Shop "Survivor"
"Wood Butcher" <[email protected]> wrote in message
news:m11Jb.35161$xX.114994@attbi_s02...
> And how long do you think it will last before the yuppie brigade takes
over
> and all they broadcast is useless crap like:
> While You Were Out in the Shop
> Trading Shop Spaces.
> What Not to Wear in the Shop
> Rally Round the Shop
> Poly - For Better or Worse.
>
> Art
>
> "Quadindad2" <[email protected]> wrote in message
> news:[email protected]...
> > I've got Norm withdrawals. I just checked the direct tv schedule and
there are
> > no woodworking shows on today. What we need is "THE WOODWORKERS
CHANNEL".
> > John
>
>
On Thu, 1 Jan 2004 14:57:38 -0600, Quadindad2 wrote
(in message <[email protected]>):
> I've got Norm withdrawals. I just checked the direct tv schedule and there
> are
> no woodworking shows on today. What we need is "THE WOODWORKERS CHANNEL".
> John
You obviously didn't get up early enough to watch David Marks "Wood Works" on
DIY this AM. ;-)
(FYI, he built a very nice bookcase that is actually something I could use
and just might attempt to build).
Wayne
Bay Area Dave <[email protected]> wrote in message news:<[email protected]>...
> go out to your shop, fire up your TS, and pretend YOU are Norm! :)
>
Don't forget to get the brad nailer out!
Sorry, couldn't resist!
Greg G. wrote in message news:<[email protected]>...
> Wood Butcher said:
>
> >And how long do you think it will last before the yuppie brigade takes over
> >and all they broadcast is useless crap like:
> >While You Were Out in the Shop
> >Trading Shop Spaces.
> >What Not to Wear in the Shop
> >Rally Round the Shop
> >Poly - For Better or Worse.
> >
> >Art
>
> Or worse than that, "Queer Eye for the WoodWorker Guy." <g>
>
"Now strip that wood. Strip it!"
Wood Butcher said:
>And how long do you think it will last before the yuppie brigade takes over
>and all they broadcast is useless crap like:
>While You Were Out in the Shop
>Trading Shop Spaces.
>What Not to Wear in the Shop
>Rally Round the Shop
>Poly - For Better or Worse.
>
>Art
Or worse than that, "Queer Eye for the WoodWorker Guy." <g>
Greg G.
Open ended questions would be flying:
How would you like to nail that for me?
Got any good wood lately?
What kind of screws do you prefer?
How do you make a tight butt joint?
"Ed. O." <[email protected]> wrote in message
news:[email protected]...
> Now that would be a funny show.
>
>
>
>
> --
> Ed. O.
> My woodworking projects at:
> http://www.amiigas.com
> Remove the NAIL from e-mail to reply
>
>
At least it wasn't Bob "I'm Overbudget" Vila. and his Craftsman henchmen.
"Montyhp" <montyhp at yahoo.com> wrote in message
news:[email protected]...
>
> "Wayne Brissette" <waynefb@earthlink_.net> wrote in message
> news:[email protected]...
> > On Thu, 1 Jan 2004 14:57:38 -0600, Quadindad2 wrote
> > (in message <[email protected]>):
> >
> > > I've got Norm withdrawals. I just checked the direct tv schedule and
> there
> > > are
> > > no woodworking shows on today. What we need is "THE WOODWORKERS
> CHANNEL".
> > > John
> >
> > You obviously didn't get up early enough to watch David Marks "Wood
Works"
> on
> > DIY this AM. ;-)
> [snip]
>
> I must have no life. I was even up early enough to catch Bruce Johnson
and
> learn a new joint, the infamous "pinned biscuit joint." One minute he
says
> that he loves the strength that pins add to a joint, then he proceeds to
put
> phony pins over a biscuit joint using "wood plugs he picked up at his home
> center". What a complete dork!
>
> Montyhp
>
>
I agree, but if there was a woodworking channel, we wouldnt get anything
done!! But what a great idea..I bet you one day there will be one. Robert
<[email protected]> wrote in message
news:[email protected]...
>
> "Quadindad2" <[email protected]> wrote in message
> news:[email protected]...
> > I've got Norm withdrawals. I just checked the direct tv schedule and
there
> are
> > no woodworking shows on today. What we need is "THE WOODWORKERS
CHANNEL".
> > John
>
> This is why God invented Tivo.
