I got a dovetail jig for Christmas! Frankly, it looks pretty
complicated and formidable (the type of tool that just looks like it
requires considerable foreknowledgde to even start to use it, I mean),
and I hadn't planned to make anything requiring drawers anyway. But
the gift giver will be upset if I don't at least give it a try
so-o-o-o-o . . . Now I've found a good use for those scraps of 3/8"
stock I kept. Practice time!
Please, if anyone has any general hints and helps on this beast . . .
now's the time, guys!
FoggyTown
"Cut to shape . . . pound to fit."
"foggytown" <[email protected]> wrote in message
news:[email protected]...
> I got a dovetail jig for Christmas! Frankly, it looks pretty
> complicated and formidable (the type of tool that just looks like it
> requires considerable foreknowledgde to even start to use it, I mean),
> and I hadn't planned to make anything requiring drawers anyway. But
> the gift giver will be upset if I don't at least give it a try
> so-o-o-o-o . . . Now I've found a good use for those scraps of 3/8"
> stock I kept. Practice time!
>
> Please, if anyone has any general hints and helps on this beast . . .
> now's the time, guys!
>
> FoggyTown
> "Cut to shape . . . pound to fit."
>
Why not start with some simple little boxes. Shoe box size, cigar box size
etc. This should give you the confidence you need and if you can't find a
use for storing your router bits or your screw collection, you can always
give them away. You ought to give a nice specimen to the person that gave
you the jig.
--
Roger Shoaf
About the time I had mastered getting the toothpaste back in the tube, then
they come up with this striped stuff.
I got this one
www.axminster.co.uk/product.asp?pf_id=21973&lkid=29
It's a cheapie which will probably mean there are lots of features I
don't have but it still looks complicated to me. But I'm actually
happier that it isn't one of the all-singing all dancing types because
then if I don't take to it it won't be as much of a waste.
FoggyTown
Oh, I fully intend to keep it and play for several reasons, not least
of which is my fondness for the person who gave it and the person who
chose it. It just seems a trifle daunting to me at the moment but I
have no doubt that I'll be able to go through a small stand of soft
wood in an effort to come to grips with it. Therein lay the adventure,
I guess. And I guess once I know I can make drawers/boxes that have
dovetailed joints, a whole new world of possibilities will open up!
FoggyTown
"Cut to shape . . . pound to fit."
foggytown wrote:
> I got a dovetail jig for Christmas! Frankly, it looks pretty
> complicated and formidable (the type of tool that just looks like it
> requires considerable foreknowledgde to even start to use it, I mean),
> and I hadn't planned to make anything requiring drawers anyway. But
> the gift giver will be upset if I don't at least give it a try
> so-o-o-o-o . . . Now I've found a good use for those scraps of 3/8"
> stock I kept. Practice time!
>
> Please, if anyone has any general hints and helps on this beast . . .
> now's the time, guys!
>
> FoggyTown
> "Cut to shape . . . pound to fit."
Which dovetail jig do you have?
--
Jack Novak
Buffalo, NY - USA
(Remove "SPAM" from email address to reply)
Mark & Juanita <[email protected]> wrote in
news:[email protected]:
<snip>
> I just used mine for half-blind drawer assembly. I'm still not
> satisfied
> with fit. I think the primary problem I had is too much eccentricity
> in the router bit (i.e, not centered well relative to the guide
> bushing). The other problem I'm having is that I'm getting a gap on
> the pin side, don't know yet whether it is flexure while routing, or
> something else. I did find that waxing the fingers helped a lot in
> guiding the router.
>
>
> Now we'll just use some glue to hold things in place until the brads
> dry
>
I've found that, after that, some nice gap-filling epoxy helps
immensely. And it's hard to detect under the polycrap. ;-)
Patriarch
On Sun 26 Dec 2004 05:47:09a, "foggytown" <[email protected]> wrote in
news:[email protected]:
> I got a dovetail jig for Christmas! Frankly, it looks pretty
> complicated and formidable (the type of tool that just looks like it
> requires considerable foreknowledgde to even start to use it, I mean),
> and I hadn't planned to make anything requiring drawers anyway. But
> the gift giver will be upset if I don't at least give it a try
> so-o-o-o-o . . . Now I've found a good use for those scraps of 3/8"
> stock I kept. Practice time!
>
> Please, if anyone has any general hints and helps on this beast . . .
> now's the time, guys!
>
As has been mentioned, there's a few of those out there and they're all
different, so tips would have to be specific to the brand.
