R.H. wrote:
> http://puzzlephotos.blogspot.com/
I know what #290 is: an insulator. Not sure exactly what
type, ie. where used. Electric fence maybe. The size tho
suggests something heavier, telephone line or power line?
The two metal ends do not connect inside. The ceramic
body exists to hold them, in a fixed distance apart, yet
not connected electrically. The bizarre shape, with
ridges, is so that high voltage corona is somewhat reduced,
air currents over those ridges will tend to stir the air
and break up an ionized air channel. So I'll guess it's
more for a power line. I don't see any mounting -- both
ends are designed to accept a bare wire -- so now I'm
wondering what it would be used on
#291 is a draftsman's eraser shield. You put that over your
drawing and apply your eraser in one of the holes, to erase
just the item you want. (Once upon a time, people made
technical drawings with pencil on paper.)
#292. Something familiar about it but it escapes me.
293. ditto. Artificial metal plant?
294. I've never, ever seen anything like this.
295. That's the blade out of a fancy potato cutter. But
where's the rest of it? How did it attach?
We used to play this game at Christmas time. Everybody had
to buy somebody else a wierd strange gift and the recipient
had to figure out what it was. If they couldn't they might
have to wait a year to find out.
Wood
On Fri, 11 Mar 2005 00:43:18 GMT, "R.H." <[email protected]> wrote:
>
>> 294 is a type of "wrench" used to remove steam pipe fittings.
>> i always saw them used to install and remove the union that goes
>> on the inlet of a steam radiator in home heating systems. The nipple
>> had two little ribs cast on the ID of the pipe that the tool would
>> engage in the cutouts. The steps are for different sized nipples,
>> and the square section is for a wrench to turn it with.
>> Can't remember what these are called, though...
>
>As I mentioned in another post, the seller told me it was for fixing dented
>pipes, but your answer sounds more likely. On one side of this tool it
>says "Chicago Spec. Mfg. Co." and the other side says "Malleable Iron
>Taiwan". Please let me know if you remember what it's called, I've been
>looking on the web but haven't found anything like it yet.
Radiator Step Wrench
Similar:
(this would be used with a ratchet, yours with an open wrench)
http://www.edirectory.co.uk/pf/static/880/mi/942/p1631942.html
Yes, used to unseat valves in steam radiators.
--
+ TomH + antonomasia-at-canada-dot-com
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?
Also: http://www.blakjak.demon.co.uk/gey_chr0.htm
"R.H." <[email protected]> wrote in message
news:[email protected]...
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
>
>
>
> Rob
>
290 - ceramic electrical insulator
291 - erasing guard for drafting
295 - a type of staple used for wood fastening
I thought I had a couple of testers in this set, but it looks like they've
all been answered correctly:
Spoilers:
290. Insulator, though I haven't had any luck verifying exactly what type
291. Drafter's erasing shield
292. Detail sanding tool, with sandpaper belt removed.
293. Corn dryer
294. Plumber's tool, the seller told me it was for fixing the ends of dented
pipes, you would insert this tool and turn it to bend the pipe back into
shape. Someone from the metalworking board posted that it's a type of
wrench used to remove steam pipe fittings, he replied only to that board but
you'll see more of his answer if you read my response to him.
295. Corrugated fastener, for connecting wood with mitered joints, such as
picture frames.
Rob
In article <[email protected]>,
"R.H." <[email protected]> wrote:
>Just posted some more photos tonight:
>
>http://puzzlephotos.blogspot.com/
>
>
>
>Rob
290. Alien TP roll holder. (they have wavy butts)
291. Mistake selector.
292. Rubber band tensioner.
293. Stupid goth kids trying to worship the Anti-Santa.
294. A Device.
295. Metal corn cob--only not with corn.
--
B.B. --I am not a goat! thegoat4 at airmail dot net
http://web2.airmail.net/thegoat4/
In article <[email protected]>,
"Leo Lichtman" <[email protected]> wrote:
[...]
