works fine with Firebird 0.7 also
Do you need a CDL to move that around? how long is it?
BRuce
Mark & Juanita wrote:
> In article <[email protected]>,
> [email protected] says...
>
>>[email protected] (rob) wrote in news:53d7bded.0401300908.e2ad636
>>@posting.google.com:
>>
>
> ... snip
>
>>>http://robandkaren.webhop.org/woodshop.htm
>>>
>
> ... snip
>
>>You need to fix your webpage if you want it to work in anything other
>>than IE...
>>
>>On your links to your images, you have, for example, "media\images
>>\woodworking\shop\workbench.jpg"
>>
>>You need to reverse all the slashes in all your image links...
>>
>>from:
>>"media\images\woodworking\shop\workbench.jpg"
>>
>>to:
>>"media/images/woodworking/shop/workbench.jpg"
>>
>>IE is very forgiving, probably too forgiving of errors like this. Other
>>broswers are not.
>>
>>
>
>
> Had no problem seeing anything with Mozilla.
--
---
BRuce
[email protected] (rob) wrote in message news:<[email protected]>...
> Hey gang,
> If anyone would like to take a look, I have pics of my completed
> tablesaw station here:
>
> http://robandkaren.webhop.org/woodshop.htm
YOWSA! That's it! That's what I want!
My new Jet contractors saw just shipped in, and I want to build up a
saw station like this. Good job!
On 30 Jan 2004 09:08:40 -0800, [email protected] (rob) wrote:
I too have a Mule's TS fence, Crapsman TS, Hitachi M12V router with
Lee Valley router insert. My mobile TS very similar to yours (smaller)
and still under construction.
May I ask you where did you buy the leveling bolts for the mobile TS
cabinet and how much?
I truly admire your setup and handicraft. Thanks, for showing it to
us.
>http://robandkaren.webhop.org/woodshop.htm
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Thanks for the tip! I'll fix er up promptly.
stickdoctorq <[email protected]> wrote in message news:<[email protected]>...
> [email protected] (rob) wrote in news:53d7bded.0401300908.e2ad636
> @posting.google.com:
>
> > Hey gang,
> > If anyone would like to take a look, I have pics of my completed
> > tablesaw station here:
> >
> > http://robandkaren.webhop.org/woodshop.htm
> >
> > Still to add :
> > - removable outfeed table.
> > - removable mount for Incra jig.
> > - overarm blade guard w/ dust collection.
> >
> > Comments or ideas welcome. Thanks!
> >
>
> You need to fix your webpage if you want it to work in anything other
> than IE...
>
> On your links to your images, you have, for example, "media\images
> \woodworking\shop\workbench.jpg"
>
> You need to reverse all the slashes in all your image links...
>
> from:
> "media\images\woodworking\shop\workbench.jpg"
>
> to:
> "media/images/woodworking/shop/workbench.jpg"
>
> IE is very forgiving, probably too forgiving of errors like this. Other
> broswers are not.
"Frank Ketchum" <[email protected]> wrote in message news:<[email protected]>...
> "rob" <[email protected]> wrote in message
> news:[email protected]...
> > Hey gang,
> > If anyone would like to take a look, I have pics of my completed
> > tablesaw station here:
> >
> > http://robandkaren.webhop.org/woodshop.htm
> >
> > Still to add :
> > - removable outfeed table.
> > - removable mount for Incra jig.
> > - overarm blade guard w/ dust collection.
> >
> > Comments or ideas welcome. Thanks!
>
> Looks great! I like the magnetic back you put on your tablesaw. Does it
> help alot with dust collection? Do you just remove it when you tilt the
> blade?
>
> Frank
Yup, you have to remove it when you tilt the blade, but that's not
very often for me. It does indeed help a lot with dust collection. I
used to get a ton of dust out the back of the saw.
[email protected] (John Beadles) wrote in message news:<[email protected]>...
> [email protected] (rob) wrote in message news:<[email protected]>...
