Does anybody know where i can get free (or paid-for) plans for optimal
firewood pieces? ;-)
Are all the woodworkers here needing plans for every little oiece they
build? If i start a woodworking project i usually think asbout it,
then start building considering available material without bothering
about ready-made plans...
--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23
Tue, Jun 22, 2004, 11:28am (EDT+6) [email protected]
(Juergen=A0Hannappel) asks:
<snip> Are all the woodworkers here needing plans for every little oiece
they build? If i start a woodworking project i usually think asbout it,
then start building considering available material without bothering
about ready-made plans...
I think the operational word is "think".
Too many people "think" they can't do something, without actually just
sitting down and thinking about it for a bit. I figure a lot of the
questions asked here are not thought about, just asked. Most of them,
if the person just went into the bathroom, sat there for a bit, and
thought about it, they'd come up with the answer on their own. But,
they don't, they hit the keyboard, and ask someelse to think for them.
A huge amount of times, a simple google search would answer their
question too; but, they don't bother with that either, and spend a day
or two getting an answer that should have only taken a minute or two.
I love plans, especially free plans. They're great for
inspiration. Plus, it's not always fun, reinventing the wheel. But, I
usually modify plans when I do use any. Mostly I just do about like
you. A few times, I don't even make rough sketches, just take a few
measurements, and have at it.
JOAT
Use your brain - it's the small things that count.
- Bazooka Joe
Behind that tree over there. Of course, you have to fell the tree to get
'em....
Do you start Physics experiments without consulting the literature?
"Juergen Hannappel" <[email protected]> wrote in message
news:[email protected]...
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
>
> Are all the woodworkers here needing plans for every little oiece they
> build? If i start a woodworking project i usually think asbout it,
> then start building considering available material without bothering
> about ready-made plans...
> --
I'll trade some free plans for tomato stakes for your firewood plans. :-)
"Juergen Hannappel" <[email protected]> wrote in message
news:[email protected]...
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
>
> Are all the woodworkers here needing plans for every little oiece they
> build? If i start a woodworking project i usually think asbout it,
> then start building considering available material without bothering
> about ready-made plans...
> --
> Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
> mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
> Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
> CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23
What's a metric cord? Or do they use that unit?
Here, it's a nominal 128 cf, though I've seen some truly creative
stacking....
"Daniel" <[email protected]> wrote in message
news:[email protected]...
>
> Considering that firewood is measured in units of "cord"s, you may
> want to cut your logs to lengths of 1ft or 2ft to facilitate piling it
> up and measuring it accurately. Make sure to allow for some kerf when
> sawing.
> http://hearth.com/what/firewood.html
>
> Ends of logs don't need to be coated; you want faster drying, and
> end-checking should not detrimentally affect the end purpose of the
> wood.
>
>
>
>
>
>
>
>
> :) :) :) :)
All right! Thought I was one of the only lazy enough to buy those lidded
boxes to work as drawers. Did mine as tall rows each side of a two door
cabinet section , the whole at the height of my tablesaw. I just roll it
out for plywood support rather than calling for SWMBO, who has a tendency to
pull rather than just support. Stores a mortiser sans handle and my power
sanders with paper in the cabinets.
12 boxes.
Oh yeah, to halve fractions double the denominator. You are over thirty,
and therefore know what a denominator is?
Of course, half of five centimeters is two and a half centimeters....
"Mark Jerde" <[email protected]> wrote in message
news:[email protected]...
> I just bought 20 see-through plastic boxes to help bring some organization
> to my messy shop. When I build the roll-around cabinet for them I'll
decide
> on the size by putting the boxes on the 2'x4' MDF sheets I have for the
> project. If I decide 3 boxes wide is the best size for space & materials,
> I'll set the fence on the TS by putting 3 boxes + 1 board (for dados)
> between the blade & the fence. I enjoy "build to fit."
>
> Besides, I'm not all that good at 8th's & 16th's etc. Measure (wrong)
> twice, cut once, cuss when it doesn't fit, adjust the plans or cut another
> piece... <g> I should probably throw away my English tape measures & buy
> metric. ;-)
On Tue, 22 Jun 2004 11:28:15 +0200, Juergen Hannappel
<[email protected]> vaguely proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
It all depends on the style and dimensions of the firebox you asked
about in rec.crafts.metalworking
>Does anybody know where i can get free (or paid-for) plans for optimal
>firewood pieces? ;-)
I have to say that I have built some obscene failures by trying your
method. But the one time I tried to follow the rules of a plan from a
magazine, they fucked it. I ended up with dining chairs with 12" legs,
or something.
