help finding Templet guides

Hi Sam -

We have both sizes... 1 3/4, and 1 1/2...

Cheers -

Rob Lee
Lee Valley

"SamTheCat" <[email protected]> wrote in message
news:[email protected]...
> Andrew -- checked there, the templets they sell seem to be for a 1 3/4"
> hole -- the PC690 has a 1 1/2" hole for mounting these guides
>
> "Andrew" <[email protected]> wrote in message
> news:[email protected]...
> > www.Leevalley.com
> > think they have what you need
> >
> >
>
>

www.Leevalley.com
think they have what you need

Might wish to reverse engineer this then, and look for a replacement
baseplate and then the attainable guide bushings.
Might prove to be an easier task

Try here
www.oak-park.com
they have 1.5 bushings for the PC, and a whole bunch of other router stuff

Rob Lee wrote:

> Hi Sam -
>
> We have both sizes... 1 3/4, and 1 1/2...
>
> Cheers -
>
> Rob Lee
> Lee Valley

Hi Robin,

I guess that guy that thought that you were female really got
to you, huh?

ARM ;-)

Eric, I had same problem, ended up making new ones out of wood, on my
lathe. I used an adjustable wrench (cresant?) that was mic'd to the
exact diameter I wanted and turned a piece of hard maple down till the
wrench fit. Worked great and was easy to fine-tune the size. Kinda
tricky keeping the unit in place on router since I wanted it to rotate
as I moved along. This might not work with real small diameter, but
maybe you don't need that small anyway. Good luck, Tom.

"SamTheCat" <[email protected]> wrote in message news:<[email protected]>...
> I am searching for Templet guides for the PC 690 series routers. On the PC
> site there is a nice variety, some of which would be useful. I should say
> that I already have the "Standard kit" and I am looking for a guide outside
> of the "normal" set. When I search for a suppler I am inevitably linked to
> amazon.com. Not a problem, but some of the templates I want are
> "discontinued or not in stock" Of the 3 I want (or could use) only one is
> available with a 1-2 week ship time. Soooooo anybody got another source I
> could check ? I am looking for a Templet with an OD of 1.25" +
>
>
> TIA
> Eric

Andrew -- checked there, the templets they sell seem to be for a 1 3/4"
hole -- the PC690 has a 1 1/2" hole for mounting these guides

"Andrew" <[email protected]> wrote in message
news:[email protected]...
> www.Leevalley.com
> think they have what you need
>
>