Greetings All,
I am in the middle of a major remodel and would like to put T&G
cypress on one of the smaller walls, about 70 sq. ft. And hopefully use
the same material for door and window casings. I really like the
vertical grain clear flooring that Goodwin sells, but wonder if I can
buy something similar (even if it's not river reclaimed) and mill it up
myself. Any ideas out there??? TIA, Mark
In article <[email protected]>, "Mark L." <[email protected]> wrote:
>Chicagoland area
If you don't mind a little "road trip"... Hollingsworth Lumber, in
Russiaville, Indiana (some 30-40 miles NNW of Indianapolis), has cypress. Not
sure if they would have exactly what you're looking for, but Hollingsworth
carries good stuff at *very* reasonable prices. Might be worth a call.
(765) 883-5836
>
>Doug Miller wrote:
>
>> In article <[email protected]>, "Mark L."
> <[email protected]> wrote:
>>
>>>Greetings All,
>>> I am in the middle of a major remodel and would like to put T&G
>>>cypress on one of the smaller walls, about 70 sq. ft. And hopefully use
>>>the same material for door and window casings. I really like the
>>>vertical grain clear flooring that Goodwin sells, but wonder if I can
>>>buy something similar (even if it's not river reclaimed) and mill it up
>>>myself. Any ideas out there??? TIA, Mark
>>
>>
>> Where are ya?
>>
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
Chicagoland area
Doug Miller wrote:
> In article <[email protected]>, "Mark L." <[email protected]> wrote:
>
>>Greetings All,
>> I am in the middle of a major remodel and would like to put T&G
>>cypress on one of the smaller walls, about 70 sq. ft. And hopefully use
>>the same material for door and window casings. I really like the
>>vertical grain clear flooring that Goodwin sells, but wonder if I can
>>buy something similar (even if it's not river reclaimed) and mill it up
>>myself. Any ideas out there??? TIA, Mark
>
>
> Where are ya?
>
Thanks for the link, too bad they're closed till the end of September.....
[email protected] wrote:
> On Fri, 26 Aug 2005 05:16:51 GMT, "Mark L." <[email protected]>
> wrote:
>
>
>>Greetings All,
>> I am in the middle of a major remodel and would like to put T&G
>>cypress on one of the smaller walls, about 70 sq. ft. And hopefully use
>>the same material for door and window casings. I really like the
>>vertical grain clear flooring that Goodwin sells, but wonder if I can
>>buy something similar (even if it's not river reclaimed) and mill it up
>>myself. Any ideas out there??? TIA, Mark
>
>
>
> Try http://www.alvahardwoods.com/
>
> I got some real nice T&G cypress from these guys.
In article <[email protected]>, "Mark L." <[email protected]> wrote:
>Greetings All,
> I am in the middle of a major remodel and would like to put T&G
>cypress on one of the smaller walls, about 70 sq. ft. And hopefully use
>the same material for door and window casings. I really like the
>vertical grain clear flooring that Goodwin sells, but wonder if I can
>buy something similar (even if it's not river reclaimed) and mill it up
>myself. Any ideas out there??? TIA, Mark
Where are ya?
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
The wife and I may go to Amish country, may be worth a little side trip.
Thanks Doug
Doug Miller wrote:
> In article <[email protected]>, "Mark L." <[email protected]> wrote:
>
>>Chicagoland area
>
>
> If you don't mind a little "road trip"... Hollingsworth Lumber, in
> Russiaville, Indiana (some 30-40 miles NNW of Indianapolis), has cypress. Not
> sure if they would have exactly what you're looking for, but Hollingsworth
> carries good stuff at *very* reasonable prices. Might be worth a call.
> (765) 883-5836
>
>>Doug Miller wrote:
>>
>>
>>>In article <[email protected]>, "Mark L."
>>
>><[email protected]> wrote:
>>
>>>>Greetings All,
>>>>I am in the middle of a major remodel and would like to put T&G
>>>>cypress on one of the smaller walls, about 70 sq. ft. And hopefully use
>>>>the same material for door and window casings. I really like the
>>>>vertical grain clear flooring that Goodwin sells, but wonder if I can
>>>>buy something similar (even if it's not river reclaimed) and mill it up
>>>>myself. Any ideas out there??? TIA, Mark
>>>
>>>
>>>Where are ya?
>>>
>
>
On Fri, 26 Aug 2005 05:16:51 GMT, "Mark L." <[email protected]>
wrote:
>Greetings All,
> I am in the middle of a major remodel and would like to put T&G
>cypress on one of the smaller walls, about 70 sq. ft. And hopefully use
>the same material for door and window casings. I really like the
>vertical grain clear flooring that Goodwin sells, but wonder if I can
>buy something similar (even if it's not river reclaimed) and mill it up
>myself. Any ideas out there??? TIA, Mark
Try http://www.alvahardwoods.com/
I got some real nice T&G cypress from these guys.