the wood that takes dark stain best - walnut?
> maple? cherry?
>
> Your advice would be appreciated.
>
Consider dying it, and then staining it. Oak takes dye just fine.
I like to use both.
Visit www.homesteadfinishing.com for a color chart of the dyes Jeff
Jewitt developed.
On Sun, 17 Dec 2006 22:33:15 -0500, "Stoutman" <.@.> wrote:
>
>
>"John848" <[email protected]> wrote in message
>news:[email protected]...
>> I'm getting ready to build some barrister's bookshelves. I would like to
>> have the final color very dark, possibly with a dark red tint. I usually
>> work in red oak but would never be able to get the color dark using oak.
>> I'm looking for advice as to the wood that takes dark stain best - walnut?
>> maple? cherry?
>>
>> Your advice would be appreciated.
>>
>> John
>
>Use a dye. The one I use most often is made by Transtint. It comes in a
>variety of colors and must be diluted with either water or isopropyl alcohol
>(my choice) before use. The more dilute the lighter the color. You can go
>as dark as you want!
>
>http://www.woodcraft.com/family.aspx?FamilyID=1718
>
>Woodcraft sells it. You won't find it at Home Depot or Lowes.