Keeping Moisture out.....

Our Company Liquiguard Technologies Inc. is an innovator of new and
unique protective coatings for use on everyday objects and specialized
applications. Commonly available coatings have a basic polymer
composition. Liquiguard Technologies coatings are complex formulations
that will meet and exceed the requirements of the job at hand. Most of
our coatings are water based, eco friendly and present no health
hazards. They are clear, non-odorous and contain additives that
discourage the growth of mold, mildew and other fungi. They contain
inhibitors to prevent damage caused by invisible but harmful
ultraviolet rays. Liquiguard Technologies development focus is to
create application specific coatings that are the best in class.
Coatings developed by us utilize the latest innovations in polymer
technology. Our formulations focus on specific groups of materials and
objects that need to be protected from hazards encountered during
every day use. We pride ourselves on developing solutions that are
truly effective and long lasting we have developed a very special
product by the name of Liquitite SF.

Liquitite SF is a clear coating designed to protect and enhance the
longevity of many everyday home and outdoor objects constructed from
metal, wood, stone, brick, concrete, etc. It is totally non-staining
and will not affect the colors or the material being coated. Commonly
available coatings are solvent based and rely on acrylic resins with
limited effectiveness and durability. Liquitite SF represents a new
and unique coating developed to seal and protect objects from the
effects of humidity, moisture and fading. Corrosion, oxidation and
tarnishing can be slowed or inhibited with the use of Liquitite SF SF

Formulated from a blend of complex and innovative new resins,
Liquitite SF is a water based, odorless, non-yellowing and
non-polluting coating unlike any other available in the market today.
More than a moisture repellant it is the first truly protective
coating that can withstand spills of water, beverages, wine and other
everyday products such as sauces, dressings and oil while keeping the
coated objects free from mold, mildew and other fungi. This latter
feature is especially beneficial for canvas coverings and slings used
in boating and outdoor furniture. Liquitite SF contains unique
ultraviolet inhibitors that will protect the objects from damage
caused by exposure to sunlight, thus extending their life. If needed,
coated objects can also be wiped down with warm water and mild
detergents.

Liquitite SF can be sprayed or brushed on to the objects quickly and
easily and will become tack free in 20 to 30 minutes at an ambient
temperature of 77°F. To achieve optimal results, however, a drying
time of approximately 72 hours is recommended. The fully dried
Liquitite SF film is highly durable and will stay in place and
continue to provide optimal protection until physically removed or
rubbed off.

To ensure that yourobjects are fully protected, Liquitite SF contains
a special "tracer dye" that glows when exposed to ultraviolet light.
Missing or inadequate amount of Liquitite SF can be easily detected by
the absence of the telltale glow when the objects is exposed to a UV
source. If too little Liquitite SF has been applied, simply apply
another coating to correct the problem.

Liquitite SF is 100% water based and is available in aerosol cans,
quart, gallon and five gallon containers. Aerosol cans contain solvent
based propellants. Larger packing sizes contain concentrates which
must be diluted with tap water. The recommended dilution is 2 or 3
parts of water to 1 part of concentrate.

To remove Liquitite SF coating from treated surfaces, use warm water
and mild detergents or isopropyl alcohol. Do not use corrosive
cleaners or strong solvents.

Liquitite SF is non-toxic and environmentally safe.


PRODUCT USAGE INFO
1. Surface to be laminated must be free of dirt, oil, grease and other
loose debris.
2. Damp or wet objects should be thoroughly dried before coating.
3. Make sure that LiquitieSF and ambient temperature are at 50° F or
higher.
4. Shake the aerosol can well before and frequently during use.
5. Hold the can upright and about 12 inches away from the surface to
be sprayed.
6. Spray from all four sides of the object to be coated to ensure
complete coverage. This constitutes one coating cycle.
7. Porous surfaces may require more than one coating cycle for optimal
protection.
8. Each coating must be partially dry prior to application of
additional coatings.
9. For maximum protection coat all exposed surfaces.

CAUTION: Propellants within the aerosol contain volatile solvents that
can ignite easily. Keep away from open flame sparks or heat. Prolonged
exposure to sunlight may expand the pressurized solvents and the can
could explode. Do not puncture or incinerate. Do not store at
temperatures above 120ºF. Vapor harmful. Use with adequate
ventilation. Avoid contact with eyes and skin and prolonged exposure
to vapors. If swallowed do not induce vomiting. Seek immediate medical
attention.
LEGAL INFO
LIQUIGUARD TECHNOLOGIES, INC. WARRANTIES THAT A PROPERLY COATED OBJECT
WILL NOT SUFFER DAMAGE FROM HUMIDITY, MOISTURE, LIMITED EXPOSURE TO
NON-CORROSIVE LIQUIDS AND ULTRAVIOLET RAYS. USER IS SOLELY RESPONSIBLE
FOR DETERMINING SUITABILITY FOR INTENDED USE AND ASSUMES ALL RISKS IN
CONNECTION THEREWITH OTHER THAN AS WARRANTED HEREIN. WARRANTY EXTENDS
TO ORIGINAL PURCHASER AND MAY NOT BE ASSIGNED OR TRANSFERRED. WARRANTY
DOES NOT APPLY TO COATED OBJECT THAT HAS BEEN REWORKED, PHYSICALLY
DAMAGED OR ABUSED AND PROVIDES NO LIABILITY FOR ANY INCIDENTAL OR
CONSEQUENTIAL LOSS OR DAMAGE TO COATED OBJECTS. THIS LIMITED WARRANTY
IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING
MERCHANTABILITY, FITNESS FOR USE OR FOR A PARTICULAR PURPOSE.

This article is for information purposes only and is not intended to
solicit or sell anything for more information please visit our website
at http://www.Liquiguard.com or email: [email protected]