I asked probably 30 different people at the IWF if they'd seen a
headset that can kill noise, yet allow normal conversation to be
heard, as well as provide for a high level of automation using voice
recognition technology. No one seems to have it.
Any of you grease monkeys out there know if the automotive folks are
using something like this? It's gotta exist out there....
JP
*************************
I'm just not that smart.
In article <[email protected]>,
LRod <[email protected]> wrote:
>On Fri, 03 Sep 2004 23:04:49 -0400, Jay Pique <[email protected]>
>wrote:
>
>>Any of you grease monkeys out there know if the automotive folks are
>>using something like this?
>
>I don't care for that term. I don't know a monkey that can rebuild a
>carburetor.
If, given enough time, they can write the complete works of Shakespeare,
a mere carburetor should _not_ be much of a challenge.
Old Fangled <[email protected]> wrote:
>Jay Pique <[email protected]> wrote in
>news:[email protected]:
>
>> I asked probably 30 different people at the IWF if they'd seen a
>> headset that can kill noise, yet allow normal conversation to be
>> heard, as well as provide for a high level of automation using voice
>> recognition technology. No one seems to have it.
>
>I'm not sure that I understand what you are asking for. There are lots of
>noise cancelling headsets available, and many of them have microphones in
>order to allow people to communicate. Here's an example:
>
>www.websoft-solutions.net/ProductDetails.asp?ProductCode=Pel-MT7H7-Ser
>
>However, where does voice recognition software come into this? It's not as
>if the headsets need to recognize any voice commands.
Thanks much for the link above - it's the closest thing I've seen to
what I'm envisioning. There was an older thread called The Ultimate
Earmuffs a while back - http://tinyurl.com/3sjsm - that got into more
detail about functionality.
Basically I'd like the headset shown in your link, that has the
ability to tie into and control a pc via voice recognition. For
example, if the phone rang (and it would make a tone in my headset
when it did) I would simply say "Answer phone" and I would be
connected to the caller. If I chose not to answer I could say "Send
to voicemail" or something.
JP
On Sat, 04 Sep 2004 14:44:19 +0000, [email protected]
(Robert Bonomi) vaguely proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
>In article <[email protected]>,
>LRod <[email protected]> wrote:
>>On Fri, 03 Sep 2004 23:04:49 -0400, Jay Pique <[email protected]>
>>wrote:
>>
>>>Any of you grease monkeys out there know if the automotive folks are
>>>using something like this?
>>
>>I don't care for that term. I don't know a monkey that can rebuild a
>>carburetor.
>
>If, given enough time, they can write the complete works of Shakespeare,
>a mere carburetor should _not_ be much of a challenge.
Nah! Shaksper _never_ did his own mechanical work!
*****************************************************
the snappy ones are the best
Old Nick wrote:
> On Sat, 04 Sep 2004 11:23:33 GMT, "Dave jackson"
> <[email protected]> vaguely proposed a theory
> ......and in reply I say!:
>
> remove ns from my header address to reply via email
>
> I wish they said how ell it works....
>
Theoretically it is a standard hearing protector with a microphone and
speakers in each earmuff which shuts off at 85 db leaving just the
hearing protector.
Mine works poorly, failing to shut off a lot of the time. At low dB it
lets you hear conversation or the radio, but sounds extremely cheap and
tinny. Got mine as a gift and will sell it cheap.
>>Try these...
>>
>>
>>http://www.woodcraft.com/Woodcraft/product_family.asp?family%5Fid=5128&gift=False&0=dept%2Easp%2Cdept%5Fid%3D10000%26Tree%3D%2CDepartments&1=dept%2Easp%2Cdept%5Fid%3D1049%26menu%5Fid%3D%26Tree%3D0%2CShop%20Safety%20%26%20Accessories&2=dept%2Easp%2Cdept%5Fid%3D1110%26menu%5Fid%3D%26Tree%3D1%2CSafety%20%2D%20Ears&Gift=False&mscssid=08724B78874C24B11AB589190D0FD84D
>>
>>
>
> *****************************************************
> the snappy ones are the best
--
Gerald Ross, Cochran, GA
To reply add the numerals "13" before the "at"
...........................................
