I make a round plate for the 621, might be just the thing to simplify.
One at the http://www.patwarner.com/dw621.html.
***************************************************************
> I've lost my user manual and Dewalt's web site has no reference to the
> dimensions of the DW621 router base.
>
> Specifically, I'm looking for the dimension from the center of the
> router shaft to the outside of the the base: both the radius and
> flat.
>
>
> TIA
>
> Brian
Brian Schonecker wrote:
> I've lost my user manual and Dewalt's web site has no reference to the
> dimensions of the DW621 router base.
>
> Specifically, I'm looking for the dimension from the center of the
> router shaft to the outside of the the base: both the radius and
> flat.
Chuck a "V" bit in the router. Measure from the tip of the bit to the
edge of the base and to the flat.
--
Jack Novak
The centerline of the base through the router bit is marked with vertical
lines on the sides of the base. With that information you should have enough
to actually measure the dimensions you need. As I recall, the dimensions are
not in the manual anyway.
Bob
"Brian Schonecker" <[email protected]> wrote in message
news:[email protected]...
> I've lost my user manual and Dewalt's web site has no reference to the
> dimensions of the DW621 router base.
>
> Specifically, I'm looking for the dimension from the center of the
> router shaft to the outside of the the base: both the radius and
> flat.
>
>
> TIA
>
> Brian