On 03/04/06 6:21 PM, RAM³ wrote:
> "Brian Lawson" <[email protected]> wrote in message
> news:[email protected]...
>
>>Hey Nick,
>>
>>Just because of the thread, see the following:
>>
>>Think about this one ! ! ! ! !
>> On Wednesday, April 5 , at two minutes and
>> three seconds after 1:00AM in the morning,
>> the time and date will be--------
>>
>> 01:02:03
>> 04/05/06.
>>
>>A unique incident..........
>>Never to be seen again.
>
>
> Sure it will - in 2106, 2206, 2306, 2406,...10006 or until the IRS gets off
> Willie Nelson's back!
>
If you follow the UK method of writing dates it will also occur on the
4th of May this year!
Rich Grise writes:
> #629 - Pinball shooter knob. The pointy end is to hurt your hand
> if you whap it for that extra power shot (which could damage the
> machine). ;-)
Or how about an umbrella handle?
--
Mark Brader, Toronto, [email protected]
"Have you ever heard [my honesty] questioned?"
"I never even heard it mentioned." -- Every Day's a Holiday
R.H. <[email protected]> wrote:
> http://puzzlephotos.blogspot.com/
I thought: Finally one I can completely answer. But no, one is missing.
:-(
624: the purpose is for messuring into corners
625: NOT a gang spill, but an axle of a big wooden wheel
626: a plumbline
627: a "folding bone" (We call it that way). Draw/press a groove with
the tip in paper and fold it there. It is NOT a letter opener.
628: A cutting tool. First it looks like a scraper for metal, but I
think it is for wood turning and there to cut holes.
629: A spring loaded knob. :-)
Nick
--
Motor Modelle // Engine Models
http://www.motor-manufaktur.de
DIY-DRO // Eigenbau-Digitalanzeige
http://www.yadro.de
Nick Müller <[email protected]> wrote:
> 625: NOT a gang spill, but an axle of a big wooden wheel
~~~~
hub I meant, not axle.
Nick
--
Motor Modelle // Engine Models
http://www.motor-manufaktur.de
DIY-DRO // Eigenbau-Digitalanzeige
http://www.yadro.de
James R. Freeman <[email protected]> wrote:
> Nick:
> You might want to check the date on Your computer. It is on day behind
> or the post from You was in the news group limbo for all-most 23 Hrs.
I'm using a time server, so it should be right on my Mac.
But yes, I'm in a different time zone than you are. Central European
Time & 1 hour daylight saving. So it is GMT +2:00
Nick
--
Motor Modelle // Engine Models
http://www.motor-manufaktur.de
DIY-DRO // Eigenbau-Digitalanzeige
http://www.yadro.de
Juergen Hannappel <[email protected]> wrote:
> The hour, minute and second seem to be right, but the day is not,
Now today is the first of april and saturday. Here in Germany at least.
My computer says 4/1. My previous posting was on friday and that was the
31. of march. That perfectly matches the postings' headers.
And Jürgen, what are _you_ doing _here_? Coming over from woodworking?
:-))
> and that is no April fools joke.
really?
Nick
--
Motor Modelle // Engine Models
http://www.motor-manufaktur.de
DIY-DRO // Eigenbau-Digitalanzeige
http://www.yadro.de
"Brian Lawson" <[email protected]> wrote in message
news:[email protected]...
> Hey Nick,
>
> Just because of the thread, see the following:
>
> Think about this one ! ! ! ! !
> On Wednesday, April 5 , at two minutes and
> three seconds after 1:00AM in the morning,
> the time and date will be--------
>
> 01:02:03
> 04/05/06.
>
> A unique incident..........
> Never to be seen again.
Sure it will - in 2106, 2206, 2306, 2406,...10006 or until the IRS gets off
Willie Nelson's back!
Brian Lawson wrote: (and top-posted)
>
> Just because of the thread, see the following:
>
> Think about this one ! ! ! ! !
