Ray Durney wrote:
> Has anyone had experience with the new Grizzly 8" jointers manufactured in
> mainland China? I'm looking at either the G0593 or the G0586 model. Thanks
>
>
I've had one for about 6 weeks. It replaced my Grizzly 6". Only have run
about 40 bd ft of hard maple through it. Works great. I had to reset 2
of the knives.
STRONG Hint when assembling: Hook up the motor wiring BEFORE you mount
the jointer to the base. That way you can turn the base upside down and
actually see what you are doing. I followed the steps in the manual and
mounted the jointer first. Then had to wire the motor laying on my back
looking through a mirror. 5 minute job turned into an hour.
-jj
--
Remove BOB to email me
On Tue 27 Dec 2005 08:09:26a, TT <[email protected]> wrote in
news:[email protected]:
> Several people on the Woodnet forum have them and like them. Mine's
> on order. The price on the 586 goes up at the end of this month.
>
I've got the 586 and like it. So far I've only run about 50 bf of walnut
through it. The boards were all five feet long or longer and it was really
easy. After years with a little vintage sears 4-incher I thought there'd be
more of a trick to it. Very serious piece of machinery.
There was a rumor that the beds on these weren't stress relieved, but it
turned out actually be a rumor. :-)
You can get more if you search on "G0586" at google groups. The 586
especially has been much discussed.
On Tue 27 Dec 2005 10:01:45p, "Kyle Boatright" <[email protected]>
wrote in news:[email protected]:
> Woodnet forum? How do I find it?
>
> KB
Type "woodnet" into google, and hit the "I'm feeling lucky" button.
Several people on the Woodnet forum have them and like them. Mine's
on order. The price on the 586 goes up at the end of this month.
TT
On Mon, 26 Dec 2005 20:24:23 -0700, "Ray Durney"
<[email protected]> wrote:
>Has anyone had experience with the new Grizzly 8" jointers manufactured in
>mainland China? I'm looking at either the G0593 or the G0586 model. Thanks
>
"TT" <[email protected]> wrote in message
news:[email protected]...
> Several people on the Woodnet forum have them and like them. Mine's
> on order. The price on the 586 goes up at the end of this month.
>
> TT
Woodnet forum? How do I find it?
KB
"James "Cubby" Culbertson" <[email protected]> wrote in message
news:[email protected]...
> Any ideas how much it'll go up? I was in this same situation last year
> at Christmas time with my 1023SL. Order now or pay more next week type
> thing. Given the G0500 was up around $800 I suspect this one will jump to
> that point as well but just guessing.
> Cheers,
> cc
>
>
I actually found it.....appears the unit itself is going up around $30.
Shipping however is jumping around $50. So total increase after 12/31
would be in the neighborhood of $80.
Cheers,
cc
"TT" <[email protected]> wrote in message
news:[email protected]...
> Several people on the Woodnet forum have them and like them. Mine's
> on order. The price on the 586 goes up at the end of this month.
>
> TT
Any ideas how much it'll go up? I was in this same situation last year at
Christmas time with my 1023SL. Order now or pay more next week type thing.
Given the G0500 was up around $800 I suspect this one will jump to that
point as well but just guessing.
Cheers,
cc