Jack Adkins wrote:
> im am an engineer after all...lol
And you need plans? I thought engineers designed things.
I hope you don't do bridges.
--
Ed
[email protected]
http://pages.cthome.net/edhome
Jack Adkins asks:
> have been looking for Plans on a Enterment Center for 55" Projection TV.
Large shovel, hole about 5' x 5' x 6'.
Shouldn't be too hard to modify a pleasing present plan. Look for free plans
through google, but spell it "entertainment center plans."
Charlie Self
"All you need in this life is ignorance and confidence, and then success is
sure."
Mark Twain
http://hometown.aol.com/charliediy/myhomepage/business.html
Go have a look at these, it should be easy to scale them to your TV and go
from there... just wing it!
http://www.thebigscreenstore.com/html/walls.html
"Jack Adkins" <[email protected]> wrote in message
news:[email protected]...
> ok ok I understand....I want to make one but would like the plans
free...im
> am an engineer after all...lol
>
> Jack
>
>
> "Mark Hopkins" <[email protected]> wrote in message
> news:[email protected]...
> > Expensive? I only have about $38 in my Mitsubishi 61" ... It was dead
when
> I
> > got it, had sound but no picture and I dropped in on some tv repair
forums
> > and got some exceptional guidance to repair it. (and I am no expert by
any
> > means, just knew how to use a volt/ohm meter)
> >
> > The superbowl is gonna look real good on this baby while I munch on a
> > steak.... Anyone want to trade for a Powermatic 3520A or a Oneway
lathe?
> >
> > "Eric Lund" <[email protected]> wrote in message
> > news:[email protected]...
> > >
> > > "Jack Adkins" <[email protected]> wrote in message
> > > news:[email protected]...
> > > > I have been looking for Plans on a Enterment Center for 55"
Projection
> > TV.
> > > > I Want one that has a bridge between two tall cabnets and a shelf in
> the
> > > > middle. There doesnt seem to be any available, at least that are
free,
> > > > online.
> > > >
> > > > Jack
> > > >
> > > >
> > >
> > > You can afford a 55" projection TV and you are worried about $20 for a
> set
> > > of plans? Perspective.
> > >
> > > Cheers,
> > > Eric
> > >
> > >
> >
> >
> >
>
>
"Jack Adkins" <[email protected]> wrote in message
news:[email protected]...
> I have been looking for Plans on a Enterment Center for 55" Projection TV.
> I Want one that has a bridge between two tall cabnets and a shelf in the
> middle. There doesnt seem to be any available, at least that are free,
> online.
>
> Jack
>
>
You can afford a 55" projection TV and you are worried about $20 for a set
of plans? Perspective.
Cheers,
Eric
ok ok I understand....I want to make one but would like the plans free...im
am an engineer after all...lol
Jack
"Mark Hopkins" <[email protected]> wrote in message
news:[email protected]...
> Expensive? I only have about $38 in my Mitsubishi 61" ... It was dead when
I
> got it, had sound but no picture and I dropped in on some tv repair forums
> and got some exceptional guidance to repair it. (and I am no expert by any
> means, just knew how to use a volt/ohm meter)
>
> The superbowl is gonna look real good on this baby while I munch on a
> steak.... Anyone want to trade for a Powermatic 3520A or a Oneway lathe?
>
> "Eric Lund" <[email protected]> wrote in message
> news:[email protected]...
> >
> > "Jack Adkins" <[email protected]> wrote in message
> > news:[email protected]...
> > > I have been looking for Plans on a Enterment Center for 55" Projection
> TV.
> > > I Want one that has a bridge between two tall cabnets and a shelf in
the
> > > middle. There doesnt seem to be any available, at least that are free,
> > > online.
> > >
> > > Jack
> > >
> > >
> >
> > You can afford a 55" projection TV and you are worried about $20 for a
set
> > of plans? Perspective.
> >
> > Cheers,
> > Eric
> >
> >
>
>
>
>>
>
>You can afford a 55" projection TV and you are worried about $20 for a set
>of plans? Perspective.
>
>Cheers,
>Eric
>
\
==================
Well maybe it is just a matter of principle .... lol..
BUT seriously all we are talking about here is a box ...why not just
take a pencil and draw your own....
Bob Griffiths
Expensive? I only have about $38 in my Mitsubishi 61" ... It was dead when I
got it, had sound but no picture and I dropped in on some tv repair forums
and got some exceptional guidance to repair it. (and I am no expert by any
means, just knew how to use a volt/ohm meter)
The superbowl is gonna look real good on this baby while I munch on a
steak.... Anyone want to trade for a Powermatic 3520A or a Oneway lathe?
"Eric Lund" <[email protected]> wrote in message
news:[email protected]...
>
> "Jack Adkins" <[email protected]> wrote in message
> news:[email protected]...
> > I have been looking for Plans on a Enterment Center for 55" Projection
TV.
> > I Want one that has a bridge between two tall cabnets and a shelf in the
> > middle. There doesnt seem to be any available, at least that are free,
> > online.
> >
> > Jack
> >
> >
>
> You can afford a 55" projection TV and you are worried about $20 for a set
> of plans? Perspective.
>
> Cheers,
> Eric
>
>