Hi woodies: I'm looking for t-slot track (aluminum) that will
take a standard 3/4" X 3/8" t-slot miter gauge. In other
words, I want a track that I can inset flush into a jig and
then fit my t-slot miter gauge into. Please note that this
track must have the t-slot at the bottom, in the style as
found in the t-slots on quality table saws. I know that
Rockler and Lee Valley and others offer a 3/4" wide slot
extrusion having a square bottom which will accept a 3/4" wide
standard mitre gauge but I want the t-slot bottom so it can
accept 3/4" t-slot nots (machinist's style). Also please note
that I don't want the t-slot track that takes the 1/4" bolts.
Anyone have information about sources? Thanks.
Eagle America at
http://www.eagleamerica.com/product.asp?pn=415-9242. I just
received a 32" track, cutting pins and sliding fixture
block. I have been very happy with their service.
Frank
"Not4Hire" <[email protected]> wrote in message
news:[email protected]...
> Hi woodies: I'm looking for t-slot track (aluminum) that
> will
> take a standard 3/4" X 3/8" t-slot miter gauge. In other
> words, I want a track that I can inset flush into a jig
> and
> then fit my t-slot miter gauge into. Please note that this
> track must have the t-slot at the bottom, in the style as
> found in the t-slots on quality table saws. I know that
> Rockler and Lee Valley and others offer a 3/4" wide slot
> extrusion having a square bottom which will accept a 3/4"
> wide
> standard mitre gauge but I want the t-slot bottom so it
> can
> accept 3/4" t-slot nots (machinist's style). Also please
> note
> that I don't want the t-slot track that takes the 1/4"
> bolts.
> Anyone have information about sources? Thanks.
"Frank K." <[email protected]> wrote in
news:[email protected]:
> http://www.eagleamerica.com/product.asp?pn=415-9242
Thanks Frank. That's exactly what I was looking for. Much
obliged.
"Bill Leonhardt" <[email protected]> wrote in news:dn22kt$mdv
[email protected]:
> http://www.woodcraft.com/family.aspx?familyid=5121
>
>
>
Thanks Bill. Much obliged.
"Not4Hire" <[email protected]> wrote in message
news:[email protected]...
> Hi woodies: I'm looking for t-slot track (aluminum) that will
> take a standard 3/4" X 3/8" t-slot miter gauge. In other
> words, I want a track that I can inset flush into a jig and
> then fit my t-slot miter gauge into. Please note that this
> track must have the t-slot at the bottom, in the style as
> found in the t-slots on quality table saws. I know that
> Rockler and Lee Valley and others offer a 3/4" wide slot
> extrusion having a square bottom which will accept a 3/4" wide
> standard mitre gauge but I want the t-slot bottom so it can
> accept 3/4" t-slot nots (machinist's style). Also please note
> that I don't want the t-slot track that takes the 1/4" bolts.
> Anyone have information about sources? Thanks.
http://www.woodcraft.com/family.aspx?familyid=5121