Sounds like a good time for that CA glue. I do that all the time.
Just remember to put something between your skin and the wood before you
hold it to cure.
DAMHIKT.
"roo" <[email protected]> wrote in message
news:[email protected]...
> I have a a beautiful piece of new base molding that has a minor flaw:
> There's a very thin ribbon of wood that has separated midspan. I'm
> afraid that if I sand it away it may look bad. Would it be better to
> glue it down before I stain & sand it? Any other suggestions?
>
> Thanks.
"George" <george@least> wrote in news:[email protected]:
> Sounds like a good time for that CA glue. I do that all the time.
>
> Just remember to put something between your skin and the wood before you
> hold it to cure.
> DAMHIKT.
>
> "roo" <[email protected]> wrote in message
> news:[email protected]...
>> I have a a beautiful piece of new base molding that has a minor flaw:
>> There's a very thin ribbon of wood that has separated midspan. I'm
>> afraid that if I sand it away it may look bad. Would it be better to
>> glue it down before I stain & sand it? Any other suggestions?
>>
>> Thanks.
>
>
When I worked at HP in 1972 the super-glue was pretty new. We had rather
big bottles of it and sometimes it was a little sloppy in application. A
friend of mine found out the hard way when she got glued to another line
worker in a machine. Their hands were joined together and at that time we
didn't know that acetone was the solvent, so they used razor blades to -
carefully- cut the two apart!
--
John Snow
"If I knew what I was doing, I wouldn't be here"
Yeah, nobody likes finger-jointed moldings :-)
In article <[email protected]>, "George" <george@least>
wrote:
> Sounds like a good time for that CA glue. I do that all the time.
>
> Just remember to put something between your skin and the wood before you
> hold it to cure.
> DAMHIKT.
>
> "roo" <[email protected]> wrote in message
> news:[email protected]...
> > I have a a beautiful piece of new base molding that has a minor flaw:
> > There's a very thin ribbon of wood that has separated midspan. I'm
> > afraid that if I sand it away it may look bad. Would it be better to
> > glue it down before I stain & sand it? Any other suggestions?
> >
> > Thanks.