> On Wednesday, April 5 , at two minutes and
> three seconds after 1:00AM in the morning,
> the time and date will be--------
2006-04-06 01:02:03 Lets have some standards. ISO etc.
>
> 01:02:03
> 04/05/06.
Your reply belongs after (or intermixed with) the quoted material,
after snipping anything not germane.
--
"If you want to post a followup via groups.google.com, don't use
the broken "Reply" link at the bottom of the article. Click on
"show options" at the top of the article, then click on the
"Reply" at the bottom of the article headers." - Keith Thompson
More details at: <http://cfaj.freeshell.org/google/>
Also see <http://www.safalra.com/special/googlegroupsreply/>
According to R.H. <[email protected]>:
> This week's set has just been posted:
>
> http://puzzlephotos.blogspot.com/
As usual, I'm positing from rec.crafts.metalworking.
624) The purpose of the rear extension is to allow measurement
between two vertical surfaces such as walls. More recent
tape measures have a flat bottom and square back corner, with a
marking on the case telling to add 2" (or whatever) for inside
measurements.
This one has a set of markers on the other end of the short stub
to serve as index marks from which the measurement to which five
inches should be added are to be taken.
625) This looks like the top part of an old ship's capstan. The
bars are plugged into the "pigenholes" to allow the sailors to
turn the whole. Below the part shown should be a waisted spool
for the line (or chain), and a ratchet on the deck with
reversible pawls engaging that to prevent unintended back
spinning.
626) Perhaps a match safe for camping?
627) Hmm ... missing what I would expect to allow it to be a shuttle
for weaving fishnets, so that isn't it.
Perhaps used for threading rope through a seam at the top of a
bag closed by a drawrope?
628) Perhaps some form of inside bearing scraper?
629) Perhaps a curtain rod which is held into dimples in the window
frame by the spring pushing the shallow cone into pre-made
sockets?
Now to post this, and see what others have said.
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
625. Wagon wheel hub. These were usually made of Elm
and judging from the size I'd guess it is from a large cargo
wagon, perhaps an ore hauler.
628. Babbitt Bearing scraper.
http://www.martindaleco.com/pdfs/Other_Products/Bearing%20Scrapers.pdf
Art
"R.H." <[email protected]> wrote in message
news:[email protected]...
> This week's set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
> Rob
>
>
on 03/04/2006 or, 04/03/2006??=20
Brian Lawson mentioned ....
Think about this one ! ! ! ! !=20
On Wednesday, April 5 , at two minutes and=20
three seconds after 1:00AM in the morning,=20
the time and date will be--------
01:02:03
04/05/06. =20
=20
A unique incident.......... =20
Never to be seen again.................
John replied , .. with a twinkle in his eye! ...
Aha!, fraid it will good friend, we in the UK put the day before the =
month, so, we'll not see this date until May 4th 2006. For those of you =
that missed this 'unique' event, don't worry ..... it happens again in =
2106! Perhaps we'll miss that one?!! ;-))
Yours in woodsap=20
John
--=20
Remove 'spamfree' to reply
"R.H." <[email protected]> wrote in message
news:[email protected]...
> This week's set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
> Rob
624 Early version for taking inside measurement? Modern versions use the
tape case with a fixed dimension you add to the measurement. With this one
you don't have the square/rectangular case, so the 5" strip is used.
625 You sure it's only 15" tall? Only thing I've seen like this is an
anchor windlass on a sailing ship. Powered by men putting wood bars in the
rectangular slots and walking around it. Picture "appears" to be taken
around a dock or harbor locale as well.
The rest ????????
--
Nahmie
The only road to success is always under construction.
625 Hub for wooden wheel.
"R.H." <[email protected]> wrote in message
news:[email protected]...
> This week's set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
> Rob
>
>
"James R. Freeman" <[email protected]> wrote in message
news:[email protected]...
> 625 Hub for wooden wheel.
>
Yup, I do believe you got it. Sure does resemble a capstan though. Guess my
head was in the wrong pew this morning.
--
Nahmie
The only road to success is always under construction.
