[email protected] wrote:
> Any opinions on the 66 piece mlcs router bit set for $190. It seems like a
> fairly good deal for the weekend woodworker.
> http://mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/set66.htm
> l
Each bit will probably stay sharp as long a razor cartridge.
"bob" <[email protected]> wrote in message
news:[email protected]...
> You won't use 52 of those bits and the quality is so-so. You're better
off
> to buy a dozen high quality bits that you'll use all the time.
>
> B
>
> <[email protected]> wrote in message
> news:[email protected]...
> > Any opinions on the 66 piece mlcs router bit set for $190. It seems like
a
> > fairly good deal for the weekend woodworker.
> >
http://mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/set66.htm
> > l
>
>
In my short tenure thus far making chips and dust as well as mechanicing on
the vehicles or anything else that requires the use of tools I've always
bought what I need when I need it. Course I don't have a huge shop with lots
of storage space. Check-book ain't all that big either. I will splurge once
in awhile when that "too good to pass up" deal comes along (which isn't
often) if I have the spare cash and I know it's something I will use. I
really do not need any more cheap tools. I need stuff that lasts. Besides...
you can buy more stuff if you're not busy buying stuff to replace the stuff
that wasn't good stuff ;-)
Aloha...
Craig
I have about a dozen or so MLCS bits and a few shaper
cutters as well. They are medium duty and not bad for
the price.
That said, I just ordered a bunch of Whiteside bits from
Hartville since they have 20% off this month. The price
difference is not that great, so why not get a quality bit
if you can.
BTW, they also have a starter bit set in their closeout
section for around $60 (1/4, not Whiteside).
Lou
In article <[email protected]>, Edwin Pawlowski
<[email protected]> wrote:
> <[email protected]> wrote in message
> > that's ass backwards thinking. decide what you want to build, then
> > figure out what tools you need to build it. then go get the ones on
> > the list you don't have yet.
>
> Have you never cut a piece of wood and after doing a round-over wondered how
> it would look with a different size? Or a contour instead of a roundover?
> You either have limited imagination, or have an absolute perfect mind for
> design.
>
> OK, they are not the best quality bits, but having a few extras is not such
> a big waste of space.
>
> I'm really happy for you that you can start a project and never make a
> change. I waste a lot of time doing things like that.
>
>
"[email protected]" wrote:
>
> Any opinions on the 66 piece mlcs router bit set for $190. It seems like a
> fairly good deal for the weekend woodworker.
> http://mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/set66.htm
> l
MLCS stuff has had middle-of-the-road ratings for inexpensive bits in
various places I've seen. For occasional use, you'll probably be
happy....it is a lot of profiles for a pretty inexpensive start.
"bob" <[email protected]> wrote in message
news:[email protected]...
> You won't use 52 of those bits and the quality is so-so. You're better
> off to buy a dozen high quality bits that you'll use all the time.
>
The difficulty arises in determining which bits you will be using all the
time since you don't have them to find out.
<[email protected]> wrote in message
news:[email protected]...
> On Sun, 17 Jul 2005 06:28:14 -0400, "George" <George@least> wrote:
>
>>
>>"bob" <[email protected]> wrote in message
>>news:[email protected]...
>>> You won't use 52 of those bits and the quality is so-so. You're better
>>> off to buy a dozen high quality bits that you'll use all the time.
>>>
>>
>>The difficulty arises in determining which bits you will be using all the
>>time since you don't have them to find out.
>>
>
>
> that's ass backwards thinking. decide what you want to build, then
> figure out what tools you need to build it. then go get the ones on
> the list you don't have yet.
>
Nope.
First you learn, then you buy. Unless you're some sort of relative of Bill
Gates.
Never learned a thing from a tool I didn't own....
On Sun, 17 Jul 2005 15:11:52 GMT, "Edwin Pawlowski" <[email protected]>
wrote:
>
><[email protected]> wrote in message
>> that's ass backwards thinking. decide what you want to build, then
>> figure out what tools you need to build it. then go get the ones on
>> the list you don't have yet.
>
>Have you never cut a piece of wood and after doing a round-over wondered how
>it would look with a different size? Or a contour instead of a roundover?
>You either have limited imagination, or have an absolute perfect mind for
>design.
>
>OK, they are not the best quality bits, but having a few extras is not such
>a big waste of space.
>
>I'm really happy for you that you can start a project and never make a
>change. I waste a lot of time doing things like that.