Phobia: what's left after drinking 2
out of a 6 pack
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Old Nick wrote:
> On Sat, 04 Sep 2004 09:51:38 -0500, Gerald Ross
> <[email protected]> vaguely proposed a theory
> ......and in reply I say!:
>
> remove ns from my header address to reply via email
>
>>Old Nick wrote:
>>> On Sat, 04 Sep 2004 11:23:33 GMT, "Dave jackson"
>>> <[email protected]> vaguely proposed a theory
>>> ......and in reply I say!:
>>>
>>> remove ns from my header address to reply via email
>>>
>>> I wish they said how ell it works....
>>>
>>Theoretically it is a standard hearing protector with a microphone and
>>speakers in each earmuff which shuts off at 85 db leaving just the
>>hearing protector.
>
> Yeah, that's fine. But how good is the passive hearing protection?
>
Not as good noise attenuation as with my old cheap WalMart earmuff
protectors.
Plus at times I had to reach up and turn off the microphone to get that.
Plus with the batteries it is heavier.
>>
>>Mine works poorly, failing to shut off a lot of the time. At low dB it
>>lets you hear conversation or the radio, but sounds extremely cheap and
>>tinny. Got mine as a gift and will sell it cheap.
>
> My hearing is _extremely dear_ to me (now that it's a bit too late :-<
> )
> *****************************************************
> the snappy ones are the best
--
Gerald Ross, Cochran, GA
To reply add the numerals "13" before the "at"
...........................................
Phobia: what's left after drinking 2
out of a 6 pack
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
On Fri, 03 Sep 2004 23:04:49 -0400, Jay Pique <[email protected]>
wrote:
>Any of you grease monkeys out there know if the automotive folks are
>using something like this?
I don't care for that term. I don't know a monkey that can rebuild a
carburetor.
Oops. Wrong newsgroup. Should be alt.tv.seinfeld
- -
LRod
Master Woodbutcher and seasoned termite
Shamelessly whoring my website since 1999
http://www.woodbutcher.net
On Sat, 04 Sep 2004 11:23:33 GMT, "Dave jackson"
<[email protected]> vaguely proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
I wish they said how ell it works....
>Try these...
>
>
>http://www.woodcraft.com/Woodcraft/product_family.asp?family%5Fid=5128&gift=False&0=dept%2Easp%2Cdept%5Fid%3D10000%26Tree%3D%2CDepartments&1=dept%2Easp%2Cdept%5Fid%3D1049%26menu%5Fid%3D%26Tree%3D0%2CShop%20Safety%20%26%20Accessories&2=dept%2Easp%2Cdept%5Fid%3D1110%26menu%5Fid%3D%26Tree%3D1%2CSafety%20%2D%20Ears&Gift=False&mscssid=08724B78874C24B11AB589190D0FD84D
>
>
*****************************************************
the snappy ones are the best
I should have added that if you want a mic to use for voice recognition in a
high noise environment, you probably should look for a jawbone pickup or
throat mic (if you can find it).
Greg
"Greg Millen" <[email protected]> wrote in message
news:[email protected]...
> Jay, you are looking for ANR (active noise reduction). Started out in the
> aviation area.
>
> --
> http://www.google.com/search?sourceid=navclient&ie=UTF-8&q=active+noise+reduction+headset
>
> Greg
>
>
> "Jay Pique" <[email protected]> wrote in message
> news:[email protected]...
>>I asked probably 30 different people at the IWF if they'd seen a
>> headset that can kill noise, yet allow normal conversation to be
>> heard, as well as provide for a high level of automation using voice
>> recognition technology. No one seems to have it.
>>
>> Any of you grease monkeys out there know if the automotive folks are
>> using something like this? It's gotta exist out there....
>>
>> JP
>> *************************
>> I'm just not that smart.
>
>
"Robert Bonomi" <[email protected]> wrote in message
news:1f8c7$4139d4c3$>
> If, given enough time, they can write the complete works of Shakespeare,
> a mere carburetor should _not_ be much of a challenge.
>
http://user.tninet.se/~ecf599g/aardasnails/java/Monkey/webpages/
Try these...
http://www.woodcraft.com/Woodcraft/product_family.asp?family%5Fid=5128&gift=False&0=dept%2Easp%2Cdept%5Fid%3D10000%26Tree%3D%2CDepartments&1=dept%2Easp%2Cdept%5Fid%3D1049%26menu%5Fid%3D%26Tree%3D0%2CShop%20Safety%20%26%20Accessories&2=dept%2Easp%2Cdept%5Fid%3D1110%26menu%5Fid%3D%26Tree%3D1%2CSafety%20%2D%20Ears&Gift=False&mscssid=08724B78874C24B11AB589190D0FD84D
"Jay Pique" <[email protected]> wrote in message
news:[email protected]...
