209 - - Looks like a butter paddle. When butter is churned there is
always a little milk left behind
so it has to be "washed" so the butter won't spoil rapidly. A small
amount of water is added to a
bowl of freshly churned butter and worked into the butter to wash out
the milk. Kind of like kneading
bread. But this one looks too worn in the middle for some reason.
Shirley in Oregon
DoN. Nichols wrote:
>In article <[email protected]>,
>R.H. <[email protected]> wrote:
>
>
>>Just posted more photos and answers to the previous set:
>>
>>http://puzzlephotos.blogspot.com/
>>
>>
>
> Hmm ... 207 looks like some sort of bushing designed to press
> into a hole in wood. Perhaps about something like 1/4"
> through hole to act as some kind of low-duty bearing, or
> perhaps internally threaded beyond the end of the
> currently visible portion of the hole.
>
> 208 -- perhaps the winding of wire to bind a small hand broom
> together? Though, depending on the lighting, it could
> perhaps be a rectangular wound spring.
>
> 209 -- Perhaps something to shape clay on a potter's wheel?
>
> 210 -- no guess.
>
> 211 -- ditto
>
> 212 -- Some kind of anvil for forming rings, normally clamped in
> a vise by the square section?
>
> Enjoy,
> DoN.
>
>
Item 211 is a miniature sanding block. It is part of a set that
contains several different profiles. I believe the set is still
available.
Item 212 may be a home-made precision straight edge. It looks similar
to one I have in a DoAll Precision Inspection Kit.
I have no idea what Item 202 is, but I am guessing it is some sort of
kingpin or tie rod end reamer.
Item 209 looks like a worn out sand casting mold ram.
Buy from you? You can't even spam right.
"Kris" <[email protected]> wrote in message
news:[email protected]...
> "DanG" <[email protected]> wrote in message
news:<KxYrd.62634$_g6.26342@okepread03>...
> > 207. Honestly do not know, but a guess that it might be some type
> > of threaded insert.
> >
> > 208. Narrow crown staples.
> >
> > 209. Looks to be wooden. I am guessing something used in a
> > bakery.
> >
> > 210. Coarse toothed wood rasp.
> >
> > 211. Sheet metal bending jig.
> >
> > 212. No earthly idea.
> >
> >
> >
> >
> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> > Keep the whole world singing . . . .
> > DanG (remove the sevens)
> > [email protected]
> >
> >
> >
> > "R.H." <[email protected]> wrote in message
> > news:[email protected]...
> > > Just posted more photos and answers to the previous set:
> > >
> > > http://puzzlephotos.blogspot.com/
>
> ____________________________
>
> Click on the below link, you may find some of our specialty handtools
> to be of help. We now sell to the public at wholesale prices!
>
>
> http://usahandtools.com/
"DoN. Nichols" <[email protected]> wrote in message
news:[email protected]...
> In article <[email protected]>,
> R.H. <[email protected]> wrote:
> >Just posted more photos and answers to the previous set:
> >
> >http://puzzlephotos.blogspot.com/
>
> Hmm ... 207 looks like some sort of bushing designed to press
> into a hole in wood. Perhaps about something like 1/4"
> through hole to act as some kind of low-duty bearing, or
> perhaps internally threaded beyond the end of the
> currently visible portion of the hole.
Yes, it's an insert nut for assembling furniture.
>
> 208 -- perhaps the winding of wire to bind a small hand broom
> together? Though, depending on the lighting, it could
> perhaps be a rectangular wound spring.
Neither of these.
>
> 209 -- Perhaps something to shape clay on a potter's wheel?
I'm not entirely sure what this is for, the seller had it marked as being a
"founder's tool", which I take to mean for making molds for metal or glass.
But I suppose it could also be used for clay.
>
> 210 -- no guess.
>
> 211 -- ditto
>
> 212 -- Some kind of anvil for forming rings, normally clamped in
> a vise by the square section?
I don't know what this one is, but I believe it was used by a machinist.
>
> Enjoy,
> DoN.