>295 is a corrugated fastener--they were driven into the end grain of wooden
>boards to hold them together. A very common use was on the end boards of
>wooden produce boxes. These used to be called by a politically incorrect,
>offensive name
"liberals"? (:
--
B.B. --I am not a goat! thegoat4 at airmail dot net
http://web2.airmail.net/thegoat4/
> 294 is a type of "wrench" used to remove steam pipe fittings.
> i always saw them used to install and remove the union that goes
> on the inlet of a steam radiator in home heating systems. The nipple
> had two little ribs cast on the ID of the pipe that the tool would
> engage in the cutouts. The steps are for different sized nipples,
> and the square section is for a wrench to turn it with.
> Can't remember what these are called, though...
As I mentioned in another post, the seller told me it was for fixing dented
pipes, but your answer sounds more likely. On one side of this tool it
says "Chicago Spec. Mfg. Co." and the other side says "Malleable Iron
Taiwan". Please let me know if you remember what it's called, I've been
looking on the web but haven't found anything like it yet.
Rob
In article <[email protected]>,
R.H. <[email protected]> wrote:
>Just posted some more photos tonight:
>
>http://puzzlephotos.blogspot.com/
290: Terminals with insulator for high-voltage electrical wires. (At
only 4", not too high voltage though)
291: stencil
293: anchor
295: Corrugated nail, often used in picture frames
--
There's no such thing as a free lunch, but certain accounting practices can
result in a fully-depreciated one.
In article <[email protected]>,
[email protected] says...
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
>
>
>
> Rob
>
>
>
posting from rec.puzzles
290. a porcelein insulator?
291. a gasket?
292.
293. wouldn't want to be on wrong end of it! some form of
drag / trawl
294. a multi-key for very boring locks?
295. wood joining thingy
These are hard - first time I really havent had a clue for
any of selection.
Regards
Matthew Newell
R.H. wrote:
> Just posted some more photos tonight:
290. a "spark gap". Used in old phone lines and antenna leads. One
terminal was attach to a ground rod and the outside line and the feed
into the building were attached to the other terminal. If lightning hit
the the antenna or phone line, the surge would jump the gap and go to
ground instead of into the building.
291. An eraser shield
293. A hanger for drying leaf tobacco
294. A tool for installing/removing fittings on cast iron radiators
295. a corrugated staple for butt joining two pieces of wood
"R.H." <[email protected]> wrote in message
news:[email protected]...
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
>
>
>
# 289--holds a stack of 45 rpm vinyl records upon the spindle for automatic
play.
--
SVL
"Rich Grise" <[email protected]> wrote in message
news:[email protected]...
> On Thu, 10 Mar 2005 01:43:53 +0000, Leo Lichtman wrote:
>
>> 288 Exposure meter
>> 290 is a ceramic insulator
>> 291 is an eraser shield. Besides drafting, is was used for typing--in
>> the
>> days before whiteout and deletion paper.
>> 293 looks like a collectible piece of barbed wire
>> 295 is a corrugated fastener--they were driven into the end grain of
>> wooden
>> boards to hold them together. A very common use was on the end boards of
>> wooden produce boxes. These used to be called by a politically
>> incorrect,
>> offensive name
>>
> And what name might that be? You can rot13 it, if you're worried about the
> Morals Police.
^^^^^^^^^^^^^^^^^^
My e-mail to you bounced, so I guess I'll post it here:
WRJ ANVYF (Hope I got it right--ROT 13 is new to me.)
292 Sanding tool. Uses small sanding belts. Quite handy.
"R.H." <[email protected]> wrote in message
news:[email protected]...
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
>
>
>
> Rob
>
>
In article <[email protected]>,
R.H. <[email protected]> wrote:
>Just posted some more photos tonight:
>
>http://puzzlephotos.blogspot.com/
Posting from rec.crafts.metalworking:
290) Electrical insulator. Supported by a wire around one of the
grooves. It might be an insulator for connecting a long-wire
antenna to the downfeed wire. If I could see a parting line
anywhere, I would suggest that it be a feedthrough insulator for
going though a window or the like.
291) Erasing shield for an old typewriter without correction ability
built in.
292) It looks intended to wedge a sliding window from motion.
