I have been considering purchasing a wide drum sander for use in a
home shop, for resawn veneer or highly figured panels which might chip
out in a planer. ANy recommendations on the pros and cons of these
(or other) models?
I was looking at the Performax 16-32 or comparable size units which
are about $800. Thanks.
Jay
Hi Jay,
If you DAGS in the following you will see a lot of good info. Both
machines are ok but they are not thickness sanders and from the posts I
think you will see the Performax pulled ahead for a while but the new
motor has caused some problems. Once I came to accept how little these
machines take off per pass I began appreciate my Delta. Cheers, JG
http://groups.google.ca/groups?hl=en&lr=&ie=UTF-8&group=rec.woodworking
Jay Stalman wrote:
> I have been considering purchasing a wide drum sander for use in a
> home shop, for resawn veneer or highly figured panels which might chip
> out in a planer. ANy recommendations on the pros and cons of these
> (or other) models?
> I was looking at the Performax 16-32 or comparable size units which
> are about $800. Thanks.
> Jay
I have the Performax, It's a great tool.
Dave
"Jay Stalman" <[email protected]> wrote in message
news:[email protected]...
> I have been considering purchasing a wide drum sander for use in a
> home shop, for resawn veneer or highly figured panels which might chip
> out in a planer. ANy recommendations on the pros and cons of these
> (or other) models?
> I was looking at the Performax 16-32 or comparable size units which
> are about $800. Thanks.
> Jay
----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---
The biggest draw back to the Delta is that the table lifts for thickness
adjustment. This becomes a problem if you use infeed or out feed supports
for your wood. You will have to adjust the supports with each thickness
adjustment.
"Jay Stalman" <[email protected]> wrote in message
news:[email protected]...
> I have been considering purchasing a wide drum sander for use in a
> home shop, for resawn veneer or highly figured panels which might chip
> out in a planer. ANy recommendations on the pros and cons of these
> (or other) models?
> I was looking at the Performax 16-32 or comparable size units which
> are about $800. Thanks.
> Jay
Had to make the decision myself a couple of years ago and chose the Delta.
As near as I could tell then, and have found no reason to say things have
changed, both machines perform their basic functions quite well.
I chose the Delta over the Performex because I consider the fixed drum head
design more stable, liked the versatility of the two speeds and, there is
the ability to add a 4" pneumatic drum on the machine. It is an amazingly
handing little option.
So, without taking anything away from the Performax, I've have no regrets
about the decision.
--
Mike G.
[email protected]
Heirloom Woods
www.heirloom-woods.net
"Jay Stalman" <[email protected]> wrote in message
news:[email protected]...
> I have been considering purchasing a wide drum sander for use in a
> home shop, for resawn veneer or highly figured panels which might chip
> out in a planer. ANy recommendations on the pros and cons of these
> (or other) models?
> I was looking at the Performax 16-32 or comparable size units which
> are about $800. Thanks.
> Jay