I am glad you can get by on your own. It is an adventure in life that
I espouse, but that my espoused does not always appreciate.
Tue, Jun 22, 2004, 11:28am (EDT+6) [email protected]
(Juergen=A0Hannappel) asks:
Does anybody know where i can get free (or paid-for) plans for optimal
firewood pieces? ;-) <snip>
Reminds of of the farmer, who cut 10 cords of wood a year, to last
thru the winter, all by hand. He could usually cut a cord a day.
His son figured that was too much work for him, so bought him a
chainsaw. The old man was sceptical, but the son told him he could
probably cut all his wood in less than 2 day with it. So the old man
agreed to try it out.
The old man told his son, the chainsaw just wasn't working right at
all, he was not happy. Took him all day to cut just a quarter cord of
wood, and he was totally exhausted from it. The son said that wasn't
right, and told h im to take in to the store where he bought it, and
have them check it out.
The old man got to the store, told them his problems. The repair
guy, said, "I'll check it out", and pulled the cord. The saw started up
with a loud roar, and the old man went about 3 feet straight up,
yelling, "What's that noise?".
JOAT
Use your brain - it's the small things that count.
- Bazooka Joe
Juergen Hannappel bragged in message news:
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
>
> Are all the woodworkers here needing plans for every little oiece they
> build? If i start a woodworking project i usually think asbout it,
> then start building considering available material without bothering
> about ready-made plans...
Well, good on you! Do you feel appropriately superior now that you've
said this? Do you feel a need to try to belittle those who enjoy the
hobby of building but don't (or don't yet) have the ability to design
in their heads (or on paper for that metter)? Various folks have made
this same type of statement numerous times on this newsgroup and I
have yet to understand why they seem to feel so superior or why they
feel the need to somehow mock those who don't "do" design. To me this
is kind of like people in a skiing group trying to make fun of people
who ski but don't make their own skis or a golf group wondering why
all golfers don't design their own courses.
Man, I just went on and on, didn't I ;) I guess you hit a nerve since
I am not the designing type but still like to build stuff. If it is
much more complex than a box, I like some direction. Some of the best
cooks I know still own some cookbooks and don't just open the fridge
and start pulling out whatever is there to create some new dish for
that evening's dinner party.
Dave Hall
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Juergen Hannappel" <[email protected]> wrote in message
> news:[email protected]...
> > Does anybody know where i can get free (or paid-for) plans for optimal
> > firewood pieces? ;-)
> >
> > Are all the woodworkers here needing plans for every little oiece they
> > build? If i start a woodworking project i usually think asbout it,
> > then start building considering available material without bothering
> > about ready-made plans...
>
>
> So Doc, are you asking how to turn your projects that were built with out
> plans in to fire wood? Or do you think that you would build better
> firewood if you used plans?
i think a lot of people got fished in here...
randy
Why yes, yes I do.
Here is one:
http://www.woodheat.org/firewood/stacking.htm
and another with nice line drawings:
http://www.gransfors.com/htm_eng/yxboken/bok04.htm
--
********
Bill Pounds
http://www.billpounds.com
"Juergen Hannappel" <[email protected]> wrote in message
news:[email protected]...
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
Well then, how do you know you are doing it right? :)
--
********
Bill Pounds
http://www.billpounds.com
"Rick Gibson" <[email protected]> wrote in message
news:[email protected]...
> I use plans for a lot of things I build and for some I don't but I have to
> say I have never needed a plan for firewood yet!
> Seem to do that every time I build something.
>
> Rick
>
>
> "Juergen Hannappel" <[email protected]> wrote in message
> news:[email protected]...
> > Does anybody know where i can get free (or paid-for) plans for optimal
> > firewood pieces? ;-)
> >
> > Are all the woodworkers here needing plans for every little oiece they
> > build? If i start a woodworking project i usually think asbout it,
> > then start building considering available material without bothering
> > about ready-made plans...
> > --
> > Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
> > mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
> > Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
> > CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23
>
>
On Tue, 22 Jun 2004 11:28:15 +0200, Juergen Hannappel
<[email protected]> calmly ranted:
>Does anybody know where i can get free (or paid-for) plans for optimal
>firewood pieces? ;-)
I'll bet you actually get answers from those who have sought
them out before, J.