> --
> Email: <[email protected]> | Voice (all times): (703) 938-4564
> (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
> --- Black Holes are where God is dividing by zero ---
In article <[email protected]>,
[email protected] (R.H.) wrote:
>Just posted more photos and answers to the previous set:
>
>http://puzzlephotos.blogspot.com/
207. Christmas tree for tiny, magnetic people.
208. Staple picket fence.
209. Knotmaker's anvil.
210. High-volume apartments for those Christmas tree folks up above.
211. A very thick arrow with holder.
212. Insert from a donut hole puncher.
--
B.B. --I am not a goat! thegoat4 at airmail dot net
http://web2.airmail.net/thegoat4/
"Shirley Bolman" <[email protected]> wrote in message
news:[email protected]...
> 209 - - Looks like a butter paddle. When butter is churned there is
> always a little milk left behind
> so it has to be "washed" so the butter won't spoil rapidly. A small
> amount of water is added to a
> bowl of freshly churned butter and worked into the butter to wash out
> the milk. Kind of like kneading
> bread. But this one looks too worn in the middle for some reason.
> Shirley in Oregon
The seller had six similar tools that he was selling, all marked "founder's
tool". So although it might look like a paddle it was used for something
else.
207. Honestly do not know, but a guess that it might be some type
of threaded insert.
208. Narrow crown staples.
209. Looks to be wooden. I am guessing something used in a
bakery.
210. Coarse toothed wood rasp.
211. Sheet metal bending jig.
212. No earthly idea.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Keep the whole world singing . . . .
DanG (remove the sevens)
[email protected]
"R.H." <[email protected]> wrote in message
news:[email protected]...
> Just posted more photos and answers to the previous set:
>
> http://puzzlephotos.blogspot.com/
"Ron Leap" <[email protected]> wrote in message
news:[email protected]...
> Item 211 is a miniature sanding block. It is part of a set that
> contains several different profiles. I believe the set is still
> available.
This answer is correct.
>
> Item 212 may be a home-made precision straight edge. It looks similar
> to one I have in a DoAll Precision Inspection Kit.
Sounds like a good guess, I'm still not sure what this one is.
>
> I have no idea what Item 202 is, but I am guessing it is some sort of
> kingpin or tie rod end reamer.
>
> Item 209 looks like a worn out sand casting mold ram.
I think this is right.
"DanG" <[email protected]> wrote in message
news:KxYrd.62634$_g6.26342@okepread03...
> 207. Honestly do not know, but a guess that it might be some type
> of threaded insert.
Close enough, it's an insert nut, hammer-in type, threaded on the inside
>
> 208. Narrow crown staples.
They are regular staples, don't know if they're narrow crown
>
> 209. Looks to be wooden. I am guessing something used in a
> bakery.
It's wooden, but it wasn't used in a bakery.
>
> 210. Coarse toothed wood rasp.
Correct.
>
> 211. Sheet metal bending jig.
Nope
>
> 212. No earthly idea.
>
> >I don't know what this one is, but I believe it was used by a machinist.
>
> And it has some kind of marking on the end, presuably the
> machinst's own name, and some cryptic marking. I doubt that he bothered
> to make it too detailed, as *he* knew what he made it for. And while we
> can make guesses, the odds are against figuring exactly what it was for.
>
> Is the cylindrical part tapered? It looks so in the photo,
> bigger at the free end -- but that could be a problem with perspective.
The square end of this one is 15/16" square and says "E. Smith. J." , the
other end is tapered and appears to function as a handle.
>>> 209 -- Perhaps something to shape clay on a potter's wheel?
>>
>>I'm not entirely sure what this is for, the seller had it marked as
>>being a "founder's tool", which I take to mean for making molds for
>>metal or glass. But I suppose it could also be used for clay.
>
> It was just a guess, based on the overall shape, and considering
> that I've never done potter's wheel work.
It doesn't look like any potter's tool that I've seen. I think the mold
making is a closer fit.
Patriarch
"R.H." <[email protected]> writes:
>
>>
>> 209. Looks to be wooden. I am guessing something used in a
>> bakery.
>
>It's wooden, but it wasn't used in a bakery.
Butter or Ice Cream churn paddle?
scott
On 3 Dec 2004 01:28:24 -0800, [email protected] (R.H.) wrote:
>Just posted more photos and answers to the previous set:
>
>http://puzzlephotos.blogspot.com/
207
Is the inside threaded ? Looks like a push-in threaded insert.