> I asked probably 30 different people at the IWF if they'd seen a
> headset that can kill noise, yet allow normal conversation to be
> heard, as well as provide for a high level of automation using voice
> recognition technology. No one seems to have it.
>
> Any of you grease monkeys out there know if the automotive folks are
> using something like this? It's gotta exist out there....
>
> JP
> *************************
> I'm just not that smart.
Jay Pique <[email protected]> wrote in
news:[email protected]:
> I asked probably 30 different people at the IWF if they'd seen a
> headset that can kill noise, yet allow normal conversation to be
> heard, as well as provide for a high level of automation using voice
> recognition technology. No one seems to have it.
I'm not sure that I understand what you are asking for. There are lots of
noise cancelling headsets available, and many of them have microphones in
order to allow people to communicate. Here's an example:
www.websoft-solutions.net/ProductDetails.asp?ProductCode=Pel-MT7H7-Ser
However, where does voice recognition software come into this? It's not as
if the headsets need to recognize any voice commands.
Jay Pique <[email protected]> wrote in
news:[email protected]:
> Basically I'd like the headset shown in your link, that has the
> ability to tie into and control a pc via voice recognition.
That capability is already "built in", at least in a basic sense. Just
feed the headset microphone/audio leads into your PC's sound card. From
there, you need to buy a good voice recognition package to run on your PC.
> For
> example, if the phone rang (and it would make a tone in my headset
> when it did) I would simply say "Answer phone" and I would be
> connected to the caller. If I chose not to answer I could say "Send
> to voicemail" or something.
This is also software/hardware for your PC, and doesn't have anything to do
with the headset -- that is just the I/O device. PC software to do this
sort of thing is available from multiple companies. Try this company's
products for a start: www.andreaelectronics.com
Jay, you are looking for ANR (active noise reduction). Started out in the
aviation area.
--
http://www.google.com/search?sourceid=navclient&ie=UTF-8&q=active+noise+reduction+headset
Greg
"Jay Pique" <[email protected]> wrote in message
news:[email protected]...
>I asked probably 30 different people at the IWF if they'd seen a
> headset that can kill noise, yet allow normal conversation to be
> heard, as well as provide for a high level of automation using voice
> recognition technology. No one seems to have it.
>
> Any of you grease monkeys out there know if the automotive folks are
> using something like this? It's gotta exist out there....
>
> JP
> *************************
> I'm just not that smart.
Jay Pique wrote:
> Old Fangled <[email protected]> wrote:
>
>>Jay Pique <[email protected]> wrote in
>>news:[email protected]:
>>
>>> I asked probably 30 different people at the IWF if they'd seen a
>>> headset that can kill noise, yet allow normal conversation to be
>>> heard, as well as provide for a high level of automation using voice
>>> recognition technology. No one seems to have it.
>>
>>I'm not sure that I understand what you are asking for. There are lots of
>>noise cancelling headsets available, and many of them have microphones in
>>order to allow people to communicate. Here's an example:
>>
>>www.websoft-solutions.net/ProductDetails.asp?ProductCode=Pel-MT7H7-Ser
>>
>>However, where does voice recognition software come into this? It's not
>>as if the headsets need to recognize any voice commands.
>
> Thanks much for the link above - it's the closest thing I've seen to
> what I'm envisioning. There was an older thread called The Ultimate
> Earmuffs a while back - http://tinyurl.com/3sjsm - that got into more
> detail about functionality.
>
> Basically I'd like the headset shown in your link, that has the
> ability to tie into and control a pc via voice recognition. For
> example, if the phone rang (and it would make a tone in my headset
> when it did) I would simply say "Answer phone" and I would be
> connected to the caller. If I chose not to answer I could say "Send
> to voicemail" or something.
The voice recognition is really something that has to happen on the PC side.
