Handscrew Clamp Kits

Thanks much for the info - looks like I'll be avoiding them. A few
years back I had a couple of Sears handscrew clamps fail when the pot
metal pivots cracked where they were threaded. I've since learned to
look for the machine turned ends and avoid the cheap junk. It's not
worth it in the long run.

Cliff


On Tue, 08 Nov 2005 15:02:07 -0600, cdo <[email protected]> wrote:

>Does anyone out there have any experience with the handscrew clamp
>kits from Woodstock International or Steelex...

cdo wrote:
> Does anyone out there have any experience with the handscrew clamp
> kits from Woodstock International or Steelex (they appear to be the
> same) and how they compare to the kits from Jorgensen? Do they have
> Acme threaded rod or just standard triangular threads?
>
> Also, what sources are available for the Jorgensen kits? I've had
> little success finding suppliers for them (USA), and keep coming
> across the Woodstock product.
>
> thanks...
>
>
> cdo

I bought 4 of those kits (The Woodstock International/Shop Fox) from
Grizzly a few months ago, but I haven't made the clamps yet. Paid about
$5 each. They have standard (triangular) threads.

--Steve

I found them here:
http://woodworker.com/cgi-bin/FULLPRES.exe?PARTNUM=125-055
But they're 3x the price of the Steelex kits, and almost as much as
the complete jorgie clamp on amazon.

I use some HF ones(triangle threads) which I got at a half off sale.
They work ok for me.

Art

"cdo" <[email protected]> wrote in message
news:[email protected]...
> Does anyone out there have any experience with the handscrew clamp
> kits from Woodstock International or Steelex (they appear to be the
> same) and how they compare to the kits from Jorgensen? Do they have
> Acme threaded rod or just standard triangular threads?
>
> Also, what sources are available for the Jorgensen kits? I've had
> little success finding suppliers for them (USA), and keep coming
> across the Woodstock product.
>
> thanks...
>
>
> cdo

You might try taking a gander at the fully made ones at Japan Woodworker,
very nice prices, though you may want to ask them about the threads. they also
sell the USA made Dubuque brand which are nicer priced than the Jorgensens
elswhere. I have two (older NOS) Woocraft brand 12"ers that I am more than
positive were made by Dubuque, with acme type threading and are *quite*
well made. What woodcraft has now as their own brand are not USA made
and they don't explain the threads.

The thing about the Dubuques is that the whole clamp costs the same as the
Jorgensen kits that don't have the wood.

--
Alex - "newbie_neander" woodworker
cravdraa_at-yahoo_dot-com
not my site: http://www.e-sword.net/

Thanks for the info Alex. I like Japan Woodworker (my chesels are from
there), but their pricing for most western tools is usually higher
than many other dealers. I did a search for the Dubuque brand and
found somewhat better pricing here:

http://www.thebestthings.com/newtools/screwclamps.htm

They also have the best Lie-Nielsen pricing I've found too...

Thanks again,

Cliff




On Wed, 9 Nov 2005 21:21:51 -0800, "AAvK" <[email protected]> wrote:

>
>You might try taking a gander at the fully made ones at Japan Woodworker,
>very nice prices, though you may want to ask them about the threads. they also
>sell the USA made Dubuque brand which are nicer priced than the Jorgensens
>elswhere. I have two (older NOS) Woocraft brand 12"ers that I am more than
>positive were made by Dubuque, with acme type threading and are *quite*
>well made. What woodcraft has now as their own brand are not USA made
>and they don't explain the threads.
>
>The thing about the Dubuques is that the whole clamp costs the same as the
>Jorgensen kits that don't have the wood.