I wouldn't think of teasing you...
<grin> Really, they have them!
"KYHighlander" <[email protected]> wrote in message
news:[email protected]...
> dido Mike I think he's teasing us.
>
> --
>
> http://users.adelphia.net/~kyhighland
>
>
> "Mike in Idaho" <[email protected]> wrote in message
> news:[email protected]...
> > I tried to search for pocket screws and came up empty. Any tips on
where
> to
> > find them on the site?
> >
> > Thanks,
> > Mike
> >
> > "Mark Hopkins" <[email protected]> wrote in message
> > news:[email protected]...
> > > Someone was looking for a source for pocket screws a few days ago
during
> > the
> > > flurry of spam.
> > > I have used these folks for a few years now. Box of 1000 runs around
> > $10.00
> > > http://www.hghhardware.com/
> > >
> > >
> >
> >
>
>
Greetings,
This URL has Kreg Pocket Hole Screws and the site seems to
work well. I have not actually ordered from this site yet:
http://www.cheyennesales.com/catalog/kregscrews.htm
This URL has links to their on line catalog,
which has links to Pocket Hole Screws, but takes
a long time to respond sometimes. They have
little folders on the catalog page, but when you open
a folder, you might get nothing. If you click on one of
the little page icons, such as "Hardwood Screws" you do
get a page you can use to order screws or other products.
The Screw icon a the top of the page produces a page with
useful information about the screws and how to set up the jig.
http://www.kregtool.com/
You could also wait for the WoodWorking Show near you
or call contact Kreg directly.
Kreg Tool Company
201 Campus Drive
Huxley, IA 50124
800-447-8638
fax 515-597-2354
Sincerely,
Bill Thomas
Mark Hopkins wrote:
> Someone was looking for a source for pocket screws a few days ago during the
> flurry of spam.
> I have used these folks for a few years now. Box of 1000 runs around $10.00
> http://www.hghhardware.com/
>
>
I thought so too, but it will let you in...just hit enter...
"Stephen M" <[email protected]> wrote in message
news:[email protected]...
> I tried to peak, but you need to "register" to browse the catalogue
>
> Or did I miss something? That's a real turn-off for me.
>
> "Mark Hopkins" <[email protected]> wrote in message
> news:[email protected]...
> > Someone was looking for a source for pocket screws a few days ago during
> the
> > flurry of spam.
> > I have used these folks for a few years now. Box of 1000 runs around
> $10.00
> > http://www.hghhardware.com/
> >
> >
>
>
Call them. I just bought two boxes from them last week. They are just around
the corner from me so I didn't bother ordering them online.
"Mike in Idaho" <[email protected]> wrote in message
news:[email protected]...
> I tried to search for pocket screws and came up empty. Any tips on where
to
> find them on the site?
>
> Thanks,
> Mike
>
> "Mark Hopkins" <[email protected]> wrote in message
> news:[email protected]...
> > Someone was looking for a source for pocket screws a few days ago during
> the
> > flurry of spam.
> > I have used these folks for a few years now. Box of 1000 runs around
> $10.00
> > http://www.hghhardware.com/
> >
> >
>
>
dido Mike I think he's teasing us.
--
http://users.adelphia.net/~kyhighland
"Mike in Idaho" <[email protected]> wrote in message
news:[email protected]...
> I tried to search for pocket screws and came up empty. Any tips on where
to
> find them on the site?
>
> Thanks,
> Mike
>
> "Mark Hopkins" <[email protected]> wrote in message
> news:[email protected]...
> > Someone was looking for a source for pocket screws a few days ago during
> the
> > flurry of spam.
> > I have used these folks for a few years now. Box of 1000 runs around
> $10.00
> > http://www.hghhardware.com/
> >
> >
>
>
"James D Kountz" wrote in message
> heh heh, yeah swingman its kinda slow at the ol shop today.
