I am building a small box (like a finely made jewelery box) and on the 4
vertical corners I want put a rounded Roman like column on each corner edge.
The column would be on order of 5 inches tall Are there products out there
for something like that with a 90 degree cutout that would be glued over
the vertical edge?
any thoughts appreciated.
ok..thanks.. Is IIRC a website or store?
"Victor Radin" <[email protected]> wrote in message
news:[email protected]...
> In article <[email protected]>, [email protected] says...
> > I am building a small box (like a finely made jewelery box) and on the 4
> > vertical corners I want put a rounded Roman like column on each corner
edge.
> > The column would be on order of 5 inches tall Are there products out
there
> > for something like that with a 90 degree cutout that would be glued
over
> > the vertical edge?
> >
> > any thoughts appreciated.
> >
> IIRC it's called "3/4 round moulding" which has the 90* cutout. Might
> have trouble finding the right profile for a roman column so be prepared
> for some carving or machining.
>
> /vic
I should mention, I would design the box to accommodate whatever 3/4 round
molding I can find. I wont do carving or lathe work as I dont have skill to
make them look identicle. If it came to that, I would do something else.
"Victor Radin" <[email protected]> wrote in message
news:[email protected]...
> In article <[email protected]>, [email protected] says...
> > I am building a small box (like a finely made jewelery box) and on the 4
> > vertical corners I want put a rounded Roman like column on each corner
edge.
> > The column would be on order of 5 inches tall Are there products out
there
> > for something like that with a 90 degree cutout that would be glued
over
> > the vertical edge?
> >
> > any thoughts appreciated.
> >
> IIRC it's called "3/4 round moulding" which has the 90* cutout. Might
> have trouble finding the right profile for a roman column so be prepared
> for some carving or machining.
>
> /vic
In article <[email protected]>, [email protected] says...
> I am building a small box (like a finely made jewelery box) and on the 4
> vertical corners I want put a rounded Roman like column on each corner edge.
> The column would be on order of 5 inches tall Are there products out there
> for something like that with a 90 degree cutout that would be glued over
> the vertical edge?
>
> any thoughts appreciated.
>
IIRC it's called "3/4 round moulding" which has the 90* cutout. Might
have trouble finding the right profile for a roman column so be prepared
for some carving or machining.
/vic
consider building up the shape you want from several moldings
On Mon, 16 Feb 2004 19:52:33 GMT, "trents32" <[email protected]> wrote:
>I should mention, I would design the box to accommodate whatever 3/4 round
>molding I can find. I wont do carving or lathe work as I dont have skill to
>make them look identicle. If it came to that, I would do something else.
>"Victor Radin" <[email protected]> wrote in message
>news:[email protected]...
>> In article <[email protected]>, [email protected] says...
>> > I am building a small box (like a finely made jewelery box) and on the 4
>> > vertical corners I want put a rounded Roman like column on each corner
>edge.
>> > The column would be on order of 5 inches tall Are there products out
>there
>> > for something like that with a 90 degree cutout that would be glued
>over
>> > the vertical edge?
>> >
>> > any thoughts appreciated.
>> >
>> IIRC it's called "3/4 round moulding" which has the 90* cutout. Might
>> have trouble finding the right profile for a roman column so be prepared
>> for some carving or machining.
>>
>> /vic
>
"trents32" <[email protected]> wrote in message news:<[email protected]>...
> ok..thanks.. Is IIRC a website or store?
>
> > >
> > IIRC it's called "3/4 round moulding" which has the 90* cutout. Might
> > have trouble finding the right profile for a roman column so be prepared
> > for some carving or machining.
> >
I've seen them at the borg. They might be over by the table legs and
stuff like that.
--
FF
"Jakes452" <[email protected]> wrote in message news:<pefYb.100$Ru5.87@okepread03>...
> what is the borg?
> "Fred the Red Shirt" <[email protected]> wrote in message
> news:[email protected]...
> > "trents32" <[email protected]> wrote in message
> news:<[email protected]>...
> > > ok..thanks.. Is IIRC a website or store?
> > >
> > > > >
> > > > IIRC it's called "3/4 round moulding" which has the 90* cutout. Might
> > > > have trouble finding the right profile for a roman column so be
> prepared
> > > > for some carving or machining.
> > > >
> >
> > I've seen them at the borg. They might be over by the table legs and
> > stuff like that.
> >
Home Depot. They move into an area and assimilate all competition,
like the Borg (e.g. cyborgs) of Star Trek.
--
FF
what is the borg?
"Fred the Red Shirt" <[email protected]> wrote in message
news:[email protected]...
> "trents32" <[email protected]> wrote in message
news:<[email protected]>...
> > ok..thanks.. Is IIRC a website or store?
> >
> > > >
> > > IIRC it's called "3/4 round moulding" which has the 90* cutout. Might
> > > have trouble finding the right profile for a roman column so be
prepared
> > > for some carving or machining.
> > >
>
> I've seen them at the borg. They might be over by the table legs and
> stuff like that.
>
> --
>
> FF
On Mon, 16 Feb 2004 19:44:31 GMT, "trents32" <[email protected]> wrote:
>ok..thanks.. Is IIRC a website or store?
it's an acronym.
If I Recall Correctly
>
>"Victor Radin" <[email protected]> wrote in message
>news:[email protected]...
>> In article <[email protected]>, [email protected] says...
>> > I am building a small box (like a finely made jewelery box) and on the 4
>> > vertical corners I want put a rounded Roman like column on each corner
>edge.
>> > The column would be on order of 5 inches tall Are there products out
>there
>> > for something like that with a 90 degree cutout that would be glued
>over
>> > the vertical edge?
>> >
>> > any thoughts appreciated.
>> >
>> IIRC it's called "3/4 round moulding" which has the 90* cutout. Might
>> have trouble finding the right profile for a roman column so be prepared
>> for some carving or machining.
>>
>> /vic
>
Create the post, then rabbit out the back edge to create the 90degree
cutout
John
On Mon, 16 Feb 2004 18:05:25 GMT, "trents32" <[email protected]> wrote:
>I am building a small box (like a finely made jewelery box) and on the 4
>vertical corners I want put a rounded Roman like column on each corner edge.
>The column would be on order of 5 inches tall Are there products out there
>for something like that with a 90 degree cutout that would be glued over
>the vertical edge?
>
>any thoughts appreciated.
>
>
>