<http://www.parliant.com/tellaphone/> looks interesting but haven't tried
it. You _might_ be able to use it with one of the Olympia Bluetooth phones
that lets you use just about any Bluetooth headset. Many Bluetooth
headsets have noise cancelling microphones and some are small enough that
you could use them in conjunction with a set of electronic noise-cancelling
earmuffs, but you'd have to find one with the controls located where the
could be reached with the muffs or or take one apart and wire in some
switches.
> JP
--
--John
Reply to jclarke at ae tee tee global dot net
(was jclarke at eye bee em dot net)
On Fri, 03 Sep 2004 23:04:49 -0400, Jay Pique <[email protected]>
vaguely proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
How much do you want to _spend_ on these things?
>I asked probably 30 different people at the IWF if they'd seen a
>headset that can kill noise, yet allow normal conversation to be
>heard, as well as provide for a high level of automation using voice
>recognition technology. No one seems to have it.
>
>Any of you grease monkeys out there know if the automotive folks are
>using something like this? It's gotta exist out there....
>
>JP
>*************************
>I'm just not that smart.
*****************************************************
the snappy ones are the best
On Sat, 04 Sep 2004 09:37:38 -0400, Jay Pique <[email protected]>
wrote:
>LRod <[email protected]> wrote:
>
>>On Fri, 03 Sep 2004 23:04:49 -0400, Jay Pique <[email protected]>
>>wrote:
>>
>>>Any of you grease monkeys out there know if the automotive folks are
>>>using something like this?
>>
>>I don't care for that term. I don't know a monkey that can rebuild a
>>carburetor.
>
>You are, of course, right. My apologies to the mechanics.
In the off chance that this slipped over everyone's heads, my line was
a quote from a Seinfeld episode. That was why I made mention of
alt.tv.seinfeld, a group which I also frequent.
- -
LRod
Master Woodbutcher and seasoned termite
Shamelessly whoring my website since 1999
http://www.woodbutcher.net
On Sat, 04 Sep 2004 22:08:17 -0500, Gerald Ross
<[email protected]> vaguely proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
OK. Thanks. I will stick my good oold "32dB" serious set for now, or
cough up for a $200 flier's rig.
>> Yeah, that's fine. But how good is the passive hearing protection?
>>
>Not as good noise attenuation as with my old cheap WalMart earmuff
>protectors.
>Plus at times I had to reach up and turn off the microphone to get that.
>Plus with the batteries it is heavier.
*****************************************************
the snappy ones are the best
On Sat, 04 Sep 2004 09:51:38 -0500, Gerald Ross
<[email protected]> vaguely proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
>Old Nick wrote:
>> On Sat, 04 Sep 2004 11:23:33 GMT, "Dave jackson"
>> <[email protected]> vaguely proposed a theory
>> ......and in reply I say!:
>>
>> remove ns from my header address to reply via email
>>
>> I wish they said how ell it works....
>>
>Theoretically it is a standard hearing protector with a microphone and
>speakers in each earmuff which shuts off at 85 db leaving just the
>hearing protector.
Yeah, that's fine. But how good is the passive hearing protection?
>
>Mine works poorly, failing to shut off a lot of the time. At low dB it
>lets you hear conversation or the radio, but sounds extremely cheap and
>tinny. Got mine as a gift and will sell it cheap.
My hearing is _extremely dear_ to me (now that it's a bit too late :-<
)
*****************************************************
the snappy ones are the best
On Sat, 04 Sep 2004 14:44:19 +0000, Robert Bonomi wrote:
>
> If, given enough time, they can write the complete works of Shakespeare, a
> mere carburetor should _not_ be much of a challenge.
There have been web monkeys pounding away at Usenet for about 20 years. No
Shakespeare yet.
--
http://cannaday.us (genealogy)
http://organic-earth.com (organic gardening)
Uptimes below for the machines that created / host these sites.
21:02:00 up 25 days, 3:42, 4 users, load average: 0.39, 0.27, 0.21
20:49:00 up 122 days, 4:50, 3 users, load average: 0.00, 0.00, 0.00
LRod <[email protected]> wrote:
>On Fri, 03 Sep 2004 23:04:49 -0400, Jay Pique <[email protected]>
>wrote:
>
>>Any of you grease monkeys out there know if the automotive folks are
>>using something like this?
>
>I don't care for that term. I don't know a monkey that can rebuild a
>carburetor.
You are, of course, right. My apologies to the mechanics.
JP