A friend of mine gave me 10 sheets of commercial slot board, made out
of 3/4 inch cabinet-grade birch plywood, from a retail shop she was
moving. I used it to cover one of the unfinished walls of my
workshop. Looks great. The problem is, I can't find a manufacturer
of brackets for this type of slot board. This type has horizontal
slots, angled downward. The slots are about 4" apart. Every slot
board manufacturer on the web that I've seen only has brackets for
"T"-shaped slots.
Does anyone know where I can get brackets for "angled" slot board ?
Thanks ahead,
Tom
Greetings and Salutations...
On 19 Apr 2004 14:33:24 -0700, [email protected] (TomG) wrote:
>A friend of mine gave me 10 sheets of commercial slot board, made out
>of 3/4 inch cabinet-grade birch plywood, from a retail shop she was
>moving. I used it to cover one of the unfinished walls of my
>workshop. Looks great. The problem is, I can't find a manufacturer
>of brackets for this type of slot board. This type has horizontal
>slots, angled downward. The slots are about 4" apart. Every slot
>board manufacturer on the web that I've seen only has brackets for
>"T"-shaped slots.
>
>Does anyone know where I can get brackets for "angled" slot board ?
>
>Thanks ahead,
>Tom
Sounds like it would be dead simple to cut some 1" wide
sections of 1/8" steel and simply BEND a hook in the end to fit
the slotboard (or slatwall).
ALternatively, a couple of google searches produced
a large number of folks selling accessories for this product,
and some manufacturers, so perhaps that would be an effective
way to go. Search for "slatwall"...that seems to be a better
term.
Dave Mundt