>
>
Quadindad2 wrote:
> I've got Norm withdrawals. I just checked the direct tv schedule and there are
> no woodworking shows on today. What we need is "THE WOODWORKERS CHANNEL".
> John
Take the dog for a walk and think about what you are currently working
on or what your next project will be. You would not believe how well the
dog helps you in this area.
:->
Jerry
"Montyhp" <montyhp at yahoo.com> said:
>I must have no life. I was even up early enough to catch Bruce Johnson and
>learn a new joint, the infamous "pinned biscuit joint." One minute he says
>that he loves the strength that pins add to a joint, then he proceeds to put
>phony pins over a biscuit joint using "wood plugs he picked up at his home
>center". What a complete dork!
>
>Montyhp
Apparently, Brucey doesn't have much of a life either. I was picking
up something at the local K-Mart Saturday, and guess who made a
personal appearance to demonstrate Minwax finishing products?
Bruce, I'm gonna cut my arm off with this cheap tablesaw, Johnson!
I left as soon as possible - The crowd could have turned ugly... <g>
Greg G.
David Babcock said:
>Open ended questions would be flying:
>
>How would you like to nail that for me?
>Got any good wood lately?
>What kind of screws do you prefer?
>How do you make a tight butt joint?
And don't forget:
Be sure the wood fits tight in the joint.
Make sure the penetration of your wood into the joint is complete.
Don't forget the white glue when you pound your butt joints together.
Enough already... I think I'm feeling ill...
I'll never look at a mortise and tenon the same again. <g>
Greg G.
On 01 Jan 2004 20:57:38 GMT, [email protected] (Quadindad2) wrote:
>I've got Norm withdrawals. I just checked the direct tv schedule and there are
>no woodworking shows on today. What we need is "THE WOODWORKERS CHANNEL".
>John
I'd rather see something along the lines of C-Span for woodworkers.
Put some webcams (shopcams) up in selected shops and just let 'em run.
The frame rate would have to be better than most of the webcam stuff
I've seen to date.
Real Email is: tjwatson1ATcomcastDOTnet
Website: http://home.comcast.net/~tjwatson1
And how long do you think it will last before the yuppie brigade takes over
and all they broadcast is useless crap like:
While You Were Out in the Shop
Trading Shop Spaces.
What Not to Wear in the Shop
Rally Round the Shop
Poly - For Better or Worse.
Art
"Quadindad2" <[email protected]> wrote in message
news:[email protected]...
> I've got Norm withdrawals. I just checked the direct tv schedule and there are
> no woodworking shows on today. What we need is "THE WOODWORKERS CHANNEL".
> John
On Thu, 01 Jan 2004 20:57:38 +0000, Quadindad2 wrote:
> I've got Norm withdrawals. I just checked the direct tv schedule and there are
> no woodworking shows on today. What we need is "THE WOODWORKERS CHANNEL".
> John
Disagree.
What we need is more money to buy our toys and more time to play with
them. Watching TV and operating a shaper or jointer works only if one has
already cut off the fingers.
We also need less interference from spouses, the telephone, etc.
On 01 Jan 2004 20:57:38 GMT, [email protected] (Quadindad2) wrote:
>I've got Norm withdrawals. I just checked the direct tv schedule and there are
>no woodworking shows on today. What we need is "THE WOODWORKERS CHANNEL".
>John
That would not be good. I would have to get cable then.
"Quadindad2" <[email protected]> wrote in message
news:[email protected]...
> I've got Norm withdrawals. I just checked the direct tv schedule and there
are
> no woodworking shows on today. What we need is "THE WOODWORKERS CHANNEL".
> John
This is why God invented Tivo.
"Wayne Brissette" <waynefb@earthlink_.net> wrote in message
news:[email protected]...
> On Thu, 1 Jan 2004 14:57:38 -0600, Quadindad2 wrote
> (in message <[email protected]>):
>
> > I've got Norm withdrawals. I just checked the direct tv schedule and
there
> > are
> > no woodworking shows on today. What we need is "THE WOODWORKERS
CHANNEL".
> > John
>
> You obviously didn't get up early enough to watch David Marks "Wood Works"
on
> DIY this AM. ;-)
[snip]
I must have no life. I was even up early enough to catch Bruce Johnson and
learn a new joint, the infamous "pinned biscuit joint." One minute he says
that he loves the strength that pins add to a joint, then he proceeds to put
phony pins over a biscuit joint using "wood plugs he picked up at his home
center". What a complete dork!
Montyhp