"Jerry Gilreath" <[email protected]> wrote in message
news:BJz1c.113121$4o.140898@attbi_s52...
> I just was wondering something. I looked at Delta's website, not in depth,
> and I didn't see a mention of how long the spindles/sleeves were. It said
> from 1/2" to 3" diameter, but that's what my Ridgid does too, but they're
> about 4 1/2 or 5 inches long. Any idea how long the drums are for yours?
I will measure them next time I'm out there and let you know. Seems like
about 4 1/2 though.
> I need another inch or so for some stuff I'm doing
I hope I never come to that realization, don't think Viagra helps there.
KY
"Mark and Kim Smith" <[email protected]> wrote in message
news:[email protected]...
> Jerry Gilreath wrote:
>
> >I just was wondering something. I looked at Delta's website, not in
depth,
> >and I didn't see a mention of how long the spindles/sleeves were. It said
> >from 1/2" to 3" diameter, but that's what my Ridgid does too, but they're
> >about 4 1/2 or 5 inches long. Any idea how long the drums are for yours?
I
> >need another inch or so for some stuff I'm doing.
> >
> >
> It's not easy resisting on that last line.
>
I guess I had no self control
I just was wondering something. I looked at Delta's website, not in depth,
and I didn't see a mention of how long the spindles/sleeves were. It said
from 1/2" to 3" diameter, but that's what my Ridgid does too, but they're
about 4 1/2 or 5 inches long. Any idea how long the drums are for yours? I
need another inch or so for some stuff I'm doing.
--
"Cartoons don't have any deep meaning.
They're just stupid drawings that give you a cheap laugh."
Homer Simpson
Jerry© The Phoneman®
"KYHighlander" <[email protected]> wrote in message
news:[email protected]...
> Yep, the Oscillating spindle sander
>
> --
>
> http://users.adelphia.net/~kyhighland
>
>
> "Jerry Gilreath" <[email protected]> wrote in message
> news:2cv1c.172986$jk2.625770@attbi_s53...
> > Did I read somewhere that you have a Delta boss?
> >
> > --
> > "Cartoons don't have any deep meaning.
> > They're just stupid drawings that give you a cheap laugh."
> > Homer Simpson
> > Jerry© The Phoneman®
> >
> >
>
>
Yep, the Oscillating spindle sander
--
http://users.adelphia.net/~kyhighland
"Jerry Gilreath" <[email protected]> wrote in message
news:2cv1c.172986$jk2.625770@attbi_s53...
> Did I read somewhere that you have a Delta boss?
>
> --
> "Cartoons don't have any deep meaning.
> They're just stupid drawings that give you a cheap laugh."
> Homer Simpson
> Jerry© The Phoneman®
>
>
Jerry Gilreath wrote:
>I just was wondering something. I looked at Delta's website, not in depth,
>and I didn't see a mention of how long the spindles/sleeves were. It said
>from 1/2" to 3" diameter, but that's what my Ridgid does too, but they're
>about 4 1/2 or 5 inches long. Any idea how long the drums are for yours? I
>need another inch or so for some stuff I'm doing.
>
>
It's not easy resisting on that last line.
KYHighlander wrote:
>"Mark and Kim Smith" <[email protected]> wrote in message
>news:[email protected]...
>
>
>>Jerry Gilreath wrote:
>>
>>
>>
>>>I just was wondering something. I looked at Delta's website, not in
>>>
>>>
>depth,
>
>
>>>and I didn't see a mention of how long the spindles/sleeves were. It said
>>>
>>>
>>>from 1/2" to 3" diameter, but that's what my Ridgid does too, but they're
>>
>>
>>>about 4 1/2 or 5 inches long. Any idea how long the drums are for yours?
>>>
>>>
>I
>
>
>>>need another inch or so for some stuff I'm doing.
>>>
>>>
>>>
>>>
>>It's not easy resisting on that last line.
>>
>>
>>
>
>I guess I had no self control
>
>
>
Weeeelll, the important part is that you tried!
On Thu, 04 Mar 2004 06:08:33 GMT, "Jerry Gilreath"
<[email protected]> wrote:
> I need another inch or so for some stuff I'm doing.
According to all of the email spam I get, so does everyone else.
Barry
Well, after I sent it, I too thought about that. "Yea, that's what your wife
says". I know, she says it to my face.
--
"Cartoons don't have any deep meaning.
They're just stupid drawings that give you a cheap laugh."
Homer Simpson
Jerry© The Phoneman®
"Mark and Kim Smith" <[email protected]> wrote in message
news:[email protected]...
> Jerry Gilreath wrote:
>
> >I just was wondering something. I looked at Delta's website, not in
depth,
> >and I didn't see a mention of how long the spindles/sleeves were. It said
> >from 1/2" to 3" diameter, but that's what my Ridgid does too, but they're
> >about 4 1/2 or 5 inches long. Any idea how long the drums are for yours?
I
> >need another inch or so for some stuff I'm doing.
> >
> >
> It's not easy resisting on that last line.
>