Nick:
You might want to check the date on Your computer. It is on day behind
or the post from You was in the news group limbo for all-most 23 Hrs.
Jim
P.S. I do know the location of the date line I have crossed it many times in
the past.
""Nick Müller"" <[email protected]> wrote in message
news:1hd0n3k.i7mpsa1nnrdyhN%[email protected]...
> Nick Müller <[email protected]> wrote:
>
>> 625: NOT a gang spill, but an axle of a big wooden wheel
> ~~~~
>
> hub I meant, not axle.
>
>
> Nick
> --
> Motor Modelle // Engine Models
> http://www.motor-manufaktur.de
> DIY-DRO // Eigenbau-Digitalanzeige
> http://www.yadro.de
"R.H." <[email protected]> wrote:
> This week's set has just been posted:
>
> http://puzzlephotos.blogspot.com/
628. Bearing scraper.
--
Alec McKenzie
usenet@<surname>.me.uk
On Thu, 30 Mar 2006 09:23:40 GMT, "R.H." <[email protected]> wrote:
>This week's set has just been posted:
>
>http://puzzlephotos.blogspot.com/
>
>
>Rob
>
#627 is a bone folder. It's used to rub a crease into a piece of
paper, or to burnish down a glued edge. It can also be used to burnish
gold leaf.
On Thu, 30 Mar 2006 09:23:40 +0000, R.H. wrote:
> This week's set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
Oh Boy! I get to be first on one!
#625 - My first impression was "hibachi", but the other answers
sound more logical.
#626 - Looks vaguely like a plum bob, but why the threaded cap?
#629 - Pinball shooter knob. The pointy end is to hurt your hand
if you whap it for that extra power shot (which could damage the
machine). ;-)
Hey Nick,
Just because of the thread, see the following:
Think about this one ! ! ! ! !
On Wednesday, April 5 , at two minutes and
three seconds after 1:00AM in the morning,
the time and date will be--------
01:02:03
04/05/06.
A unique incident..........
Never to be seen again.
Take care.
Brian Lawson,
Bothwell, Ontario.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
DJ On Sat, 1 Apr 2006 22:19:12 +0200, [email protected] (Nick Müller)
wrote:
>Juergen Hannappel <[email protected]> wrote:
>
>> The hour, minute and second seem to be right, but the day is not,
>
>Now today is the first of april and saturday. Here in Germany at least.
>My computer says 4/1. My previous posting was on friday and that was the
>31. of march. That perfectly matches the postings' headers.
>
>And Jürgen, what are _you_ doing _here_? Coming over from woodworking?
>:-))
>
>
>> and that is no April fools joke.
>
>really?
>
>
>Nick
624. I'm thinking used for tailoring but don't really know.
625. hub of a wagon wheel
627. agate burnisher for embossing paper.
Karl
"R.H." <[email protected]> wrote in message
news:[email protected]...
> This week's set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
> Rob
>
>
"R.H." <[email protected]> wrote in message
news:[email protected]...
> This week's set has just been posted:
>
> http://puzzlephotos.blogspot.com/
>
>
> Rob
>
>
#627 Burnisher. I used this type for burnisher on adhesive backed copper
foil on stained glass.
As usual, none of them went unanswered:
624. The 5" strip on the tape-rule is for inside measurements.
625. Wagon wheel hub
626. Dead drop spike, used by spies as a hiding place for info to be picked
up by someone else.
627. Bone folder, this tool has multiple uses, as seen in several posts in
this thread. Thanks again to Leon for this one.
628. Bearing scraper
629. Pinball launcher
Lots of links and a couple new photos are up on the answer page:
http://pzphotosan110k.blogspot.com/
Rob
[email protected] (Nick Müller) writes:
> James R. Freeman <[email protected]> wrote:
>
>> Nick:
>> You might want to check the date on Your computer. It is on day behind
>> or the post from You was in the news group limbo for all-most 23 Hrs.
>
> I'm using a time server, so it should be right on my Mac.
The hour, minute and second seem to be right, but the day is not, and
that is no April fools joke.
--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23