FYI--I bought the exact same one from Highland Hardware. There were two
problems: 1) no directions and/or easy ability calibrate (scale was
off slightly), 2) once you find the angle you want, the set screw
doesn't hold the position very well. One small nudge and it's off the
mark.
Mike
Alan McClure wrote:
> Here's what I plan on getting when finances allow.
> Accurate to 5 minutes of angle and priced at US$39.95
> http://www.grizzly.com/products/item.cfm?itemnumber=G9900
>
> ARM
>
> John Pilhoefer wrote:
>
>
>>I am looking for an AngleWright precision protractor.
>>
>>Like this one:
>>
>>http://www.anglewright.com/prod01A.htm
>>
>>It seems they are no longer being produced.
>>
>>Anyone know were one could be found or if
>>someone is producing something comparable.
>>
>>Thank everyone,
>>
>>John
>
>
On Mon, 26 Apr 2004 00:47:07 GMT, "John Pilhoefer"
<[email protected]> wrote:
>I am looking for an AngleWright precision protractor.
>
>Like this one:
>
>http://www.anglewright.com/prod01A.htm
>
>It seems they are no longer being produced.
>
>Anyone know were one could be found or if
>someone is producing something comparable.
I don't know about that one in particular, but there's a similar
plastic drafting tool [different purpose of course], if they still
make those also. I have one, and a plastic drafting 45,45 triangle I
use constantly to set the miter to blade. I think you might still
find one in an arts supply store. Worth a look around.
Dan.
Here's what I plan on getting when finances allow.
Accurate to 5 minutes of angle and priced at US$39.95
http://www.grizzly.com/products/item.cfm?itemnumber=G9900
ARM
John Pilhoefer wrote:
> I am looking for an AngleWright precision protractor.
>
> Like this one:
>
> http://www.anglewright.com/prod01A.htm
>
> It seems they are no longer being produced.
>
> Anyone know were one could be found or if
> someone is producing something comparable.
>
> Thank everyone,
>
> John
This is a multi-part message in MIME format.
------=_NextPart_000_03FF_01C42B0A.FB2E4F40
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
eBay! Do a search and save it with email notification.
Bubba ~~~_/) ~~~
On Apalachee Bay - The Pirate Coast
Home of Billy Bowlegs and Mysterious Waters
Wakulla County, Florida
~Wet Dreams~=20
Hull Number 158
"John Pilhoefer" <[email protected]> wrote in message =
news:[email protected]...
I am looking for an AngleWright precision protractor.
Like this one:
http://www.anglewright.com/prod01A.htm
It seems they are no longer being produced.
Anyone know were one could be found or if
someone is producing something comparable.
Thank everyone,
John
------=_NextPart_000_03FF_01C42B0A.FB2E4F40
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000080>eBay! Do a search and save it with =
email=20
notification.</FONT></DIV>
<DIV><BR><FONT color=3D#000080>Bubba ~~~_/) ~~~<BR>On Apalachee =
Bay - The=20
Pirate Coast<BR>Home of Billy Bowlegs and Mysterious Waters<BR>Wakulla =
County,=20
Florida<BR>~Wet Dreams~ <BR>Hull Number 158<BR></FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"John Pilhoefer" <<A=20
href=3D"mailto:[email protected]">[email protected]</A>> wrote =
in message=20
<A=20
=
href=3D"news:[email protected]">news:f_Yic.25395$NR5=
[email protected]</A>...</DIV>I=20
am looking for an AngleWright precision protractor.<BR><BR>Like this=20
one:<BR><BR><A=20
=
href=3D"http://www.anglewright.com/prod01A.htm">http://www.anglewright.co=
m/prod01A.htm</A><BR><BR>It=20
seems they are no longer being produced.<BR><BR>Anyone know were one =
could be=20
found or if<BR>someone is producing something comparable.<BR><BR>Thank =
everyone,<BR><BR>John<BR><BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_03FF_01C42B0A.FB2E4F40--
This is a multi-part message in MIME format.
------=_NextPart_000_0050_01C42AFC.D0E7E4C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Thanks for the tip. I did not know about the ebay-email feature.
"007" <[email protected]> wrote in message =
news:[email protected]...
eBay! Do a search and save it with email notification.
Bubba ~~~_/) ~~~
On Apalachee Bay - The Pirate Coast
Home of Billy Bowlegs and Mysterious Waters
Wakulla County, Florida
~Wet Dreams~=20
Hull Number 158
"John Pilhoefer" <[email protected]> wrote in message =
news:[email protected]...