> > Hey gang,
> > If anyone would like to take a look, I have pics of my completed
> > tablesaw station here:
> >
> > http://robandkaren.webhop.org/woodshop.htm
>
> YOWSA! That's it! That's what I want!
>
> My new Jet contractors saw just shipped in, and I want to build up a
> saw station like this. Good job!
Thanks for the comments gang. Glad you liked it.
"rob" <[email protected]> wrote in message
news:[email protected]...
> Hey gang,
> If anyone would like to take a look, I have pics of my completed
> tablesaw station here:
>
> http://robandkaren.webhop.org/woodshop.htm
>
> Still to add :
> - removable outfeed table.
> - removable mount for Incra jig.
> - overarm blade guard w/ dust collection.
>
> Comments or ideas welcome. Thanks!
Looks great! I like the magnetic back you put on your tablesaw. Does it
help alot with dust collection? Do you just remove it when you tilt the
blade?
Frank
[email protected] (rob) wrote in news:53d7bded.0401300908.e2ad636
@posting.google.com:
> Hey gang,
> If anyone would like to take a look, I have pics of my completed
> tablesaw station here:
>
> http://robandkaren.webhop.org/woodshop.htm
>
> Still to add :
> - removable outfeed table.
> - removable mount for Incra jig.
> - overarm blade guard w/ dust collection.
>
> Comments or ideas welcome. Thanks!
>
You need to fix your webpage if you want it to work in anything other
than IE...
On your links to your images, you have, for example, "media\images
\woodworking\shop\workbench.jpg"
You need to reverse all the slashes in all your image links...
from:
"media\images\woodworking\shop\workbench.jpg"
to:
"media/images/woodworking/shop/workbench.jpg"
IE is very forgiving, probably too forgiving of errors like this. Other
broswers are not.
Hello Rob;
Very nice work indeed! Thanks for sharing with us. Gives me some
incentive to start on one of my own.
Thanks again for sharing,
WoodworkerDan
Dan Harriman
Orange, Texas
[email protected] (rob) wrote in
news:[email protected]:
> Hey gang,
> If anyone would like to take a look, I have pics of my completed
> tablesaw station here:
>
> http://robandkaren.webhop.org/woodshop.htm
>
>
> Comments or ideas welcome. Thanks!
"rob" <[email protected]> wrote in message
news:[email protected]...
>
>
> Hey gang,
> If anyone would like to take a look, I have pics of my completed
> tablesaw station here:
>
> http://robandkaren.webhop.org/woodshop.htm
Very nice Rob. I'd say you're getting your money's worth from the
subscription.
Popped over to some of the other projects. Your son's crib looks fantastic!
Nice job!
In article <[email protected]>,
[email protected] says...
> [email protected] (rob) wrote in news:53d7bded.0401300908.e2ad636
> @posting.google.com:
>
... snip
> >
> > http://robandkaren.webhop.org/woodshop.htm
> >
... snip
>
> You need to fix your webpage if you want it to work in anything other
> than IE...
>
> On your links to your images, you have, for example, "media\images
> \woodworking\shop\workbench.jpg"
>
> You need to reverse all the slashes in all your image links...
>
> from:
> "media\images\woodworking\shop\workbench.jpg"
>
> to:
> "media/images/woodworking/shop/workbench.jpg"
>
> IE is very forgiving, probably too forgiving of errors like this. Other
> broswers are not.
>
>
Had no problem seeing anything with Mozilla.
Very nice setup, very nice cabinets and bench. But don't try to tell
me that is a 12" drill press when I can see by your own ruler over the
bench that it is probably only one inch!
[email protected] (rob) wrote:
>Hey gang,
> If anyone would like to take a look, I have pics of my completed
>tablesaw station here:
>
>http://robandkaren.webhop.org/woodshop.htm
>
>Still to add :
>- removable outfeed table.
>- removable mount for Incra jig.
>- overarm blade guard w/ dust collection.
>
>Comments or ideas welcome. Thanks!