This will appear to be a dumb question, but when it comes to small projects,
I sometimes shoot blanks.
I view these photos of shawl pins
http://www.google.co.uk/search?hl=en&rlz=&=&q=wood+shawl+pin&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1781&bih=868&tbm=isch
and think, "why can't I make them?" Then think I would need more detailed
type tools, which I don't really have, I think. Therefore, what would you
suggest as required tools needed to make these small items or could they
mostly be finished by old fashioned hand shaping and sanding?
Never thought about making shawl pins. Would be some nice little projects =
to try.
For making just a few, hand cutting the basic forms, maybe initial sanding =
with a drill attachment or similar detail sander, then hand sanding the fin=
al form shouldn't be too difficult.
If producing many dozens, a few dedicated tools for the series of specific =
tasks would certainly be a benefit and probably called for. A dedicated wo=
rk station and tool for each task. I would think the final form finishing =
would entail hand sanding only. =20
A dremel tool, a small sanding attachment for a hand drill, maybe a small w=
heel sander/buffer of some sort. I would need to do a few to start to get =
an idea of what tool would work best for each task. Maybe even fabricate y=
our own dedicated tool for some unusual design task.
As for finish coatings, pins made of different woods would/may need differe=
nt finishes, so dedicated finishing stations would be a benefit, also.
Make a few simple forms, by hand, and decide what tools might make the hand=
tasks go faster or do a better job.
Would some sort of small vise be needed, also..... maybe one whose jaws are=
padded or leather lined, so as not to mar the delicate work.
Sonny
"dadiOH" <[email protected]> wrote in message
news:[email protected]...
> Sonny wrote:
>> On Sunday, December 23, 2012 8:06:44 AM UTC-6, dadiOH wrote:
>>
>>>
>>> 3. a jigsaw (for the clasps, both for thickness and shape)
>>
>> And/or small scroll saw?
>
> I call a scroll saw a jig saw. Whet you probably call a jig saw is what I
> call a saber saw. so yes, a scroll/jig saw.
>
> --
>
> dadiOH
A fret saw might be preferable to scroll/jig saw. Much more control.
If I were making these, I would do all by hand.
I think the nature of the item requires each to be individual and unique.
More time consuming but ultimately more rewarding.
Just my, right pondian, 2P's worth.
YMMV.
I very much enjoy this group.
Best wishes to all for a happy Cristmas and a better new year.
Nick.
"G. Ross" <[email protected]> wrote in message
news:[email protected]...
> Meanie wrote:
>> This will appear to be a dumb question, but when it comes to small
>> projects,
>> I sometimes shoot blanks.
>>
>>
>> I view these photos of shawl pins
>> http://www.google.co.uk/search?hl=en&rlz=&=&q=wood+shawl+pin&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1781&bih=868&tbm=isch
>> and think, "why can't I make them?" Then think I would need more detailed
>> type tools, which I don't really have, I think. Therefore, what would you
>> suggest as required tools needed to make these small items or could they
>> mostly be finished by old fashioned hand shaping and sanding?
>>
>>
> Find some wooden (not bamboo) Japanese style chopsticks and start
> whittling. I think Chinese and Korean ones are blunt ended and Japanese
> are pointed.
>
> --
> G.W. Ross
>
> 'Bother,' said Pooh, as he saw the
> mushroom cloud.
>
> LOL....that's a good idea and good start, but the other part of the set is
> the main focus. I kow they are called Shawl pins, but it's the entire set
> (pin and whatever they call the main item).
>
>
>
>
Meanie wrote:
> This will appear to be a dumb question, but when it comes to small
> projects, I sometimes shoot blanks.
>
>
> I view these photos of shawl pins
> http://www.google.co.uk/search?hl=en&rlz=&=&q=wood+shawl+pin&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1781&bih=868&tbm=isch
> and think, "why can't I make them?" Then think I would need more
> detailed type tools, which I don't really have, I think. Therefore,
> what would you suggest as required tools needed to make these small
> items or could they mostly be finished by old fashioned hand shaping
> and sanding?
I think the vast majority of those to which you linked were probably made in
3rd world countries by hand, possibly assisted with a rudimentary lathe.
If I wanted to do the same, I'd get...
1. a good knife
2. a small lathe such as those used to make pens (if you want the pins to be
symmetrical or if you want round clasps)
3. a jigsaw (for the clasps, both for thickness and shape)
4. a small belt/disc combo sander, something like 1" belt, 6" disc
You would also need a way to drill holes in the clasp and a way to get the
material to rough size for the pins. Buffing and sanding wheels for the
lathe would be handy and could replace the sander.
