I also got the Bosch 1617evs and I was planning to put in my Wolfcraft
router table. But I got a Freud table and fence for my router. Built
a cabinet to put it on and now feel better about using this beast. I
just felt like I had bycicle tires on a porsche.
Daniel
"Wade Lippman" <[email protected]> wrote in message news:<[email protected]>...
> I know this is a dumb question, but it is worth a try.
> Has anyone found holes that worked for this?
>
> I hope to be getting a better table soon, and don't want to drill any holes
> in the base to accomodate a crappy table.
> Thanks.
"Wade Lippman" <[email protected]> wrote in message
news:[email protected]...
> I know this is a dumb question, but it is worth a try.
> Has anyone found holes that worked for this?
Is it one of the aluminum tables? I have one. I drilled holes in the table
using the Bosch base plate as a template.
Jo
Have this same combination.
Sears sells a blank plate and you have to drill the mounting holes for
router in the plate.
"Wade Lippman" <[email protected]> wrote in message
news:[email protected]...
> I know this is a dumb question, but it is worth a try.
> Has anyone found holes that worked for this?
>
> I hope to be getting a better table soon, and don't want to drill any
holes
> in the base to accomodate a crappy table.
> Thanks.
>
>
Gee, Rumpty, I thought you were going to tell him to get rid
of the router and get a RAS 8~)
--
Erik "Grumpa" Ahrens
Apprentice Termite
I'd much rather be hammered than nailed 8~)
"Rumpty" <[email protected]> wrote in message
news:[email protected]...
| Get yourself a sheet of 3/4 birch ply, a couple of saw
horses and make a
| router table.
|
| --
|
| Rumpty
|
| Radial Arm Saw Forum:
http://forums.delphiforums.com/woodbutcher/start
|
| - - - - - - - - - - - - - - - - - - - - -
|
|
| "Wade Lippman" <[email protected]> wrote in
message
| news:[email protected]...
| > I know this is a dumb question, but it is worth a try.
| > Has anyone found holes that worked for this?
| >
| > I hope to be getting a better table soon, and don't want
to drill any
| holes
| > in the base to accomodate a crappy table.
| > Thanks.
| >
| >
|
|
Get yourself a sheet of 3/4 birch ply, a couple of saw horses and make a
router table.
--
Rumpty
Radial Arm Saw Forum: http://forums.delphiforums.com/woodbutcher/start
- - - - - - - - - - - - - - - - - - - - -
"Wade Lippman" <[email protected]> wrote in message
news:[email protected]...
> I know this is a dumb question, but it is worth a try.
> Has anyone found holes that worked for this?
>
> I hope to be getting a better table soon, and don't want to drill any
holes
> in the base to accomodate a crappy table.
> Thanks.
>
>