Know the feeling ... parts all cut, working against a deadline, got the
rarely used plate jointer out to cut biscuit slots and noticed the fence was
cracked so it wouldn't sit flat. Porter Cable is sending the $12 part by
donkey to their outlet here in Houston for my pickup.
Hmmmm ... wonder if a loose tenon/5/8" spline will work in 1/2" thick
material? It's not like I don't have plenty of time for the glue to dry on a
test joint ... and if there ever was perfect shop weather going to waste,
this is it ... a breezy 72 and sunny.
--
www.e-woodshop.net
Last update: 2/13/04
I found putting screws in your pocket was a very bad thing. They poked right
through my pants and left puncture wounds!
Jim
"Mark Hopkins" <[email protected]> wrote in message
news:[email protected]...
> Someone was looking for a source for pocket screws a few days ago during
the
> flurry of spam.
> I have used these folks for a few years now. Box of 1000 runs around
$10.00
> http://www.hghhardware.com/
>
>
I tried to peak, but you need to "register" to browse the catalogue
Or did I miss something? That's a real turn-off for me.
"Mark Hopkins" <[email protected]> wrote in message
news:[email protected]...
> Someone was looking for a source for pocket screws a few days ago during
the
> flurry of spam.
> I have used these folks for a few years now. Box of 1000 runs around
$10.00
> http://www.hghhardware.com/
>
>
"James D Kountz" <jkountz(remove this here)@citlink.net> wrote in message
news:[email protected]...
> I found putting screws in your pocket was a very bad thing. They poked
right
> through my pants and left puncture wounds!
Got some time on your hands today, eh Jim? :) Reminds me of getting short
drywall screws out of a nail pouch ... gingerly.
--
www.e-woodshop.net
Last update: 2/13/04
They have lots of other hardware too. Hinges, drawer slides, other hardware
as well...
"James D Kountz" <jkountz(remove this here)@citlink.net> wrote in message
news:[email protected]...
> heh heh, yeah swingman its kinda slow at the ol shop today. I guess I
should
> thank Mark for his link though, lots of folks here that use those screws
and
> would like to get a good deal on them Im sure. Thanks Mark!
>
> Jim
>
>
> "Swingman" <[email protected]> wrote in message
> news:[email protected]...
> >
> > Got some time on your hands today, eh Jim? :) Reminds me of getting
short
> > drywall screws out of a nail pouch ... gingerly.
> >
> > --
> > www.e-woodshop.net
> > Last update: 2/13/04
> >
> >
> >
>
>
Buy larger pants or shorter screws. You could also lose some weight so those
pants don't fit so tight... <grin>
"James D Kountz" <jkountz(remove this here)@citlink.net> wrote in message
news:[email protected]...
> I found putting screws in your pocket was a very bad thing. They poked
right
> through my pants and left puncture wounds!
>
> Jim
>
>
> "Mark Hopkins" <[email protected]> wrote in message
> news:[email protected]...
> > Someone was looking for a source for pocket screws a few days ago during
> the
> > flurry of spam.
> > I have used these folks for a few years now. Box of 1000 runs around
> $10.00
> > http://www.hghhardware.com/
> >
> >
>
>
heh heh, yeah swingman its kinda slow at the ol shop today. I guess I should
thank Mark for his link though, lots of folks here that use those screws and
would like to get a good deal on them Im sure. Thanks Mark!
Jim
"Swingman" <[email protected]> wrote in message
news:[email protected]...
>
> Got some time on your hands today, eh Jim? :) Reminds me of getting short
> drywall screws out of a nail pouch ... gingerly.
>
> --
> www.e-woodshop.net
> Last update: 2/13/04
>
>
>
I tried to search for pocket screws and came up empty. Any tips on where to
find them on the site?
Thanks,
Mike
"Mark Hopkins" <[email protected]> wrote in message
news:[email protected]...
> Someone was looking for a source for pocket screws a few days ago during
the
> flurry of spam.
> I have used these folks for a few years now. Box of 1000 runs around
$10.00
> http://www.hghhardware.com/
>
>