Perhaps a sliding rear window in a pickup truck, based on
the size. If it were larger, I would think that it was for a
sliding glass door.
293) For hanging some kind of foodstuffs to cure. if it were smaller
I would suggest that it was an early and nasty version of
barbed wire. It looks as though the spikes are cut free from
the shank and bent out.
294) A stepped wrench for unscrewing something -- perhaps some kind
of valve seats? Rather ugly casting, in any case, with no
apparent effort to clean off any flash.
295) I wish I remembered the name of this. It is intended to join
two pieces of wood edge to edge or end to end. The near edge is
driven in, with the stress along the width in use.
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
"R.H." <[email protected]> wrote in message
news:[email protected]...
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
290. Ceramic insulator for suspended electric cables. Keeps cables apart.
291. Template for erasures used by artists or draughtsmen. Prevents erasing
the wrong bits.
292. ??
293. Hanger for pantry, with spikes for game? Sadist's tie rack?
294. ??
295. Joinery nail used in making furniture.
--
Mike Dworetsky
(Remove "pants" spamblock to send e-mail)
>
#295 is of course a corrugated fastener, although when we were kids we
always called them "wiggly pins"
On Thu, 10 Mar 2005 00:42:47 GMT, "R.H." <[email protected]> wrote:
>Just posted some more photos tonight:
>
>http://puzzlephotos.blogspot.com/
>
>
>
>Rob
>
* R. H.
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
# 292
Golf training device?
Shoemaker inside measuring device?
# 293
Part of a fence
# 294
Axis part of some heavy gear machinery
--
Jon Haugsand
Dept. of Informatics, Univ. of Oslo, Norway, mailto:[email protected]
http://www.ifi.uio.no/~jonhaug/, Phone: +47 22 85 24 92
"R.H." <[email protected]> wrote in message
news:[email protected]...
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
I agree with Lane's answers but add that #292 holds a small loop of sand
paper for detail sanding.
294. Soma kinda stepa cutta?
On Thu, 10 Mar 2005 00:42:47 GMT, "R.H." <[email protected]> wrote:
>Just posted some more photos tonight:
>
>http://puzzlephotos.blogspot.com/
>
>
>
>Rob
>
#290: Insulator from an electric fencer
#291: Eraser shield for drafting
#292: Interested in seeing what this is, I think I've seen the spring end
on something, but I can't place it
#293: Fake flower stem for silk flowers
#294: Hole step gauge of some sort?
#295: Extruded lead?
+--------------------------------------------------------------------------------+
The absence of accidents does not mean the presence of safety
Army General Richard Cody
+--------------------------------------------------------------------------------+
"Dan White" <[email protected]> wrote in message
news:[email protected]...
>
> "R.H." <[email protected]> wrote in message
> news:[email protected]...
> > Just posted some more photos tonight:
> >
> > http://puzzlephotos.blogspot.com/
> >
> >
>
> 284 looks like a cleat (wrong term) for mountain climbing. You stick
that
> in a rock crevice and it opens up to make a good hold. The rope
through the
> cleat supports your weight.
>
> dwhite
Piton ?
Kris
On Thu, 10 Mar 2005 01:38:26 GMT, "Kris Baker"
<[email protected]> wrote:
>
>"Dan White" <[email protected]> wrote in message
>news:[email protected]...
>>
>> "R.H." <[email protected]> wrote in message
>> news:[email protected]...
>> > Just posted some more photos tonight:
>> >
>> > http://puzzlephotos.blogspot.com/
>> >
>> >
>>
>> 284 looks like a cleat (wrong term) for mountain climbing. You stick
>that
>> in a rock crevice and it opens up to make a good hold. The rope
>through the
>> cleat supports your weight.
>>
>> dwhite
>
>Piton ?
>
>Kris
>
Howdy,
Nope... wrong name.
A piton is hammered in place (frequently damaging the rock.)
This 284 gadget is essentially a set of cams. They can be
rolled to narrow their profile, placed in a crack in the
rockface, and then expanded. They don't damage the rock.
All the best,
--
Kenneth
If you email... Please remove the "SPAMLESS."