>Are all the woodworkers here needing plans for every little oiece they
>build? If i start a woodworking project i usually think asbout it,
>then start building considering available material without bothering
>about ready-made plans...
Ditto here. For the last little project, I started with the opening.
I knew the guitar string winder had to fit the machine knob so I
measured that and built a hole to suit.
------------------------------------------------------
No matter how hard you try, you cannot baptize a cat.
----------------------------
http://www.diversify.com Comprehensive Website Development
---------------------------------------------------
Juergen Hannappel wrote:
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
>
> Are all the woodworkers here needing plans for every little oiece they
> build? If i start a woodworking project i usually think asbout it,
> then start building considering available material without bothering
> about ready-made plans...
That's fine if you have the experience to do that. Lot of people don't.
And sometimes building from plans leads you to try a new technique called
for in the plans that you then have in your repertoire for future use. And
sometimes it's kind of nice to be able to show SWMBO what it's going to
look like so you don't sleep on the couch until it's done in punishment for
spending for a couple of hundred board feet of teak.
--
--John
Reply to jclarke at ae tee tee global dot net
(was jclarke at eye bee em dot net)
Juergen Hannappel <[email protected]> wrote in message news:<[email protected]>...
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
[snip]
Considering that firewood is measured in units of "cord"s, you may
want to cut your logs to lengths of 1ft or 2ft to facilitate piling it
up and measuring it accurately. Make sure to allow for some kerf when
sawing.
http://hearth.com/what/firewood.html
Ends of logs don't need to be coated; you want faster drying, and
end-checking should not detrimentally affect the end purpose of the
wood.
:) :) :) :)
Juergen Hannappel wrote:
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
Optimal for what? <g> Completeness of burn, fewest fireplace / stove loads
per day, least expensive, least pollutants released, most heat released?
Is your fireplace / stove / furnace left or right tilt?
> Are all the woodworkers here needing plans for every little oiece they
> build? If i start a woodworking project i usually think asbout it,
> then start building considering available material without bothering
> about ready-made plans...
Nah, I build a lot of stuff by TLAR -- That Looks About Right. For example
I just bought 20 see-through plastic boxes to help bring some organization
to my messy shop. When I build the roll-around cabinet for them I'll decide
on the size by putting the boxes on the 2'x4' MDF sheets I have for the
project. If I decide 3 boxes wide is the best size for space & materials,
I'll set the fence on the TS by putting 3 boxes + 1 board (for dados)
between the blade & the fence. I enjoy "build to fit."
Besides, I'm not all that good at 8th's & 16th's etc. Measure (wrong)
twice, cut once, cuss when it doesn't fit, adjust the plans or cut another
piece... <g> I should probably throw away my English tape measures & buy
metric. ;-)
-- Mark
I almost always build from plans. I draw them myself.
"Juergen Hannappel" <[email protected]> wrote in message
news:[email protected]...
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
>
> Are all the woodworkers here needing plans for every little oiece they
> build? If i start a woodworking project i usually think asbout it,
> then start building considering available material without bothering
> about ready-made plans...
> --
> Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
> mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
> Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
> CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23
"Juergen Hannappel" <[email protected]> wrote in message
news:[email protected]...
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
>
> Are all the woodworkers here needing plans for every little oiece they
> build? If i start a woodworking project i usually think asbout it,
> then start building considering available material without bothering
> about ready-made plans...
So Doc, are you asking how to turn your projects that were built with out
plans in to fire wood? Or do you think that you would build better
firewood if you used plans?
I use plans for a lot of things I build and for some I don't but I have to
say I have never needed a plan for firewood yet!
Seem to do that every time I build something.
Rick
"Juergen Hannappel" <[email protected]> wrote in message
news:[email protected]...
> Does anybody know where i can get free (or paid-for) plans for optimal
> firewood pieces? ;-)
>
> Are all the woodworkers here needing plans for every little oiece they
> build? If i start a woodworking project i usually think asbout it,
> then start building considering available material without bothering
> about ready-made plans...
> --
> Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
> mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
> Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
> CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23
"George" <george@least> writes:
[...]
>
> Do you start Physics experiments without consulting the literature?
No. But there is *some* difference in complexity.
[...]
>> build? If i start a woodworking project i usually think asbout it,
>> then start building considering available material without bothering
>> about ready-made plans...
>> --
>
>
--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23