I plane an edge straight with a #7 plane and run that side against the
fence.
"Paul" <[email protected]> wrote in message
news:[email protected]...
> I do not have access to a jointer. I need to true the edge of rough
> sawn lumber. Can this be done somehow on a table saw? If so how do I
> build a jig to accomplish this?
> Paul
there are also available at woodcraft and others a set of clamps called
jointer clamps for this purpose.
--
http://users.adelphia.net/~kyhighland
"Preston Andreas" <[email protected]> wrote in message
news:[email protected]...
> Cut a piece of 3/4" plywood 8' long by about 8" wide. Put a 1x2 fence
along
> one edge. Put the rough sawn board against the fence (concave side to the
> fence) and clamp it down. I use toggle clamps that are attached to the
> fence. You run the fence side against the table saw fence and straighten
> one edge of the rough sawn lumber.
>
> Preston
>
> "Paul" <[email protected]> wrote in message
> news:[email protected]...
> > I do not have access to a jointer. I need to true the edge of rough
> > sawn lumber. Can this be done somehow on a table saw? If so how do I
> > build a jig to accomplish this?
> > Paul
>
>
Cut a piece of 3/4" plywood 8' long by about 8" wide. Put a 1x2 fence along
one edge. Put the rough sawn board against the fence (concave side to the
fence) and clamp it down. I use toggle clamps that are attached to the
fence. You run the fence side against the table saw fence and straighten
one edge of the rough sawn lumber.
Preston
"Paul" <[email protected]> wrote in message
news:[email protected]...
> I do not have access to a jointer. I need to true the edge of rough
> sawn lumber. Can this be done somehow on a table saw? If so how do I
> build a jig to accomplish this?
> Paul
http://www.amazon.com/exec/obidos/ASIN/B0000223V5/qid%3D1077567659/sr%3D11-1/ref%3Dsr%5F11%5F1/104-4660908-3181514
Paul wrote:
> I do not have access to a jointer. I need to true the edge of rough
> sawn lumber. Can this be done somehow on a table saw? If so how do I
> build a jig to accomplish this?
> Paul