If you wanted to mass produce clasps of a particular shape a small router
and made by you templates would work.
And yes, all could be made by hand, not that hard, just time intensive.
--
dadiOH
____________________________
Winters getting colder? Tired of the rat race?
Maybe just ready for a change? Check it out...
http://www.floridaloghouse.net
Sonny wrote:
> On Sunday, December 23, 2012 8:06:44 AM UTC-6, dadiOH wrote:
>
>>
>> 3. a jigsaw (for the clasps, both for thickness and shape)
>
> And/or small scroll saw?
I call a scroll saw a jig saw. Whet you probably call a jig saw is what I
call a saber saw. so yes, a scroll/jig saw.
--
dadiOH
____________________________
Winters getting colder? Tired of the rat race?
Maybe just ready for a change? Check it out...
http://www.floridaloghouse.net
I decided to try making one and to my own surprise, it's not bad. I
practiced on a piece of pine, used the BS for the outline cut, drilled a
hole for the center, used the scroll saw for the inner outline cut and
sanded, partially power sanding and finished hand sanding with emery cloth
and will use a finer grit for final sanding. Though I have a lathe, the idea
of using the drill chuck and sanding the pin while spinning was good and
worked well, then I hand sanded the rest since the shape of the head
differed.
Overall, not being a wordworking expert, especially compared to some of the
work I've seen from many of you, I'm pleased with it thus far. I'll see what
it looks like after a final sanding then a finish.Practice makes perfect and
I may try to develop a system and make more. The wife is a knitter and likes
them. If I become good, I could sell a few.
Thanks for the inputs.
Meanie wrote:
> This will appear to be a dumb question, but when it comes to small projects,
> I sometimes shoot blanks.
>
>
> I view these photos of shawl pins
> http://www.google.co.uk/search?hl=en&rlz=&=&q=wood+shawl+pin&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1781&bih=868&tbm=isch
> and think, "why can't I make them?" Then think I would need more detailed
> type tools, which I don't really have, I think. Therefore, what would you
> suggest as required tools needed to make these small items or could they
> mostly be finished by old fashioned hand shaping and sanding?
>
>
Find some wooden (not bamboo) Japanese style chopsticks and start
whittling. I think Chinese and Korean ones are blunt ended and
Japanese are pointed.
--
G.W. Ross
'Bother,' said Pooh, as he saw the
mushroom cloud.
On 12/22/2012 5:51 PM, Meanie wrote:
> This will appear to be a dumb question, but when it comes to small projects,
> I sometimes shoot blanks.
>
>
> I view these photos of shawl pins
> http://www.google.co.uk/search?hl=en&rlz=&=&q=wood+shawl+pin&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1781&bih=868&tbm=isch
> and think, "why can't I make them?" Then think I would need more detailed
> type tools, which I don't really have, I think. Therefore, what would you
> suggest as required tools needed to make these small items or could they
> mostly be finished by old fashioned hand shaping and sanding?
For the more simply one, chuck one of G. W.'s whittled down chopsticks,
or any other thin cut stock, in a power drill or drill press, grab some
sandpaper, and ....
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://plus.google.com/114902129577517371552/posts
KarlCaillouet@ (the obvious)
On 12/23/2012 1:49 PM, Meanie wrote:
> I decided to try making one and to my own surprise, it's not bad. I
> practiced on a piece of pine, used the BS for the outline cut, drilled a
> hole for the center, used the scroll saw for the inner outline cut and
> sanded, partially power sanding and finished hand sanding with emery cloth
> and will use a finer grit for final sanding. Though I have a lathe, the idea
> of using the drill chuck and sanding the pin while spinning was good and
> worked well, then I hand sanded the rest since the shape of the head
> differed.
>
> Overall, not being a wordworking expert, especially compared to some of the
> work I've seen from many of you, I'm pleased with it thus far. I'll see what
> it looks like after a final sanding then a finish.Practice makes perfect and
> I may try to develop a system and make more. The wife is a knitter and likes
> them. If I become good, I could sell a few.
>
> Thanks for the inputs.
Alway nice to hear someone followup on the results ... thanks for doing
that and Merry Christmas.
--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://plus.google.com/114902129577517371552/posts
KarlCaillouet@ (the obvious)