"Lew Hodgett" <[email protected]> wrote in news:513fefbd$0$21104
[email protected]:
>
> "JayPique" wrote:
>
>
>> Seriously. Who's up next for "how do i fill a hole"?
>> JP
>> <grumble>
> --------------------------------
> Depends on the hole.
>
> Lew
>
I like to fill mine with a special filler: 78% Element 3, 21% Element 8,
and 1% other. It works great for all holes, and when you don't need it
any more you can easily remove it to fill the hole with something else.
Puckdropper
--
Make it to fit, don't make it fit.
"JayPique" wrote:
Seriously. Who's up next for "how do i fill a hole"?
JP
<grumble>
--------------------------------
Lew Hodgett wrote:
Depends on the hole.
Lew
----------------------------------
"Larry W" wrote:
Surely he can't go wrong with epoxy and micro-baloons, right Lew?
-------------------------------------
Don't think I'd go quite that far<G>.
Lew
"JayPique" wrote in message
news:[email protected]...
>> You all must be sick, or dying.
>Seriously. Who's up next for "how do i fill a hole"?
Are you suggesting that the holes be filled with the sick, dying or dead?
"woodchucker" wrote in message
news:[email protected]...
I posted the HF geared ratchet clamp like the Bessey KliKlamp on the
binaries and not one of you commented. good ,bad or rant.
You all must be sick, or dying.
--
Jeff
Checked again and the photo came through. WW
On 3/13/2013 9:30 AM, HeyBub wrote:
> woodchucker wrote:
>> I posted the HF geared ratchet clamp like the Bessey KliKlamp on the
>> binaries and not one of you commented. good ,bad or rant.
>>
>> You all must be sick, or dying.
>
> I couldn't find a "geared ratchet clamp" on the HF site. Perhaps if you
> provided an item number...?
>
>
it is item # 60434 like spalted walt said..
it's not on the site.. and that makes it impossible to track for sales.
--
Jeff
On 3/12/2013 9:59 PM, Spalted Walt wrote:
> On Tue, 12 Mar 2013 20:16:00 -0400, woodchucker <[email protected]> wrote:
>
>> I posted the HF geared ratchet clamp like the Bessey KliKlamp on the
>> binaries and not one of you commented. good ,bad or rant.
>
> Nice! I was unaware HF sold KliKlamp type clamps. According to the pic you
> posted it looks like they are item number 60434 but that's not found on their
> web site. Are they a new item and not yet on HF's web site or were they bought
> years ago and have since been discontinued?
>
>
> SORRY, NO ITEMS FOUND FOR ''60434''
> http://www.harborfreight.com/catalogsearch/result/?q=60434
>
yep that the number. And I saw them about 3 or 4 months ago and did not
find them on the web site.
Went in this past Sunday and expected to pay $19.99
plus 20% off coupon, but it was on sale plus the 20% and it wound up
8.38...
so I sent the wife in... Going to get more. I ground off the nubs on the
pad. These are great clamps for that price, or even more.
--
Jeff
"woodchucker" wrote in message
news:[email protected]...
I posted the HF geared ratchet clamp like the Bessey KliKlamp on the
binaries and not one of you commented. good ,bad or rant.
You all must be sick, or dying.
--
Jeff
It would help if the picture showed up. WW
woodchucker wrote:
> I posted the HF geared ratchet clamp like the Bessey KliKlamp on the
> binaries and not one of you commented. good ,bad or rant.
>
> You all must be sick, or dying.
I never saw it.
--
-Mike-
[email protected]
"G. Ross" <[email protected]> wrote in message
news:[email protected]...
> woodchucker wrote:
>> I posted the HF geared ratchet clamp like the Bessey KliKlamp on the
>> binaries and not one of you commented. good ,bad or rant.
>>
>> You all must be sick, or dying.
>>
>>
> HF is an hour's drive away from me, and besides--I'm all clamped out. Now
> if they still had the better turning set like they used to, I would get
> another one. They make good starting points for design your own scrapers.
>
> --
> GW Ross
>
> They told me I was gullible ... and I
> believed them!
>
GW, both of our HF here in the Chicago burbs have the old set (dark purple
handles) I have a couple sets that I've turned into many custom scrapers!
Dan
In article <[email protected]>,
Lew Hodgett <[email protected]> wrote:
>
>"JayPique" wrote:
>
>
>> Seriously. Who's up next for "how do i fill a hole"?
>> JP
>> <grumble>
>--------------------------------
>Depends on the hole.
>
>Lew
>
>
Surely he can't go wrong with epoxy and micro-baloons, right Lew? :)
--
There are no stupid questions, but there are lots of stupid answers.
Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf. lonestar. org
On Tue, 12 Mar 2013 20:16:00 -0400, woodchucker <[email protected]> wrote:
>I posted the HF geared ratchet clamp like the Bessey KliKlamp on the
>binaries and not one of you commented. good ,bad or rant.
Nice! I was unaware HF sold KliKlamp type clamps. According to the pic you
posted it looks like they are item number 60434 but that's not found on their
web site. Are they a new item and not yet on HF's web site or were they bought
years ago and have since been discontinued?
SORRY, NO ITEMS FOUND FOR ''60434''
http://www.harborfreight.com/catalogsearch/result/?q=60434
On Wed, 13 Mar 2013 18:13:24 -0400, woodchucker <[email protected]> wrote:
>yep that the number. And I saw them about 3 or 4 months ago and did not
>find them on the web site.
>Went in this past Sunday and expected to pay $19.99
>plus 20% off coupon, but it was on sale plus the 20% and it wound up
>8.38...
>so I sent the wife in... Going to get more. I ground off the nubs on the
>pad. These are great clamps for that price, or even more.
Called 3 different HF in my area, 1 store had 2 in stock, the rest were out and
didn't expect to get any in - since the 60434 clamp is a "clearance item". I
grabbed the remaining 2 although 1 was missing the rubber pad. I'll epoxy a pad
that I bought a couple of years ago:
http://www.harborfreight.com/9-pairs-c-clamp-jaw-pads-91952.html
Every bit as strong as the Bessey, if not stronger...
http://holzwerkerblog.de/wp-content/uploads/2013/01/bessey_kliklamp.jpg
woodchucker wrote:
> I posted the HF geared ratchet clamp like the Bessey KliKlamp on the
> binaries and not one of you commented. good ,bad or rant.
>
> You all must be sick, or dying.
>
>
HF is an hour's drive away from me, and besides--I'm all clamped out.
Now if they still had the better turning set like they used to, I
would get another one. They make good starting points for design your
own scrapers.
--
GW Ross
They told me I was gullible ... and I
believed them!