I need help finding a round piece of wood

Garage Owl wrote:>Hello, i am looking for a piece of wood it needs to be 7 to 8
inches in
>diameter and 2 to 3 inches thick and the inside needs to be hollow.
>basically it needs to look like a ring, the measurement from inside to
>outside needs to be 1 inch any ideas, i don't have the tools necessary
>to do this i also need the inside to have a 1/4 inch lip around it on
>both sides to put glass in. but i do not want a chunk of a tree it is
>going to be a light when i am done if you can help or make this please
>let me know with a price please
>
>
Okay, lemme get this straight, 7-8 inches in diameter AND 2-3 inches thick.
Hmmmph. You're a curiosity. And I can't even spell "mortice". I'll do it for
200 dollars, and I'll throw in the glass. Make the obvious change in the e-mail
address. Tom
Someday, it'll all be over....

And you pay the postage
Someday, it'll all be over....

"GARAGE OWL" <[email protected]> wrote in message
news:[email protected]...
> Hello, i am looking for a piece of wood it needs to be 7 to 8 inches in
> diameter and 2 to 3 inches thick and the inside needs to be hollow.
> basically it needs to look like a ring, the measurement from inside to
> outside needs to be 1 inch any ideas, i don't have the tools necessary
> to do this i also need the inside to have a 1/4 inch lip around it on
> both sides to put glass in. but i do not want a chunk of a tree it is
> going to be a light when i am done if you can help or make this please
> let me know with a price please


Does it have to be made from one solid piece of wood or can it be cut from
pieces that have been glued together to make the block to start out with?
What kind of wood? The material can run from about $6 to over $20.
Ed

Tom spake thustly to the wRECk


"Okay, lemme get this straight, 7-8 inches in diameter AND 2-3 inches =
thick.
Hmmmph. You're a curiosity. And I can't even spell "mortice". I'll do it =
for
200 dollars, and I'll throw in the glass. Make the obvious change in the =
e-mail
address. Tom=20
Someday, it'll all be over...."

I outbid Tom I will do it for $210 plus shipping
Puff





"Tom" <[email protected]> wrote in message =
news:[email protected]...
> Garage Owl wrote:>Hello, i am looking for a piece of wood it needs to =
be 7 to 8
> inches in
> >diameter and 2 to 3 inches thick and the inside needs to be hollow.
> >basically it needs to look like a ring, the measurement from inside =
to
> >outside needs to be 1 inch any ideas, i don't have the tools =
necessary
> >to do this i also need the inside to have a 1/4 inch lip around it on
> >both sides to put glass in. but i do not want a chunk of a tree it is
> >going to be a light when i am done if you can help or make this =
please
> >let me know with a price please
> >
> >
> Okay, lemme get this straight, 7-8 inches in diameter AND 2-3 inches =
thick.
> Hmmmph. You're a curiosity. And I can't even spell "mortice". I'll do =
it for
> 200 dollars, and I'll throw in the glass. Make the obvious change in =
the e-mail
> address. Tom=20
> Someday, it'll all be over....