>
okay, go ahead and buy 'em. no skin off of my teeth....
Bye.
<[email protected]> wrote in message
news:[email protected]...
>
> I'll think twice about another post in this group.
>
> Sadly I'm gone.
>
>
"bob" <[email protected]> wrote in message
news:[email protected]...
> You won't use 52 of those bits and the quality is so-so. You're better
> off to buy a dozen high quality bits that you'll use all the time.
>
Other times this issue has come up people have reported that the bits are
smaller than the normal priced mlcs bits.
On Sun, 17 Jul 2005 06:28:14 -0400, "George" <George@least> wrote:
>
>"bob" <[email protected]> wrote in message
>news:[email protected]...
>> You won't use 52 of those bits and the quality is so-so. You're better
>> off to buy a dozen high quality bits that you'll use all the time.
>>
>
>The difficulty arises in determining which bits you will be using all the
>time since you don't have them to find out.
>
that's ass backwards thinking. decide what you want to build, then
figure out what tools you need to build it. then go get the ones on
the list you don't have yet.
if the set was free having a bunch of unused ones sitting around would
just be wasted space, but if you have to pay for them, then they are
both wasted space _and_ wasted money. and being cheapo bits, the ones
you do use will do a lousy job and wear out quickly.
What's happened to the writers in this group? Years ago a question would
get some thoughtful opinion without bitterness and/or personal attacks or
ridicule. That's all I see in this group now.
I know it probably doesn't matter but I'm not rolling in money and I'm
not a novice woodworker. I've been making furniture for our house for ~25
years. I have the basic tools, nothing fancy, and make do most of the
time.
I wanted some honest opinons. For those of you who gave them thanks.
For the others, well I'm glad that your so much superior and better than
me. I wish you well.
I'll think twice about another post in this group.
Sadly I'm gone.
"Dhakala" <[email protected]> wrote in
news:[email protected]:
>
>
> [email protected] wrote:
>> Any opinions on the 66 piece mlcs router bit set for $190. It seems
>> like a fairly good deal for the weekend woodworker.
>> http://mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/set6
>> 6.htm l
>
>
> Each bit will probably stay sharp as long a razor cartridge.
>
<[email protected]> wrote in message
> that's ass backwards thinking. decide what you want to build, then
> figure out what tools you need to build it. then go get the ones on
> the list you don't have yet.
Have you never cut a piece of wood and after doing a round-over wondered how
it would look with a different size? Or a contour instead of a roundover?
You either have limited imagination, or have an absolute perfect mind for
design.
OK, they are not the best quality bits, but having a few extras is not such
a big waste of space.
I'm really happy for you that you can start a project and never make a
change. I waste a lot of time doing things like that.
You won't use 52 of those bits and the quality is so-so. You're better off
to buy a dozen high quality bits that you'll use all the time.
B
<[email protected]> wrote in message
news:[email protected]...
> Any opinions on the 66 piece mlcs router bit set for $190. It seems like a
> fairly good deal for the weekend woodworker.
> http://mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/set66.htm
> l
I always buy the Katanza bits from MLCS. They are as good as anything on the
market.
"MakaNui" <[email protected]> wrote in message
news:1121645329.6874c847ddc60eeb89618720971df41d@teranews...
>
> "bob" <[email protected]> wrote in message
> news:[email protected]...
> > You won't use 52 of those bits and the quality is so-so. You're better
> off
> > to buy a dozen high quality bits that you'll use all the time.
> >
> > B
> >
> > <[email protected]> wrote in message
> > news:[email protected]...
> > > Any opinions on the 66 piece mlcs router bit set for $190. It seems
like
> a
> > > fairly good deal for the weekend woodworker.
> > >
>
http://mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/set66.htm
> > > l
> >
> >
>
> In my short tenure thus far making chips and dust as well as mechanicing
on
> the vehicles or anything else that requires the use of tools I've always
> bought what I need when I need it. Course I don't have a huge shop with
lots
> of storage space. Check-book ain't all that big either. I will splurge
once
> in awhile when that "too good to pass up" deal comes along (which isn't
> often) if I have the spare cash and I know it's something I will use. I
> really do not need any more cheap tools. I need stuff that lasts.
Besides...
> you can buy more stuff if you're not busy buying stuff to replace the
stuff
> that wasn't good stuff ;-)
>
> Aloha...
> Craig
>
>