209
Leadworkers / plumbers bat / beater for shaping lead sheet. I think
this one is used for forming roof flashing into a collar around a
vertical flue or pipe.
"DanG" <[email protected]> wrote in message news:<KxYrd.62634$_g6.26342@okepread03>...
> 207. Honestly do not know, but a guess that it might be some type
> of threaded insert.
>
> 208. Narrow crown staples.
>
> 209. Looks to be wooden. I am guessing something used in a
> bakery.
>
> 210. Coarse toothed wood rasp.
>
> 211. Sheet metal bending jig.
>
> 212. No earthly idea.
>
>
>
>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Keep the whole world singing . . . .
> DanG (remove the sevens)
> [email protected]
>
>
>
> "R.H." <[email protected]> wrote in message
> news:[email protected]...
> > Just posted more photos and answers to the previous set:
> >
> > http://puzzlephotos.blogspot.com/
____________________________
Click on the below link, you may find some of our specialty handtools
to be of help. We now sell to the public at wholesale prices!
http://usahandtools.com/
In article <[email protected]>,
R.H. <[email protected]> wrote:
>Just posted more photos and answers to the previous set:
>
>http://puzzlephotos.blogspot.com/
Hmm ... 207 looks like some sort of bushing designed to press
into a hole in wood. Perhaps about something like 1/4"
through hole to act as some kind of low-duty bearing, or
perhaps internally threaded beyond the end of the
currently visible portion of the hole.
208 -- perhaps the winding of wire to bind a small hand broom
together? Though, depending on the lighting, it could
perhaps be a rectangular wound spring.
209 -- Perhaps something to shape clay on a potter's wheel?
210 -- no guess.
211 -- ditto
212 -- Some kind of anvil for forming rings, normally clamped in
a vise by the square section?
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
In article <[email protected]>,
R.H. <[email protected]> wrote:
>
>"DoN. Nichols" <[email protected]> wrote in message
>news:[email protected]...
>> In article <[email protected]>,
>> R.H. <[email protected]> wrote:
[ ... ]
>> >http://puzzlephotos.blogspot.com/
[ ... ]
>> 208 -- perhaps the winding of wire to bind a small hand broom
>> together? Though, depending on the lighting, it could
>> perhaps be a rectangular wound spring.
>
>Neither of these.
One of the other answers looks more like it was right, but I'll
wait until I see that answer.
>> 209 -- Perhaps something to shape clay on a potter's wheel?
>
>I'm not entirely sure what this is for, the seller had it marked as being a
>"founder's tool", which I take to mean for making molds for metal or glass.
>But I suppose it could also be used for clay.
It was just a guess, based on the overall shape, and considering
that I've never done potter's wheel work.
[ ... ]
>> 212 -- Some kind of anvil for forming rings, normally clamped in
>> a vise by the square section?
>
>I don't know what this one is, but I believe it was used by a machinist.
And it has some kind of marking on the end, presuably the
machinst's own name, and some cryptic marking. I doubt that he bothered
to make it too detailed, as *he* knew what he made it for. And while we
can make guesses, the odds are against figuring exactly what it was for.
Is the cylindrical part tapered? It looks so in the photo,
bigger at the free end -- but that could be a problem with perspective.
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
"Andy Dingley" <[email protected]> wrote in message
news:[email protected]...
> On 3 Dec 2004 01:28:24 -0800, [email protected] (R.H.) wrote:
>
> >Just posted more photos and answers to the previous set:
> >
> >http://puzzlephotos.blogspot.com/
>
> 207
>
> Is the inside threaded ? Looks like a push-in threaded insert.
Correct, the inside is threaded and it was marked as being hammer-in.
>
> 209
>
> Leadworkers / plumbers bat / beater for shaping lead sheet. I think
> this one is used for forming roof flashing into a collar around a
> vertical flue or pipe.
>
I'll have to get back to you on this one, not sure if it's right or not.
"Scott Lurndal" <[email protected]> wrote in message
news:[email protected]...
> "R.H." <[email protected]> writes:
> >
> >>
> >> 209. Looks to be wooden. I am guessing something used in a
> >> bakery.
> >
> >It's wooden, but it wasn't used in a bakery.
>
> Butter or Ice Cream churn paddle?
Nope, according to the seller it wasn't used as a paddle.