On Sun, 09 May 2004 14:16:09 GMT, "cp" <[email protected]> wrote:
>I'm looking to put create hard smooth surface covering on top of my Cast
>Aluminum patio table...
>
>The table has a pattern that has too many holes (nature of the beast).
>
>Any suggestions on how one my construct something like this....
>
>Thanks
>
choose a material and get some.
tempered glass.
granite.
marble.
flagstone.
slate.
stainless steel.
........
Either have a piece of glass cut/fitted or use ceramic tile. If you go the
tile route, the table will be heavy enough (and possibly fragile enough) you
may never want to move it.
KB
"cp" <[email protected]> wrote in message
news:J2rnc.12317$z06.2091605@attbi_s01...
> I'm looking to put create hard smooth surface covering on top of my Cast
> Aluminum patio table...
>
> The table has a pattern that has too many holes (nature of the beast).
>
> Any suggestions on how one my construct something like this....
>
> Thanks
>
>
Concrete.. seriously.
Kyle Boatright wrote:
> Either have a piece of glass cut/fitted or use ceramic tile. If you go the
> tile route, the table will be heavy enough (and possibly fragile enough) you
> may never want to move it.
>
> KB
> "cp" <[email protected]> wrote in message
> news:J2rnc.12317$z06.2091605@attbi_s01...
>
>>I'm looking to put create hard smooth surface covering on top of my Cast
>>Aluminum patio table...
>>
>>The table has a pattern that has too many holes (nature of the beast).
>>
>>Any suggestions on how one my construct something like this....
>>
>>Thanks
>>
>>
>
>
>
--
--
John G. in Memphis, TN Have a nice......... night.
http://www.shavings.net/images/Memphis/reflect_john.jpg