As a piece of trivia, however, the teacher for the last class I had at
Woodcraft said he'd bought the Leigh jig and he figured it took him well
over twenty shop hours to learn how to use the thing. He was of the opinion
that even though it had a multitude of uses it was still a bit
overcomplicated for his taste.
The plus side is, he mentioned that to the Woodcraft guys and now he's
teaching classes on how to use the Leigh jig.
On Mon 27 Dec 2004 06:40:51a, "foggytown" <[email protected]> wrote in
news:[email protected]:
> I got this one
>
> www.axminster.co.uk/product.asp?pf_id=21973&lkid=29
>
> It's a cheapie which will probably mean there are lots of features I
> don't have but it still looks complicated to me. But I'm actually
> happier that it isn't one of the all-singing all dancing types because
> then if I don't take to it it won't be as much of a waste.
Hm. Doesnt look THAT cheap. Mostly steel and aluminum, seems like. Takes
templates, can't vary the spacing of the tails and pins like the leigh,
but seems like it'll do the job.
Near as I can figure, where these things shine is when you need a whole
lot of dovetails and don't want to spend a lot of time on them. If you
think it's possible that someday you might be such a situation, don't get
rid of it. I'd hang on to it and play around with it just because I can't
resist new toys. :-)
Like Phisherman, I have other toys further up my wish list than one of
those. A gent's saw and a Frank Klausz video were cheaper :-) and it's
been fun getting the hang of it.
But if somebody gave me a jig like that I'd play with it and keep it
around for reasons already stated. Chances are sooner or later a use
would come up for it.
Oh that's right, you wanted tips. Still don't have any. Sorry.
Well, maybe one. Have fun! I didn't get any neat toys like that this
year. Gotta wait till tax time.
What brand did you get?
Mike
On 26 Dec 2004 03:47:09 -0800, "foggytown" <[email protected]> wrote:
>I got a dovetail jig for Christmas! Frankly, it looks pretty
>complicated and formidable (the type of tool that just looks like it
>requires considerable foreknowledgde to even start to use it, I mean),
>and I hadn't planned to make anything requiring drawers anyway. But
>the gift giver will be upset if I don't at least give it a try
>so-o-o-o-o . . . Now I've found a good use for those scraps of 3/8"
>stock I kept. Practice time!
>
>Please, if anyone has any general hints and helps on this beast . . .
>now's the time, guys!
>
>FoggyTown
>"Cut to shape . . . pound to fit."
On Sun, 26 Dec 2004 20:28:32 GMT, Dan <[email protected]> wrote:
<snip>
>Woodcraft said he'd bought the Leigh jig and he figured it took him well
>over twenty shop hours to learn how to use the thing. He was of the opinion
>that even though it had a multitude of uses it was still a bit
>overcomplicated for his taste.
I would not mind having one and learning how to use it effectively,
but I currently have limited funds. It took me about 14 hours to gain
the skills to make excellent hand cut dovetails with any wood
thickness and any complex angles (such as flared sides for a dry
sink).
On Sun, 26 Dec 2004 20:28:32 GMT, Dan <[email protected]> wrote:
>On Sun 26 Dec 2004 05:47:09a, "foggytown" <[email protected]> wrote in
>news:[email protected]:
>
>> I got a dovetail jig for Christmas! Frankly, it looks pretty
>> complicated and formidable (the type of tool that just looks like it
>> requires considerable foreknowledgde to even start to use it, I mean),
>> and I hadn't planned to make anything requiring drawers anyway. But
>> the gift giver will be upset if I don't at least give it a try
>> so-o-o-o-o . . . Now I've found a good use for those scraps of 3/8"
>> stock I kept. Practice time!
>>
>> Please, if anyone has any general hints and helps on this beast . . .
>> now's the time, guys!
>>
>
>As has been mentioned, there's a few of those out there and they're all
>different, so tips would have to be specific to the brand.
>
>As a piece of trivia, however, the teacher for the last class I had at
>Woodcraft said he'd bought the Leigh jig and he figured it took him well
>over twenty shop hours to learn how to use the thing. He was of the opinion
>that even though it had a multitude of uses it was still a bit
>overcomplicated for his taste.
>
I just used mine for half-blind drawer assembly. I'm still not satisfied
with fit. I think the primary problem I had is too much eccentricity in
the router bit (i.e, not centered well relative to the guide bushing). The
other problem I'm having is that I'm getting a gap on the pin side, don't
know yet whether it is flexure while routing, or something else. I did
find that waxing the fingers helped a lot in guiding the router.
Now we'll just use some glue to hold things in place until the brads dry