On Thu, 10 Mar 2005 01:43:53 +0000, Leo Lichtman wrote:
> 288 Exposure meter
> 290 is a ceramic insulator
> 291 is an eraser shield. Besides drafting, is was used for typing--in the
> days before whiteout and deletion paper.
> 293 looks like a collectible piece of barbed wire
> 295 is a corrugated fastener--they were driven into the end grain of wooden
> boards to hold them together. A very common use was on the end boards of
> wooden produce boxes. These used to be called by a politically incorrect,
> offensive name
>
And what name might that be? You can rot13 it, if you're worried about the
Morals Police.
Thanks,
Rich
On Sat, 12 Mar 2005 16:13:45 +0000, Leo Lichtman wrote:
> "Rich Grise" <[email protected]> wrote in message
>> On Thu, 10 Mar 2005 01:43:53 +0000, Leo Lichtman wrote:
>>> 295 is a corrugated fastener--they were driven into the end grain of
>>> wooden
>>> boards to hold them together. A very common use was on the end boards
>>> of wooden produce boxes. These used to be called by a politically
>>> incorrect,
>>> offensive name
>>>
>> And what name might that be? You can rot13 it, if you're worried about
>> the Morals Police.
> ^^^^^^^^^^^^^^^^^^
> My e-mail to you bounced, so I guess I'll post it here: WRJ ANVYF (Hope
> I got it right--ROT 13 is new to me.)
Apparently you got it right - it works for me. :-)
Presumably, it's used while Avttre-evt-ing a klooge. ;-)
Thanks!
Rich
"R.H." <[email protected]> wrote in message
news:[email protected]...
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
>
>
>
# 288
Light meter setting exposure in photography.
--
SVL
R.H. wrote:
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
> Rob
290. Insulator
291. Eraser shield
292. Some sort of ratchet tooth
293. Metal flower sculpture
294. Multi-head cutter
295. Corrugated fastener for joining two pieces of wood, like parts of
a picture frame.
from rec.crafts.metalworking
--
Gary Brady
Austin, TX
www.powdercoatoven.4t.com
288 Exposure meter
290 is a ceramic insulator
291 is an eraser shield. Besides drafting, is was used for typing--in the
days before whiteout and deletion paper.
293 looks like a collectible piece of barbed wire
295 is a corrugated fastener--they were driven into the end grain of wooden
boards to hold them together. A very common use was on the end boards of
wooden produce boxes. These used to be called by a politically incorrect,
offensive name
One you had recently, that I no longer see--an iron meteorite. I ran across
one for sale at a flea market last weekend.
"R.H." <[email protected]> wrote in message
news:[email protected]...
> Just posted some more photos tonight:
>
> http://puzzlephotos.blogspot.com/
>
>
284 looks like a cleat (wrong term) for mountain climbing. You stick that
in a rock crevice and it opens up to make a good hold. The rope through the
cleat supports your weight.
dwhite
"TomH" <[email protected]> wrote in message
news:[email protected]...
> On Fri, 11 Mar 2005 00:43:18 GMT, "R.H." <[email protected]> wrote:
>
> >
> >> 294 is a type of "wrench" used to remove steam pipe fittings.
> >> i always saw them used to install and remove the union that goes
> >> on the inlet of a steam radiator in home heating systems. The nipple
> >> had two little ribs cast on the ID of the pipe that the tool would
> >> engage in the cutouts. The steps are for different sized nipples,
> >> and the square section is for a wrench to turn it with.
> >> Can't remember what these are called, though...
> >
> >As I mentioned in another post, the seller told me it was for fixing
dented
> >pipes, but your answer sounds more likely. On one side of this tool it
> >says "Chicago Spec. Mfg. Co." and the other side says "Malleable Iron
> >Taiwan". Please let me know if you remember what it's called, I've been
> >looking on the web but haven't found anything like it yet.
>
>
> Radiator Step Wrench
>
> Similar:
> (this would be used with a ratchet, yours with an open wrench)
> http://www.edirectory.co.uk/pf/static/880/mi/942/p1631942.html
>
> Yes, used to unseat valves in steam radiators.
>
Thanks for the link.
Rob