I am looking for an AngleWright precision protractor.
Like this one:
http://www.anglewright.com/prod01A.htm
It seems they are no longer being produced.
Anyone know were one could be found or if
someone is producing something comparable.
Thank everyone,
John
------=_NextPart_000_0050_01C42AFC.D0E7E4C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4134.600" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Thanks for the tip. I did not know =
about the=20
ebay-email feature.</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"007" <<A=20
=
href=3D"mailto:[email protected]">[email protected]</A>>=
wrote=20
in message <A=20
=
href=3D"news:[email protected]">news:[email protected]=
a.com</A>...</DIV>
<DIV><FONT color=3D#000080>eBay! Do a search and save it with =
email=20
notification.</FONT></DIV>
<DIV><BR><FONT color=3D#000080>Bubba ~~~_/) ~~~<BR>On Apalachee =
Bay - The=20
Pirate Coast<BR>Home of Billy Bowlegs and Mysterious Waters<BR>Wakulla =
County,=20
Florida<BR>~Wet Dreams~ <BR>Hull Number 158<BR></FONT></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"John Pilhoefer" <<A=20
href=3D"mailto:[email protected]">[email protected]</A>> =
wrote in=20
message <A=20
=
href=3D"news:[email protected]">news:f_Yic.25395$NR5=
[email protected]</A>...</DIV>I=20
am looking for an AngleWright precision protractor.<BR><BR>Like this =
one:<BR><BR><A=20
=
href=3D"http://www.anglewright.com/prod01A.htm">http://www.anglewright.co=
m/prod01A.htm</A><BR><BR>It=20
seems they are no longer being produced.<BR><BR>Anyone know were one =
could=20
be found or if<BR>someone is producing something =
comparable.<BR><BR>Thank=20
=
everyone,<BR><BR>John<BR><BR></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0050_01C42AFC.D0E7E4C0--
Love and use my Bevel Boss all the time. GREAT product
John
On Mon, 26 Apr 2004 23:27:26 GMT, "John Pilhoefer"
<[email protected]> wrote:
>Found this:
>
>http://www.sutherlandtool.com/
>
>The bevel boss.
>
>Think I will order one and give it a try.
>
>Thanks,
>John
>
>"MikeM" <[email protected]> wrote in message
>news:[email protected]...
>> FYI--I bought the exact same one from Highland Hardware. There were two
>> problems: 1) no directions and/or easy ability calibrate (scale was
>> off slightly), 2) once you find the angle you want, the set screw
>> doesn't hold the position very well. One small nudge and it's off the
>> mark.
>>
>> Mike
>>
>>
>> Alan McClure wrote:
>>
>> > Here's what I plan on getting when finances allow.
>> > Accurate to 5 minutes of angle and priced at US$39.95
>> > http://www.grizzly.com/products/item.cfm?itemnumber=G9900
>> >
>> > ARM
>> >
>> > John Pilhoefer wrote:
>> >
>> >
>> >>I am looking for an AngleWright precision protractor.
>> >>
>> >>Like this one:
>> >>
>> >>http://www.anglewright.com/prod01A.htm
>> >>
>> >>It seems they are no longer being produced.
>> >>
>> >>Anyone know were one could be found or if
>> >>someone is producing something comparable.
>> >>
>> >>Thank everyone,
>> >>
>> >>John
>> >
>> >
>>
>
Found this:
http://www.sutherlandtool.com/
The bevel boss.
Think I will order one and give it a try.
Thanks,
John
"MikeM" <[email protected]> wrote in message
news:[email protected]...
> FYI--I bought the exact same one from Highland Hardware. There were two
> problems: 1) no directions and/or easy ability calibrate (scale was
> off slightly), 2) once you find the angle you want, the set screw
> doesn't hold the position very well. One small nudge and it's off the
> mark.
>
> Mike
>
>
> Alan McClure wrote:
>
> > Here's what I plan on getting when finances allow.
> > Accurate to 5 minutes of angle and priced at US$39.95
> > http://www.grizzly.com/products/item.cfm?itemnumber=G9900
> >
> > ARM
> >
> > John Pilhoefer wrote:
> >
> >
> >>I am looking for an AngleWright precision protractor.
> >>
> >>Like this one:
> >>
> >>http://www.anglewright.com/prod01A.htm
> >>
> >>It seems they are no longer being produced.
> >>
> >>Anyone know were one could be found or if
> >>someone is producing something comparable.
> >>
> >>Thank everyone,
> >>
> >>John
> >
> >
>