I know there are several good books out there on tuning up the
woodworking machines. I just can't bring myself around to buying one
for the tablesaw, then one for the bandsaw then one for the router
table...
Does anyone out there know of a good book that covers several machines?
It doesn't have to go crazy on them but enough to get a machine
working in good shape...
Thanks in advance....
On 20 Jan 2005 21:27:12 -0800, "Toby" <[email protected]> vaguely
proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
On the other hand, \
TS:$500, book $15
BS$300+:book $15
etc
>I know there are several good books out there on tuning up the
>woodworking machines. I just can't bring myself around to buying one
>for the tablesaw, then one for the bandsaw then one for the router
>table...
>Does anyone out there know of a good book that covers several machines?
>It doesn't have to go crazy on them but enough to get a machine
>working in good shape...
>Thanks in advance....
On Sat, 22 Jan 2005 02:43:33 GMT, "Mark Jerde"
<[email protected]> wrote:
>Ba r r y wrote:
>
>> Got a local library?
>
>+1 library.
>
>My local library has about 3 feet of books.
>- Danny Proulx "Bldg Woodshop Workstations"
>- Pat Warner "The Router Book"
These two are also worth a look.
I feel so lucky. My local library, in a town of about 50,000, has (3)
4'x7' BAYS of woodworking books, and almost an entire bay of videos
and DVDs. Another bay of woodturning books and several of
metalworking finish out that side of the aisle.
Maybe this is a gloat! <G>
Barry
>>Does anyone out there know of a good book that covers several machines?
>>It doesn't have to go crazy on them but enough to get a machine
>>working in good shape...
"Tune up your Tools" by Sal MacCarone:
<http://www.amazon.com/exec/obidos/tg/detail/-/1558704094/qid=1106354272/sr=8-1/ref=sr_8_xs_ap_i1_xgl14/002-3272688-0615268?v=glance&s=books&n=507846>
Duginske's multi machine book:
<http://www.amazon.com/exec/obidos/tg/detail/-/0942391985/qid=1106354302/sr=1-1/ref=sr_1_1/002-3272688-0615268?v=glance&s=books>
Got a local library?
Barry
Ba r r y wrote:
> Got a local library?
+1 library.
My local library has about 3 feet of books. From my PDA:
- David Schiff & Kenneth S. Burton, Jr. "Jigs, Fixtures & Setups"
- R.J. DeCristoforo "The Jigs & Fixtures Bible"
- Udo Schmidt "Bldg Kitchen Cabinets"
- Danny Proulx "Bldg Woodshop Workstations"
- Pat Warner "The Router Book"
- Rex Cauldwell "Wiring A House"
- FWW "Shop Accessories You Can Build"
- Kelly Mehler "The Table Saw Book"
- Kenneth Burton "Cutting-Edge Table Saw Tips & Tricks"
- Norm Abram "The New Yankee Workshop"
- Bill Stankus "How to Design & Build Your Ideal Woodshop"
- Roger W. Cliffe "Table Saw Basics"
- Sando Nagyszalanczy "Woodshop Jigs & Fixtures"
Time/Life Books
- Routing & Shaping
- Shop-Made Jigs & Fixtures
- Advanced Routing
- "Closets, Space & Storage", Time/Life
- "Built-In Projects for the Home", Black & Decker
- Kenneth Burton "Cutting-Edge Table Saw Tips & Tricks"
- Mehler "The Table Saw Book"
- Duginske "The Art of the Band Saw"
- TimeLife "Sharpening & Tool Care"
I've checked this one out so many times someday I'll buy it. :-)
- Sando Nagyszalanczy "Woodshop Jigs & Fixtures"
-- Mark