Air Filtration

How about the JDS 750ER? Works great and comes with an electro-static
filter for no extra charge.

Tom
"Salthead" <[email protected]> wrote in message
news:[email protected]...
> I'm looking at adding an air filtration system to the shop. I'm tired of
> wearing a dust mask for two hours after I use the equipment in this room,
> and let's not even talk about the fine layer of dust that settles on
> everything.
>
> It looks like the two viable options are the Deltal and Jet models. The
> shop is 18' x 22.5' with 10' foot ceilings.
>
> Does anyone have experience with either of these two brands? And should I
> spend the extra $150+ to get the larger Delta system?
>
>

I use two box fans. I use a good 3m filter up against the fan and one of
those cheapies in front of it. One of them is near the workbench and use it
mainly when I am sanding, the other is hanging from the ceiling and it made
a big difference.
I used to have lots of dust settling all over everything. Now there is very
little if any dust that settles. Then again my shop is a one car garage
about 12X18.
--
Mike S.
[email protected]
http://members.tripod.com/n0yii/woodworking.htm
"Salthead" <[email protected]> wrote in message
news:[email protected]...
> I'm looking at adding an air filtration system to the shop. I'm tired of
> wearing a dust mask for two hours after I use the equipment in this room,
> and let's not even talk about the fine layer of dust that settles on
> everything.
>
> It looks like the two viable options are the Deltal and Jet models. The
> shop is 18' x 22.5' with 10' foot ceilings.
>
> Does anyone have experience with either of these two brands? And should I
> spend the extra $150+ to get the larger Delta system?
>
>